Attraction of Male European Tarnished Plant Bug, <Emphasis Type="Italic">Lygus rugulipennis</Emphasis> to Components of the Female Sex Pheromone in the Field

Previous work showed that females of the European tarnished plant bug, Lygus rugulipennis Poppius (Heteroptera: Miridae), produced three chemicals, hexyl butyrate, (E)-2-hexenyl butyrate, and (E)-4-oxo-2-hexenal, and that these were suspected to be components of the female sex pheromone. In field experiments, traps baited with blends of these chemicals dispensed from polyethylene vials and sachets failed to catch significant numbers of males. Here, we report more recent field experiments in which the chemicals were released from glass microcapillary tubes. A blend of hexyl butyrate and (E)-4-oxo-2-hexenal was significantly attractive to male L. rugulipennis. In addition, whereas the mixture of all three components attracted fewer L. rugulipennis males, this tertiary blend captured significantly greater numbers of males of the congeneric species Lygus pratensis than the binary mixture. The possible reasons for the success of the microcapillaries compared with other dispensers are discussed.     

Minor components in the sex pheromone of legume podborer: Maruca vitrata development of an attractive blend

The legume podborer, Maruca vitrata (syn. M. testulalis) (F.) (Lepidoptera: Pyralidae) is a pantropical pest of legume crops. Sex pheromone was collected by gland extraction or trapping of volatiles from virgin female moths originating in India, West Africa, or Taiwan. Analysis by GC-EAG and GC-MS confirmed previously published findings that (E,E)-10,12- hexadecadienal is the most abundant EAG-active component with 2–5% of (E,E)-10,12-hexadecadienol also present. At least one other EAG response was detected at retention times typical of monounsaturated hexadecenals or tetradecenyl acetates, but neither could be detected by GC-MS. Laboratory wind-tunnel bioassays and a field bioassay of blends of (E,E)-10,12-hexadecadienal with (E,E)-10,12-hexadecadienol and a range of monounsaturated hexadecenal and tetradecenyl acetate isomers indicated greatest attraction of males was to those including (E,E)-10,12-hexadecadienol and (E)-10-hexadecenal as minor components. In subsequent trapping experiments in cowpea fields in Benin, traps baited with a three-component blend of (E,E)-10,12-hexadecadienal and these two minor components in a 100:5:5 ratio caught significantly more males than traps baited with the major component alone, either two-component blend, or virgin female moths. Further blend optimization experiments did not produce a more attractive blend. No significant differences in catches were found between traps baited with polyethylene vials or rubber septa, or between lures containing 0.01 and 0.1 mg of synthetic pheromone. Significant numbers of female M. vitrata moths, up to 50% of total catches, were trapped with synthetic blends but not with virgin females. At present there is no clear explanation for this almost unprecedented finding, but the phenomenon may improve the predictive power of traps for population monitoring.     

A Flavanone and Two Phenolic Acids from Chrysanthemum morifolium with Phytotoxic and Insect Growth Regulating Activity

Leaves of Chrysanthemum morifolium cv. Ramat were extracted sequentially with hexane, ethyl acetate, and methanol. The methanol fraction, when incorporated into artificial diet was found to reduce the growth of cabbage looper (Trichoplusia ni Hubner) larvae at concentrations between 500 and 5000 ppm of diet. Fractionation of the methanol extract on a Sephadex column yielded five fractions, three of which reduced the weight of larvae relative to the control. One fraction was analyzed using high performance liquid chromatography (HPLC) and found to contain three main constituents. These compounds were purified using a combination of gel permeation chromatography on Sephadex LH20 and HPLC, and analyzed by 1H and 13CNMR as well as undergoing chemical and physical analyses. The compounds were identified as: 1, chlorogenic acid (5-O-caffeoylquinic acid); 2, 3,5-O-dicaffeoylquinic acid; and 3, 3', 4',5-trihydroxyflavanone7-O-glucuronide (eriodictyol7-O-glucuronide). At concentrations between 100 to 1000 ppm these compounds reduced both growth and photosynthesis of Lemna gibba L. with the order of efficacy being: flavanone > chlorogenic acid > 3,5-O-dicaffeoylquinic acid. Furthermore, when incorporated separately into artificial diet these compounds, at 10 to 1000 ppm, enhanced or reduced growth of the cabbage looper (Trichoplusia ni) and gypsy moth (Lymantria dispar L.).     

The application of small angle scattering techniques to porosity characterization in carbons

Small angle scattering (SAS) techniques offer a number of advantages for the investigation of the nature and behavior of porous materials. In particular, with respect to carbons, the essentially non-intrusive nature of SAS means that along with the more traditional, pre- and post-treatment characterization of carbons, in principle, characterization can also be performed in situ during adsorption and activation processes. In the current communication, the application of the techniques of small angle X-ray (SAXS) and neutron (SANS) scattering is reviewed specifically with respect to porosity characterization in carbons. First, the basis of these techniques is presented. More recent applications of SAXS and SANS to carbon porosity are presented, and their relative attributes are contrasted, including the related technique of contrast matching with SANS to distinguish “closed” from “open” porosity, and its application to elucidation of pore development mechanisms. Applications of other related techniques, such as μSAXS and TGA/SAXS, to carbon characterization and porosity development are also discussed.     

