Bedload Transport in Alluvial Channels

Hydraulic, sediment, land-use, and rock-erosivity data of 22 alluvial streams were used to evaluate conditions of bedload transport and the performance of selected bedload-transport equations. Transport categories of transport-limited (TL), partially transport-limited (PTL), and supply-limited (SL) were identified by a semiquantitative approach that considers hydraulic constraints on sediment movement and the processes that control sediment availability at the basin scale. Equations by Parker et al. in 1982, Schoklitsch in 1962, and Meyer-Peter and Muller in 1948 adequately predicted sediment transport in channels with TL condition, whereas the equations of Bagnold in 1980, and Schoklitsch, in 1962, performed well for PTL and SL conditions. Overall, the equation of Schoklitsch predicted well the measured bedload data for eight of 22 streams, and the Bagnold equation predicted the measured data in seven streams.     

Simulation of toxic gases and vapours removal by activated carbon filters

The system ASC carbon filter/cyanogen chloride was studied by simulation. Three filter configurations and several models, taking into account Langmuir adsorption and second-order reaction between the adsorbed toxic vapour and the active metal on the surface, were developed.The effects of axial dispersion, number of reaction units, film mass transfer units and intraparticle mass transfer resistance on the breakthrough time were studied.Simulation results show that a complex model should be used in order to predict with reasonable accuracy the protection imparted by these filters.     

Mass/heat-exchange network representation of distillation networks

This article introduces the “state space” conceptual framework to process synthesis, which is used to provide a novel representation of a distillation network as a composite heat- and mass-exchange network. This representation suggests that distillation network synthesis may best be viewed as an interacting heat- and mass-exchange network synthesis problem. In that regard, familiar tools (such as pinch diagrams) from both heat-exchange network (HEN) and mass-exchange network (MEN) synthesis are shown to be of use in arriving at energy-efficient distillation network designs. Examples of propylene-propane and solvent-water separations are used to illustrate the proposed conceptual framework.     

Multivariate evaluation of Spanish educational research journals

This paper informs about an evaluation of Spanish educational research journals using the modality of reputation inferred from survey data. Univariate and multivariate patterns are offered. Specifically cluster analysis and non-parametric multidimensional scaling reveal themselves as useful methods to inquire the complexity of this scientometric question which is the evaluation of periodical series. This revised version was published online in June 2006 with corrections to the Cover Date.     

Process heat integration of a heavy crude hydrotreatment plant

The present paper focuses on the study of process alternatives for heat integration of a heavy crude oil hydrotreatment plant. Experimental information obtained from a pilot scale, kinetics and reactor modeling tools, and a commercial process simulator were employed to develop mass and energy balances. Four study cases, which employ a combination of quenching and heat exchangers, were identified and evaluated. The results indicated that the case with two quenches with hydrogen and three heat exchangers is the best process heat integration (PHI) option from an energetic point of view.     

Biofiltration of toluene in the absence and the presence of ethyl acetate under continuous and intermittent loading

BACKGROUND: Two peat biofilters were used for the removal of toluene from air for one year. One biofilter was fed with pure toluene and the other received 1:1 (by weight) ethyl acetate:toluene mixture. RESULTS: The biofilters were operated under continuous loading: the toluene inlet load (IL) at which 80% removal occurred was 116 g m^?3 h^?1 at 57 s gas residence time. Maximum elimination capacity of 360 g m^?3 h^?1 was obtained at an IL of 745 g m^?3 h^?1. The elimination of toluene was inhibited by the presence of ethyl acetate. Intermittent loading, with pollutants supplied for 16 h/day, 5 days/week, did not significantly affect the removal efficiency (RE). Biomass was fully activated in 2 h after night closures, but 6 h were required to recover RE after weekend closures. Live cell density remained relatively constant over the operational period, while the dead cell fraction increased. Finally, a 15 day starvation period was applied and operation then re‐started. Performance was restored with similar re‐acclimatization period to that after weekend closures, and a reduction in dead cell fraction was observed. CONCLUSION: This study demonstrates the capacity of the system to handle intermittent loading conditions that are common in industrial practices, including long‐term starvation. Copyright © 2008 Society of Chemical Industry     

The effect of probability of coalescence on the evolution of bubble sizes in a turbulent pipeline flow: A numerical study

A population balance method in which continuum and discrete phases are integrated is developed to simulate the evolution of polydisperse population of bubbles in a turbulent pipeline flow. The investigation is focused on the effect of the coalescence efficiency on this evolution. A dilute system of bubbles under microgravity conditions is considered. It is found that if the initial coalescence efficiency is low, a slight increase produces a significant effect on the bubble coalescence rate, and thus on the evolution of the population. If, however, the initial coalescence efficiency is high, its increase results in a marginal effect on the way the population evolves. The results of simulations are validated against experimental data on the population mean.     

Karyotype description of Pomacea patula catemacensis (Caenogastropoda, Ampullariidae), with an assessment of the taxonomic status of Pomacea patula.

Mitotic chromosomes of the freshwater snail Pomacea patula catemacensis (Baker 1922) were analyzed on gill tissue of specimens from the type locality (Lake Catemaco, Mexico). The diploid number of chromosomes is 2n = 26, including nine metacentric and four submetacentric pairs; therefore, the fundamental number is FN = 52, No sex chromosomes could be identified. The same chromosome number and morphology were already reported for P. flagellata, i.e., the other species of the genus living in Mexico. The basic haploid number for family Ampullariidae was reported to be n = 14 in the literature; so, its reduction to n = 13 is probably an apomorphy of the Mexican Pomacea snails. Lanistes bolteni, from Egypt, also shows n = 13, but its karyotype is much more asymmetrical, and seems to have evolved independently from P. flagellata and P. patula catemacensis. The nominotypical subspecies, P. patula patula (Reeve 1856), is a poorly known taxon, whose original locality is unknown. A taxonomical account is presented here, and a Mexican origin postulated as the most parsimonious hypothesis.     

Introducing fuzziness in object models and database interfaces through aspects

Imperfection in information can be considered a crosscutting concern that manifests itself in diverse kinds of imprecision, uncertainty, or inconsistency in the data models of a software system. The extension of existing programming and querying interfaces for the different aspects of information imperfection requires a proper modularization of the different concerns of numerical imprecision handling, so that the extensions do not interfere with existing programming practices and do not obscure the original design. Aspect‐oriented design (AOD) enables such a form of nonintrusive extensions to be added to existing software libraries, clearly separating fuzziness or other imperfections in data as a differentiated concern that can be considered from the early phases of development. In this article, a general framework for aspect‐based extension of data models and fuzzy databases is described, and some design and implementation issues of such AOD‐based extensions on OJB database libraries are described as a case study. © 2006 Wiley Periodicals, Inc. Int J Int Syst 21: 1199–1216, 2006.