The properties of a laser beam coupled out of a standard unstable laser resonator are heavily dependent on the chosen resonator magnification. A higher magnification results in a higher output coupling and a better beam quality. But in some configurations, an unstable resonator with a low output coupling in combination with a good beam quality is desirable. In order to reduce the output coupling for a particular resonator, magnification fractions of the outcoupled radiation are reflected back into the cavity. In the confocal case, the output mirror consists of a spherical inner section with a high reflectivity and a flat outer section with a partial reflectivity coating. With the application of the unstable resonator with reduced output coupling (URROC), magnification and output coupling can be adjusted independently from each other and it is possible to get a good beam quality and a high power extraction for lasers with a large low gain medium. The feasibility of this resonator design is examined numerically and experimentally with the help of a chemical oxygen iodine laser. 相似文献
The goal of this study was to model and optimize the thermal performance of an unglazed transpired solar collector (UTC) prototype using a full factorial experiment with four factors (hole diameter, absorber coating, irradiation and mass flow rate) at three levels. A quadratic polynomial model for efficiency was shown to explain 95.47% of the variance of thermal output. Residuals analysis and analysis of variance were used to validate the best-fit model. Finally, the model was optimized using response surface representations. An optimal combination of levels of the four parameters was obtained to provide a collector efficiency of 70–80%. The chosen experimental methodology provided accurate characterization of the parameters that have the greatest impact on UTC performance. 相似文献
We have developed a correlation microscopy technique to follow the dynamics of quantum dot labeled DNA within living cells. The temporal correlation functions of the labels reflect the fluctuations of the DNA nanoprobe as a result of its interactions with the cellular environment. They provide a sensitive measure for the length of the probe on the scale of a persistence length (~50 nm) and reveal strong nonthermal dynamics of the cell. These results pave the way for dynamic observations of DNA conformational changes in vivo. 相似文献
In this paper, the theoretical sensitivity limit of the localized surface plasmon resonance (LSPR) to the surrounding dielectric environment is discussed. The presented theoretical analysis of the LSPR phenomenon is based on perturbation theory. Derived results can be further simplified assuming quasistatic limit. The developed theory shows that LSPR has a detection capability limit independent of the particle shape or arrangement. For a given structure, sensitivity is directly proportional to the resonance wavelength and depends on the fraction of the electromagnetic energy confined within the sensing volume. This fraction is always less than unity; therefore, one should not expect to find an optimized nanofeature geometry with a dramatic increase in sensitivity at a given wavelength. All theoretical results are supported by finite-difference time-domain calculations for gold nanoparticles of different geometries (rings, split rings, paired rings, and ring sandwiches). Numerical sensitivity calculations based on the shift of the extinction peak are in good agreement with values estimated by perturbation theory. Numerical analysis shows that, for thin (≤10 nm) analyte layers, sensitivity of the LSPR is comparable with a traditional surface plasmon resonance sensor and LSPR has the potential to be significantly less sensitive to temperature fluctuations. 相似文献
Most experiments on nanopores have concentrated on the pore-forming protein α-haemolysin (αHL) and on artificial pores in solid-state membranes. While biological pores offer an atomically precise structure and the potential for genetic engineering, solid-state nanopores offer durability, size and shape control, and are also better suited for integration into wafer-scale devices. However, each system has significant limitations: αHL is difficult to integrate because it relies on delicate lipid bilayers for mechanical support, and the fabrication of solid-state nanopores with precise dimensions remains challenging. Here we show that these limitations may be overcome by inserting a single αHL pore into a solid-state nanopore. A double-stranded DNA attached to the protein pore is threaded into a solid-state nanopore by electrophoretic translocation. Protein insertion is observed in 30-40% of our attempts, and translocation of single-stranded DNA demonstrates that the hybrid nanopore remains functional. The hybrid structure offers a platform to create wafer-scale device arrays for genomic analysis, including sequencing. 相似文献
Electron microscopy, X-ray diffraction, and atom probe tomography have been used to identify the changes which occur during the tempering of a carbide-free bainitic steel transformed at 473 K (200 °C). Partitioning of solute between ferrite and thin-films of retained austenite was observed on tempering at 673 K (400 °C) for 30 minutes. After tempering at 673 K (400 °C) and 773 K (500 °C) for 30 minutes, cementite was observed in the form of nanometre scale precipitates. Proximity histograms showed that the partitioning of solutes other than silicon from the cementite was slight at 673 K (400 °C) and more obvious at 773 K (500 °C). In both cases, the nanometre scale carbides are greatly depleted in silicon.
The understanding from the conventional geochemistry and geology analysis is very different when trying to apply them to shale gas plays. This paper is a summary for U.S. shale gas plays on geochemistry and geologic analysis application, and real field data from active U.S. shale gas plays is used in the discussion of different concepts. 相似文献
A three-layered composite fibre has been generated via a modified wire-coating melt co-extrusion process. The continuous fibre consists of a thermochromic liquid crystalline (TLC) layer encapsulated between a transparent polypropylene outer sheath and a black polyether ether ketone inner core. The fibres exhibit clear thermochromic behaviour consistent with the behaviour of unincorporated TLCs, and have been formed into a textile. The presence of the black inner core was found to be the key for the clear retention of colour within the fibres against both white and black backgrounds. The temperature-sensitive fibres and textiles can be applied to a variety of thermal mapping applications, such as in the medical and engineering fields, due to the tunable nature of TLCs. 相似文献