A rheological study of long branching in polyethylene by blending

Steady shear viscosities, dynamic viscosities and moduli, and the corresponding activation energies for flow were examined for a branched polyethylene, a linear polyethylene, and three of their blends at 150° and 190°C. The polyethylenes were chosen to have closely matched molecular weights and distributions. An R-17 Weissenberg rheogoniometer and an Instron capillary rheometer were used. At lower stress, the branched polymer had a higher viscosity than the linear one, possibly because of the contribution of long branches to entanglements. At high stress, this contribution is reduced and the inherently smaller coil dimensions likely become responsible for the lower viscosity of the branched polymer. The activation energy for the branched polymer is high and decreases with stress, in contrast to the low and almost-constant value for the linear polymer. The effects here of pressure on compression are considered. The entanglements of long branches may also decrease with increasing temperature. With decreasing stress, the activation energy for branched polymer tends to become constant, corresponding to an absence of pressure effects and an equilibrium entanglement of long branches for a given temperature range. The linear relationship between activation energy and blend composition problably means that any compressional effects, like free volume, are additive and that long-branch entanglements rearrange with added linear molecules. The linearity may be the result, in part, of a broad distribution for the lengths of long branches.     

Synthesis,Photochemistry, Computational Study and Potential Application of New Styryl-Thiophene and Naphtho-Thiophene Benzylamines

In this research, the synthesis, photochemistry, and computational study of new cis- and trans-isomers of amino-thienostilbenes is performed to test the efficiency of their production and acid resistance, and to investigate their electronic structure, photoreactivity, photophysical characteristics, and potential biological activity. The electronic structure and conformations of synthesized thienostilbene amines and their photocyclization products are examined computationally, along with molecular modeling of amines possessing two thiophene rings that showed inhibitory potential toward cholinesterases. New amino-styryl thiophenes, with favorable photophysical properties and proven acid resistance, represent model compounds for their water-soluble ammonium salts as potential styryl optical dyes. The comparison with organic dyes possessing a trans-aminostilbene subunit as the scaffold shows that the newly synthesized trans-aminostilbenes have very similar absorbance wavelengths. Furthermore, their functionalized cis-isomers and photocyclization products are good candidates for cholinesterase inhibitors because of the structural similarity of the molecular skeleton to some already proven bioactive derivatives.     

In vitro and in vivo antifungal properties of cysteine proteinase inhibitor from green kiwifruit

BACKGROUND: Higher plants possess several mechanisms of defense against plant pathogens. Proteins actively synthesized in response to those stresses are called defense‐related proteins which, among others, include certain protease inhibitors. It is of particular relevance to investigate plant natural defense mechanisms for pathogen control which include cystatins—specific inhibitors of cysteine proteases. RESULTS: In this study, a cysteine proteinase inhibitor (CPI), 11 kDa in size, was purified from green kiwifruit to homogeneity. Immuno‐tissue print results indicated that CPI is most abundant in the outer layer of pericarp, near the peel, and the inner most part of the pulp—sites where it could act as a natural barrier against pathogens entering the fruit. The purified protein (15 µmol L^?1) showed antifungal activity against two phytopathogenic fungi (Alternaria radicina and Botrytis cinerea) by inhibiting fungal spore germination. In vivo, CPI (10 µmol L^?1) was able to prevent artificial infection of apple and carrot with spore suspension of B. cinerea and A. radicina, respectively. It also exerted activity on both intracellular and fermentation fluid proteinases. CONCLUSION: Identification and characterization of plant defense molecules is the first step towards creation of improved methods for pathogen control based on naturally occurring molecules. Copyright © 2012 Society of Chemical Industry     

The effect of the photopolymerization method on the quality of composite resin samples

Although heart transplantation is by now considered an established procedure in patients with terminal heart failure, there has been a stagnation or even a decline in the number of transplantations performed due to the decreased willingness of the public to provide organs. As a consequence of this development patients have to wait for a donor organ for a much larger time. The aim of this study was to examine patients especially during this very stressful period. From July 1995 to February 1997, 62 patients who had been continuously added to the waiting list were examined regarding their quality of life and emotional state. Completely assessed were 53 patients (participation rate: 85%). As compared to a healthy control group, patients with terminal heart failure on the waiting list reported their quality of life in the physical as well as the psychological area as significantly lower (p < 0.001). The areas of depression (p < 0.001) and anxiety (p < 0.001) also showed a significant difference. There was an obvious correlation (p < 0.01) between the key symptom of terminal heart failure-- dyspnoea--and the measured level of depression. This served to support the notion that there is a connection between the psychological and the somatic state in these severely ill patients. These results point to the necessity of supportive psychotherapeutic treatment during this very stressful time.     

