Conservative laparoscopic management of a large cornual ectopic pregnancy

Cornual pregnancy traditionally has been treated with laparotomy and either cornual resection or hysterectomy. Recently, more conservative operations have been developed, and operative laparoscopy has provided yet another management option. This report describes the conservative management of a large cornual ectopic pregnancy and reviews the techniques and outcomes of conservative repair that have been described in the literature.     

Will smartwatches last? factors contributing to intention to keep using smart wearable technology

This study aims to deepen our understanding of the underlying factors affecting the intention to continue using increasingly popular wearable technology. A new theoretical model is developed and validated to extend traditional technology acceptance theories by identifying several value drivers of the continuous intention and actual usage of wearable devices. Hypotheses were tested using partial least squares path modeling on data collected from 383 actual smartwatch users. The results provide wearable device manufacturers with practical guidance for optimizing competition strategies. They also offer policy-making insights for practitioners to promote better wearable devices on the market, especially during the early stages of adoption.     

Compact tunable tri-band bandpass filter using varactor diodes for wireless fidelity,wireless local area network,and worldwide interoperability for microwaves access applications

The purpose of this paper is to present a tri-band bandpass filter (BPF) with compact structure. This filter consists of 50 Ω transmission line, varactor diode, positive-intrinsic-negative (PIN) diode, symmetrical square-shaped half-loop resonator pair, and three pairs of rectangular half circle that a T-stub is placed in it. By using the add PIN and varactor diodes in the proposed structure, it is possible to connect and disconnect each band, and change the central frequency up to 400 MHz. In addition, there is a situation to disconnect and connect all three bands simultaneously and asynchronously (unconditionally). This filter contains a low ripple value in all three bands. In this regard, the maximum ripple value does not exceed 0.3 dB and rejection is greater than 25 dB in total stop-band. An experimental tri-band BPF has been developed for wireless fidelity, wireless local area network, and worldwide interoperability for microwaves access applications. The measured results are properly accommodated with simulated results.     

Simultaneous size and geometry optimization of steel trusses under dynamic excitations

During the past decades, the main focus of the research in steel truss optimization has been tailored towards optimal design under static loading conditions and limited work has been devoted to investigating the optimum structural design considering dynamic excitations. This study addresses the simultaneous size and geometry optimization problem of steel truss structures subjected to dynamic excitations. Using the well-known big bang-big crunch algorithm, the minimum-weight design of steel trusses is conducted under both periodic and non-periodic excitations. In the case of periodic excitations, in order to examine the effect of the exciting period of the dynamic load on the final results, the design instances are optimized under different exciting periods and the obtained results are compared. It is observed that by increasing the excitation period of the considered sinusoidal loading as well as the finite rise time of the non-periodic step force, the optimization results approach the minimum design weight obtained under the static loading counterpart. However, in the case of the studied rectangular periodic excitation, the results obtained do not approach the optimum design associated with the static loading case even for higher values of the exciting period.     

Facile Room‐Temperature Anion Exchange Reactions of Inorganic Perovskite Quantum Dots Enabled by a Modular Microfluidic Platform

In an effort to produce the materials of next‐generation photoelectronic devices, postsynthesis halide exchange reactions of perovskite quantum dots are explored to achieve enhanced bandgap tunability. However, comprehensive understanding of the multifaceted halide exchange reactions is inhibited by their vast relevant parameter space and complex reaction network. In this work, a facile room‐temperature strategy is presented for rapid halide exchange of inorganic perovskite quantum dots. A comprehensive understanding of the halide exchange reactions is provided by isolating reaction kinetics from precursor mixing rates utilizing a modular microfluidic platform, Quantum Dot Exchanger (QDExer). The effects of ligand composition and halide salt source on the rate and extent of the halide exchange reactions are illustrated. This fluidic platform offers a unique time‐ and material‐efficient approach for studies of solution phase‐processed colloidal nanocrystals beyond those studied here and may accelerate the discovery and optimization of next‐generation materials for energy technologies.     

