Preliminary study of the anticancer applications of mesoporous materials functionalized with the natural product betulinic acid

Dehydrated MCM-41 (S1) was functionalized under nitrogen with 3-chloropropyltriethoxysilane (CPTS) and 3-aminopropyltriethoxysilane (APTS) by grafting in toluene at 80 °C over 48 h to give the corresponding materials S2 and S3, respectively. Subsequently, S2 and S3 were suspended in methanol and reacted in a nitrogen atmosphere with betulinic acid (BA) for 48 h at 65 °C (in the presence of the triethylamine of S2) to give the BA-functionalized materials S4 and S5. All materials studied were characterized by powder X-ray diffraction, X-ray fluorescence, nitrogen gas sorption, multinuclear MAS NMR spectroscopy, thermogravimetry, UV spectroscopy, IR, SEM, and TEM. To study the release of BA, S4 and S5 were suspended in solutions simulating various body pH conditions (pH 7.4, 5.5, and 3.0). Results of the quantification of BA release by HPLC for S4 show a pH-dependent and very slow BA release following a logarithmic tendency, while S5 behaves differently, also pH-dependent but, in this case, fast release of BA which requires only days for total release of the therapeutic compound. In addition, the cytotoxic activity of all synthesized materials against various cancer cell lines was studied. The results show the absence of an antiproliferative effect on the surfaces without BA S1-S3, while an antiproliferative effect was observed with S4 and S5 and was attributed to the release of BA in the medium.     

Lipid peroxidative damage on Cisplatin exposure and alterations in antioxidant defense system in rat kidneys: a possible protective effect of selenium

Cisplatin (Cis-diamminedichloroplatinum II, CP) is an important chemotherapeutic agent, useful in the treatment of several cancers, but with several side effects such as nephrotoxicity. The present study investigated the possible protective effect of selenium (Se) against CP-induced oxidative stress in the rat kidneys. Male Wistar albino rats were injected with a single dose of cisplatin (7 mg CP/kg b.m., i.p.) and selenium (6 mg Se/kg b.m, as Na(2)SeO(3), i.p.), alone or in combination. The obtained results showed that CP increased lipid peroxidation (LPO) and decreased reduced glutathione (GSH) concentrations, suggesting the CP-induced oxidative stress, while Se treatment reversed this change to control values. Acute intoxication of rats with CP was followed by statistically significant decreased activity of antioxidant defense enzymes: superoxide dismutase (SOD), catalase (CAT), glutathione peroxidase (GSH-Px), glutathione reductase (GR) and glutathione-S-transferase (GST). Treatment with Se reversed CP-induced alterations of antioxidant defense enzyme activities and significantly prevented the CP-induced kidney damage.     

Antiproliferative and Proapoptotic Activities of Methanolic Extracts from Ligustrum vulgare L. as an Individual Treatment and in Combination with Palladium Complex

The aim of this study is to examine the growth inhibitory effects of methanolic leaf and fruit extracts of L. vulgare on HCT-116 cells over different time periods and their synergistic effect with a Pd(apox) complex. The antiproliferative activity of plant extracts alone or in combination with the Pd(apox) complex was determined using MTT cell viability assay, where the IC(50) value was used as a parameter of cytotoxicity. Results show that antiproliferative effects of L. vulgare extracts increase with extension of exposure time, with decreasing IC(50) values, except for 72 h where the IC(50) values for methanolic leaf extract were lower than for the fruit extract. The Pd(apox) complex alone had a weak antiproliferative effect, but combination with L. vulgare extracts caused stronger effects with lower IC(50) values than with L. vulgare extracts alone. The type of cell death was explored by fluorescence microscopy using the acridin orange/ethidium bromide method. Treatments with plant extracts caused typical apoptotic morphological changes in HCT-116 cells and co-treatments with Pd(apox) complex caused higher levels of apoptotic cells than treatment with plant extracts alone. The results indicate that L. vulgare is a considerable source of natural bioactive substances with antiproliferative activity on HCT-116 cells and which have a substantial synergistic effect with the Pd(apox) complex.     