Design parameters of Ti:LiNbO3 waveguides for optimumacoustooptic interaction efficiency

A computer model of optical and surface acoustic wave modes in titanium indiffused Y-cut LiNbO₃ guiding structures is used to produce several graphs for the design of guided-wave acoustooptic devices with optimum interaction characteristics. The design concentrates on waveguide fabrication parameters in order to achieve the optimum acoustic frequency and the acoustooptic interaction bandwidth. The optimum acoustic frequency for a given value of Ti film thickness and diffusion depth is defined as the frequency causing the maximum value of the overlap integral     

Reactionary processes during mechanical treatment of mixtures of ZnO and MnO<Subscript>2</Subscript>. I. Formation of defects and solid solution

Kinetics of defects formation, reaction process and formation of solid solution in powder mixtures of ZnO and MnO₂ induced by prolonged mechanical treatment (MT) have been investigated (X-ray, FTIR, EPR). At MT in zones of deformation-destruction the different defects (\( {\text{V}}_{{\text{Zn}}}^ - :{\text{Zn}}_{\text{i}}^{\text{0}} \) (I), \( {\text{V}}_{{\text{Zn}}}^ - \) (II), and \( {\text{(V}}_{{\text{Zn}}}^ - {\text{)}}_{\text{2}}^ - \) (III) centers at all) are forming. The defects have various physical and chemical properties, and have different activation energies of annealing, E_act The part of these defects is responsible for the processes of hydration and carbonation of samples. In turn, the formation of defects is accompanied by development of various mechanothermical processes, which increase temperature of the sample, T _MT, with the increasing of duration of MT, t _MT. The increasing of t _MT activates the reactionary processes: promotes a consecutive annealing the «low-temperature» defects having small values of E_act (I, II and III) and also leads to formation of Mn²⁺-doped Zn(OH)₂. With the further increase of t _MT, the process of MT is accompanied by an increasing of temperature of samples up to equilibrium, T _eq and accumulation of “high-temperature” defects in the sample. As a result, in the sample the conditions for intensification of volumetric diffusion processes and formation of Mn²⁺-doped ZnO were created.     

The molecular machines of DNA repair: scanning force microscopy analysis of their architecture

The application of scanning force microscope (SFM, also called atomic force microscope or AFM) imaging to study the architecture of proteins and their functional assemblies on DNA has provided new and exciting information on the mechanism of vital cellular processes. Rapid progress in molecular biology has resulted in the identification and isolation of proteins and protein complexes that function in specific DNA transactions. These proteins and protein complexes can now be analysed at the single molecule level, whereby the functional assemblies are often described as nanomachines. Understanding how they work requires understanding their structure and functional arrangement in three dimensions. The SFM is uniquely suited to provide three‐dimensional structural information on biomolecules at nanometre resolution. In this review we focus on recent applications of SFM to reveal detailed information on the architecture and mechanism of action of protein machinery involved in safeguarding genome stability through DNA repair processes.     

System for enhancing supply chain agility through exception handling

With the emergence of a new business era characterized by continuous and unpredictable changes and tough global competition, an agile supply chain has been recognized as a competitive strategy for companies to survive and prosper. Co-OPERATE, an on-going IST project, is aimed at developing concepts and tools for coordination of production planning and control activities in the complex and distributed supply network, and is targeted in the automotive supply and the semiconductor industries. Since the work reported here is based on the project, a framework for manufacturing coordination in the distributed supply network is proposed for the project. As an important part of the project, exception handling is further described. First, through boundary investigation, the scope of this business solution is clarified. Second, a methodology is developed to help understand the mechanism behind the exception handling process. Third, guiding design principles are described to direct the detailed business process design. Finally, rush-order handling is chosen as part of the concept prototype for implementation and evaluation. Extensive feedback from industrial business partners has been collected and taken into account for further implementation.