POLYCYCLIC AROMATIC HYDROCARBONS IN PRODUCTS OF A BEET SUGAR FACTORY IN VOJVODINA: LEVELS AND INTAKES

The levels of 16 EPA polycyclic aromatic hydrocarbons (PAHs) were investigated in samples of sugar beets and their products representative for a beet sugar factory located in the central part of Vojvodina, the main agricultural region in Serbia. The sum of the detected PAHs ranged from 51 pg g ^?1 ww for molasses to 391 pg g ^?1 ww for dried sugar beet pulp. The concentration of benzo(a)pyrene (BaP) for all sample types was about or less than 100 pg g ^?1 ww, which is far less than the existing Serbian and EU tolerances set for some foodstuffs. The Serbian intake of BaP via total sugar consumption that ranged from 70–85 g per capita day ^?1 , was assessed to be from 0.029 to 0.035 ng kg ^?1 b.w. day ^?1 . Furthermore, the toxic equivalency factor (TEF) approach was used to estimate the carcinogenicity of PAH mixture found in analyzed samples.     

Chemical composition of Cold Lake bitumen

A detailed analysis has been carried out on the deasphaltened Cold Lake bitumen using two different series of chromatographic separations followed by i.r., u.v., n.m.r. and computerized GC/MS studies of the separated fractions: saturates (21.3), monoaromatics (8.3), diaromatics (3.6), polyaromatics and non-specific polar compounds (24.35), acids (15.2), bases (6.38), and neutral nitrogen compounds (1.15% of bitumen). The acyclic paraffin content of the maltene is low but decidedly higher than in the related Athabasca bitumen, indicating that the Cold Lake bitumen suffered a less complete biodegradation. Straight-chain paraffins and the isoprenoids phytane and pristane are present. The mono- and diaromatic fractions were analysed by high-voltage, low-resolution mass spectrometry. The monoaromatic fraction contains alkylbenzenes, naphthenebenzenes and dinaphthenebenzenes in a ratio of approximately 1:1:1. The ratio for naphthalenes, acenaphthenes + dibenzofurans and fluorenes in the diaromatic fraction is approximately 1:0.9:0.6. The composition of Cold Lake bitumen closely resembles that of the Athabasca bitumen except that its asphaltene content is somewhat lower and its acidic and saturate content is slightly higher.     

Investigations of ductile damage during the process chains of toothed functional components manufactured by sheet-bulk metal forming

Sheet-bulk metal forming processes combine conventional sheet forming processes with bulk forming of sheet semi-finished parts. In these processes the sheets undergo complex forming histories. Due to in- and out-of-plane material flow and large accumulated plastic strains, the conventional failure prediction methods for sheet metal forming such as forming limit curve fall short. As a remedy, damage models can be applied to model damage evolution during those processes. In this study, damage evolution during the production of two different toothed components from DC04 steel is investigated. In both setups, a deep drawn cup is upset to form a circumferential gearing. However, the two final products have different dimensions and forming histories. Due to combined deep drawing and upsetting processes, the material flow on the cup walls is three-dimensional and non-proportional. In this study, the numerical and experimental investigations for those parts are presented and compared. Damage evolution in the process chains is simulated with a Lemaitre damage criterion. Microstructural analysis by scanning electron microscopy is performed in the regions with high mechanical loading. It is observed that the evolution of voids in terms of void volume fraction is strongly dependent on the deformation path. The comparison of simulation results with microstructural data shows that the void volume fraction decreases in the upsetting stage after an initial increase in the drawing stage. Moreover, the concurrent numerical and microstructural analysis provides evidence that the void volume fraction decreases during compression in sheet-bulk metal forming.     

The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.     

Heterologous Expression and Partial Characterization of a Putative Opine Dehydrogenase from a Metagenomic Sequence of Desulfohalobium retbaense

The aim of this research was to prove the function of the putative opine dehydrogenase from Desulfohalobium retbaense and to characterize the enzyme in terms of functional and kinetic parameters. A putative opine dehydrogenase was identified from a metagenomic library by a sequence-based technique search of the metagenomic library, and afterward was successfully heterologously produced in Escherichia coli. In order to examine its potential for applications in the synthesis of secondary amines, first the substrate specificity of the enzyme towards different amino donors and amino acceptors was determined. The highest affinity was observed towards small amino acids, preferentially L-alanine, and when it comes to α-keto acids, pyruvate proved to be a preferential amino acceptor. The highest activity was observed at pH 6.5 in the absence of salts. The enzyme showed remarkable stability in a wide range of experimental conditions, such as broad pH stability (from 6.0–11.0 after 30 min incubation in buffers at a certain pH), stability in the presence of NaCl up to 3.0 M for 24 h, it retained 80 % of the initial activity after 1 h incubation at 45 °C, and 65 % of the initial activity after 24 h incubation in 30 % dimethyl sulfoxide.     