Driving as a human: a track learning based adaptable architecture for a car racing controller

We present the evolution and current state of the Mr. Racer car racing controller that excelled at the corresponding TORCS competitions of the last years. Although several heuristics and black-box optimization methods are employed, the basic idea of the controller architecture has been to take over many of the mechanisms human racing drivers apply. They learn the track geometry, plan ahead, and wherever necessary, adapt their plans to the current circumstances quickly. Mr. Racer consists of several modules that have partly been adapted and optimized separately, where the final tuning is usually done with respect to a certain racing track during the warmup phase of the TORCS competitions. We also undertake an experimental evaluation that investigates how the controller profits from adding some of the modules to a basic configuration and which modules are most important for reaching the best possible performance.     

GENERALIZED DERIVATIONS FOR MIXTURES USING THE VIRIAL EQUATION: APPLICATION TO FUGACITY

Calculation of mixture properties using the virial equation of state (VEOS) becomes tedious when the expression contains more than the second virial term. This paper describes a derivation procedure which permits relatively simple extension to any number of virial terms. We have used the fugacity derivation as an example of using the new technique and provide an equation for the fugacity coefficient using any number of terms and any number of components.     

Modification of zeolite surfaces by Grignard reagent

New microporous hybrid organic/inorganic materials were obtained by modification of zeolites using chlorination of their surface, followed by treatment with a Grignard reagent. Loading of butyl groups and retained crystallinity of ZSM-5 type zeolites was higher than for zeolites Y. In contrast to zeolites Y, the lattice parameters of zeolites ZSM-5 increased after surface modification. The obtained hybrid materials on the basis of high-silica zeolites possess a high degree of crystallinity at increased hydrophobicity.     

A biomarker of n−3 compliance in patients taking fish oil for rheumatoid arthritis

Dietary fish oil supplements have been shown to have benefits in rheumatoid arthritis (RA), other inflammatory diseases, and in cardiovascular disease. As with any medical advice, variability will exist with regard to adherence and consequent biochemical or pharmacophysiologic effects. The aim was to explore the utility of plasma phospholipid EPA as a measure of n−3 PUFA intake and response to standardized therapeutic advice given in an outpatient or office practice setting, to increase dietary n−3 PUFA, including a fish oil supplement. Patients with early RA were given verbal and written advice to alter their dietary n−3 PUFA intake, including ingestion of 20 mL of bottled fish oil on juice daily. The advice included instructions to increase n−3 PUFA and to avoid foods rich in n−6 PUFA. Every 3 mon, blood samples were obtained for analysis of plasma phospholipid FA. Plasma phospholipid EPA was used as the primary index of n−3 PUFA intake. A diverse response was seen, with about one-third of patients achieving a substantial elevation of plasma phospholipid EPA over the 12-mon study period. A third had little change, with the remainder achieving intermediate levels. Data obtained longitudinally from individual patients indicated that substantial elevations of EPA (>5% total plasma phospholipid FA) could be maintained for more than 3 yr. Plasma phospholipid EPA is a convenient measure of adherence to advice to take a dietary n−3 PUFA-rich fish oil supplement. This measure may prove a useful adjunct to intention to treat analyses in determining the effect of dietary fish oil supplements on long-term outcomes in arthritis and other chronic inflammatory diseases. It may also provide a guide to the effectiveness of therapeutic and preventive messages designed to increase n−3 PUFA intake.     

Activated gas plasma surface treatment of polymers for adhesive bonding

Polyethylene, polypropylene, poly(vinyl fluoride) (Tedlar), polystyrene, nylon 6, poly(ethylene terephthalate) (Mylar), polycarbonate, cellulose acetate butyrate, and a poly(oxymethylene) copolymer were treated with activated helium and with activated oxygen. Mechanical strengths of adhesive-bonded specimens prepared from treated and from untreated coupons were compared. Polyethylene (PE) and polypropylene (PP) showed the greatest increases in bond strength. Oxygen and helium were both effective with polyethylene, but polypropylene showed no improvement when treated with activated helium. The results with excited helium parallel the effects of ionizing radiation on these two polymers, as does the appearance of unsaturation bands in the infrared (965 cm^?1 in PE, and 887 and 910 cm^?1 in PP). Active nitrogen produced excellent bond strength with polyethylene but not with polypropylene. Of the remaining polymers examined, Tedlar, polystyrene, and nylon 6 showed the greatest improvement in bondability after treatment, and Mylar showed moderate improvement. Polycarbonate, cellulose acetate butyrate, and the poly(oxymethylene) copolymer gave approximately two-fold increases in lap-shear bond strength. In several cases, significant differences in response to time of treatment and type of excited gas were found.     

Electrophilic quinodimethanes

Two new electrophilic monomers, 7,8-di(alkoxycarbonyl)-7,8-dicyanoquinodimethanes, were prepared. These quinodimethanes exhibit moderate electron-acceptor abilities and are highly reactive toward spontaneous homopolymerization in solution as well as in the solid state. Quinodimethane homopolymers were also obtained from heterogeneous spontaneous solution polymerization in the presence of styrene, p-methoxystyrene and isobutyl vinyl ether.