Compact ultra‐wideband bandpass filter with variable notch characteristics based on transversal signal‐interaction concepts

A novel technique is presented to design highly compact microstrip ultra‐wideband (UWB) bandpass filters that exhibit high selectivity quasi‐elliptical response. The design is based on transversal signal‐interaction concepts that enable the inclusion of single or dual notch‐bands within the filter's passband to eliminate interference from other services that coexist within the UWB spectrum. The filter configuration comprises of two transmission paths which include folded T‐shaped stepped impedance resonators (SIRs) that are capacitively coupled with the input/output lines to enable signal transmission. It is shown that by combining the filters of different passband centre frequencies an UWB filter can be realised with either a single‐ or dual‐notch function. The theoretical performance of the filter is corroborated via measurements to confirm that the proposed filter exhibits UWB passband of 123% for a 3 dB fractional bandwidth, a flat group‐delay with maximum variation of less than 0.3 ns, passband insertion loss less than 0.94 dB, high selectivity, a sharp rejection notch‐band with attenuation of ?23 dB, and a good overall out‐of‐band performance. Furthermore, the filter occupies a significantly small area of 94 mm² compared with its classical counterparts. © 2014 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:549–559, 2014.     

Establishment of a calibration curve for an isocentric cobalt unit using Monte Carlo simulation

Measurement of dose distribution in patients during radiotherapy is impossible. The Monte Carlo simulation is an alternative method for dose calculations. In routine radiotherapy, the source-to-surface distance(SSD)method is not practical for an isocentric unit because it requires numerous values of tissue–air ratios and inverse square law. Therefore, this method is time consuming. In this paper, the curves of relative depth doses were obtained for three different SSDs using the MCNP4C Monte Carlo simulation and approximated with a single curve called calibration curve. This curve was compared to the curve obtained by published data, differing in approximately 5% in the worst case. It was also observed that the obtained results were more accurate for distances between-5 and 10 cm from source-to-axis distance.     

Rheology of fluids measured by correlation force spectroscopy

We describe a method, correlation force spectrometry (CFS), which characterizes fluids through measurement of the correlations between the thermally stimulated vibrations of two closely spaced micrometer-scale cantilevers in fluid. We discuss a major application: measurement of the rheological properties of fluids at high frequency and high spatial resolution. Use of CFS as a rheometer is validated by comparison between experimental data and finite element modeling of the deterministic ring-down of cantilevers using the known viscosity of fluids. The data can also be accurately fitted using a harmonic oscillator model, which can be used for rapid rheometric measurements after calibration. The method is non-invasive, uses a very small amount of fluid, and has no actively moving parts. It can also be used to analyze the rheology of complex fluids. We use CFS to show that (non-Newtonian) aqueous polyethylene oxide solution can be modeled approximately by incorporating an elastic spring between the cantilevers.     

Unit commitment-based load uncertainties based on improved particle swarm optimisation

This paper presents an intelligent method based on Improved Particle Swarm Optimisation to solve a unit commitment problem that takes into account the uncertainty in the demand. This uncertainty is included in the optimisation problem as a joint chance constraint that bounds the minimum value of the probability to jointly meet the deterministic power balance constraints. The demand is modelled as a multivariate, normally distributed, random variable and the correlation among different time periods is also considered. To demonstrate the effectiveness and robustness of the proposed algorithm, a system with 10 thermal and wind units with various conditions is simulated. The results and numerical experiments are compared with other methods to provide valuable information for both operational and planning problems.     

New design equations for assessment of load carrying capacity of castellated steel beams: a machine learning approach

This paper presents an innovative machine learning approach for the formulation of load carrying capacity of castellated steel beams (CSB). New design equations were developed to predict the load carrying capacity of CSB using linear genetic programming (LGP), and an integrated search algorithm of genetic programming and simulated annealing, called GSA. The load capacity was formulated in terms of the geometrical and mechanical properties of the castellated beams. An extensive trial study was carried out to select the most relevant input variables for the LGP and GSA models. A comprehensive database was gathered from the literature to develop the models. The generalization capabilities of the models were verified via several criteria. The sensitivity of the failure load of CSB to the influencing variables was examined and discussed. The employed machine learning systems were found to be effective methods for evaluating the failure load of CSB. The prediction performance of the optimal LGP model was found to be better than that of the GSA model.