A 3D oxalate-bridged [CuIIFeII] coordination polymer as molecular precursor for CuFe2O4 spinel—photocatalytic features

A 3D heterometallic oxalate-bridged coordination polymer [Cu^IIFe^II₂(H₂O)(terpy)(C₂O₄)₃]_n (terpy = 2,2′:6′,2″-terpyridine) ( 1 ) was investigated both as photocatalyst for the organic dye removal and as a single-source precursor for the preparation of the copper ferrite (CuFe₂O₄) nanocrystals by thermal processing. The dual functionality of 1 was supported by the degradation of aqueous solutions of rhodamine B (RhB) and methylene blue (MB) solutions under visible (Vis) and ultraviolet (UV) light irradiation, powder X-ray diffraction data collection at room temperature, and the optical and scanning electron microscopy analyses. A close inspection of the X-ray diffraction patterns unveiled qualitative and quantitative information on the phase composition obtained after the single-source molecular precursor route to spinel oxide. By optimizing the temperature levels and setting the controlled heating rate at 6 h of holding time, the phase composition of thermal processing of 1 was evaluated—thermal treatment of 1 at 950°C for 6 h and a heating/cooling rate of 10°C min⁻¹ resulted in the formation of solely tetragonal spinel phase of CuFe₂O₄, whereas the formation of both tetragonal and cubic CuFe₂O₄ phases was observed at 950°C by the heating rate of 30°C min⁻¹. To obtain the high-temperature cubic CuFe₂O₄ oxide, compound 1 was heated and then quenched at 925°C, which led to the formation of the cubic spinel ferrite as the main crystalline oxide phase. Moreover, the photocatalytic properties of the t-CuFe₂O₄ spinel were investigated under the same conditions as for 1 . The optical bandgap energies were estimated from UV–Vis absorption spectra for both metal oxide and precursor powder.     

Water‐soluble/dispersible carbazole‐containing random and block copolymers by nitroxide‐mediated radical polymerisation

A series of carbazole‐containing water‐dispersible poly(acrylic acid)‐b‐(9‐(4‐vinylbenzyl)‐9H‐carbazole) block copolymers (poly(AA)‐b‐poly(VBK)) and water‐soluble poly(methacrylic acid‐ran‐(9‐(4‐vinylbenzyl)‐9H‐carbazole)) (poly(MAA‐ran‐VBK)) random copolymers were synthesised in a controlled manner (i.e. low polydispersities $(\overline {M_{{\rm w}} } /\overline {M_{n} } < 1.3)$ by nitroxide‐mediated polymerisation (NMP) using an SG1‐based alkoxyamine initiator, BlocBuilder. Poly(AA)‐b‐poly(VBK) block copolymers were most easily accessed by using poly(AA) in its protected form as the macroinitiator for the 9‐(4‐vinylbenzyl)‐9H‐carbazole (VBK) block. Controlled polymerisation of MAA was accomplished using an excess of 10 mol.% SG1 relative to BlocBuilder with VBK as controlling co‐monomer (initial molar feed content f_VBK,0 = 0.03–0.20) in dimethylformamide at 80°C. Poly(MAA‐ran‐VBK) copolymers with a final VBK molar composition of F_VBK < 0.30 resulted in water‐soluble copolymers. In addition, as macroinitiators, poly(MAA‐ran‐VBK)s were sufficiently pseudo‐living to reinitiate a second batch of monomer (90 mol.% methyl methacrylate with styrene) in organic solvent and by ab initio, surfactant‐free emulsion polymerisation. In both cases, low polydispersity, amphiphilic block copolymers resulted $(\overline {M_{{\rm w}} } /\overline {M_{{\rm n}} } < 1.3)$ . © 2012 Canadian Society for Chemical Engineering     

Internal configurations for a multi-product dividing wall column

This paper addresses possibilities and peculiarities associated with establishing the most beneficial internal configuration of a complex dividing wall column (DWC), using as a base case the separation of a multicomponent aromatics mixture into four or five product streams. As expected, the V_min-diagram method proved to be an appropriate tool in such a study, as a means for identifying and assessing promising configurations and at the same time to provide the necessary inputs and reliable initial guesses for detailed simulation-based determination of energy and stage requirements. A new, energy efficient two-top product configuration is introduced that appears to be an interesting option for a four-product DWC.     

Solvothermal Conversion of Nanofiber to Nanorod‐Like Mesoporous γ‐Al2O3 Powders,and Study Their Adsorption Efficiency for Congo Red

Mesoporous γ‐Al₂O₃ powders with nanofiber and nanorod‐like structures were synthesized using boehmite sols in the presence of triblock copolymer, P123 in ethanol by solvothermal process at different temparatures (100°C–165°C) followed by calcination at 400°C–1000°C. The powders were characterized by low‐ and wide‐angle X‐ray diffraction (XRD), N₂ adsorption–desorption, and transmission electron microscopy (TEM). The adsorption efficiency of the powders with Congo red (CR) was studied by UV–vis spectroscopy. The γ‐Al₂O₃ phase became stable up to 1000°C. The nanorods obtained at 165°C had narrower pore size distribution (PSD) than nanofibers synthesized at 100°C, the former showed higher CR adsorption efficiency. The stepwise growth mechanism of nanofibers to nanorods conversion with increase in solvothermal temperatures was illustrated.