The A9 Core Sequence from NRPS Adenylation Domain Is Relevant for Thioester Formation

The adenylation (A) domain in nonribosomal peptide synthetases catalyses a two-step reaction in which an amino acid is activated and then transferred to the neighbouring thiolation (T) domain. In this study, we investigated the role of the conserved A9 core sequence of the A-domain of tyrocidine synthetase 1, by analysis of single amino acid mutations in the A9 region. Mutation of an absolutely conserved proline (P490G) significantly reduced the conformational stability of the protein, as evidenced by increased susceptibility to proteolytic cleavage and denaturation. All mutant A-domains were capable of amino acid activation, but the activity in the overall reaction was reduced. Surprisingly, the S491R mutant (mutation at the first residue following the A9 motif) showed elevated overall activity compared to the wild-type protein. Our results suggest that the A9 core sequence plays a role in the second reaction step, in which it could serve as a "clip" for the proper positioning of residues important for the interaction with the T-domain, and/or stabilisation of the thioester-forming conformation.     

The comparative study of biocomposites based on hydrochar and chitosan-modified urea-formaldehyde resins

To provide new insight into the field of urea-formaldehyde (UF) adhesives science, in this work, for the first time, UF resin was modified with hydrochar of spent mushroom substrate (HCUF) and chitosan (CHUF) to investigate the effect of these bio-fillers on the hydrolytic and thermal stability of in situ prepared UF resins. The characterization of the modified UF biocomposites was performed using X-ray diffraction analysis (XRD), Fourier transforms infrared spectroscopy (FTIR), non-isothermal thermogravimetric analysis (TG), differential thermal gravimetry (DTG), and differential thermal analysis (DTA). Scanning electron micrographs (SEM) of the CHUF and HCUF biocomposites show a spherical structure that differs from each other because the surface of the CHUF biocomposite has pronounced pores that form a network structure. With its hydroxyl and amino groups, chitosan bonding to UF resin through hydrogen bonds, which is confirmed by FTIR analysis. The content of free FA in CHUF biocomposite is 0.06%, while that of HCUF is higher and amounts to 0.48%. The content of released FA in both modified UF biocomposites was similar (2.5% and 2.8% for CHUF and HCUF, respectively). The hydrolytic stability of CHUF is slightly higher compared to the HCUF biocomposite. Thermal analysis shows that the CHUF is thermally more stable because it starts to decompose at a slightly higher temperature than the HCUF biocomposite.     

Heterologous Expression and Partial Characterization of a Putative Opine Dehydrogenase from a Metagenomic Sequence of Desulfohalobium retbaense

The aim of this research was to prove the function of the putative opine dehydrogenase from Desulfohalobium retbaense and to characterize the enzyme in terms of functional and kinetic parameters. A putative opine dehydrogenase was identified from a metagenomic library by a sequence-based technique search of the metagenomic library, and afterward was successfully heterologously produced in Escherichia coli. In order to examine its potential for applications in the synthesis of secondary amines, first the substrate specificity of the enzyme towards different amino donors and amino acceptors was determined. The highest affinity was observed towards small amino acids, preferentially L-alanine, and when it comes to α-keto acids, pyruvate proved to be a preferential amino acceptor. The highest activity was observed at pH 6.5 in the absence of salts. The enzyme showed remarkable stability in a wide range of experimental conditions, such as broad pH stability (from 6.0–11.0 after 30 min incubation in buffers at a certain pH), stability in the presence of NaCl up to 3.0 M for 24 h, it retained 80 % of the initial activity after 1 h incubation at 45 °C, and 65 % of the initial activity after 24 h incubation in 30 % dimethyl sulfoxide.     

A 3D oxalate-bridged [CuIIFeII] coordination polymer as molecular precursor for CuFe2O4 spinel—photocatalytic features

A 3D heterometallic oxalate-bridged coordination polymer [Cu^IIFe^II₂(H₂O)(terpy)(C₂O₄)₃]_n (terpy = 2,2′:6′,2″-terpyridine) ( 1 ) was investigated both as photocatalyst for the organic dye removal and as a single-source precursor for the preparation of the copper ferrite (CuFe₂O₄) nanocrystals by thermal processing. The dual functionality of 1 was supported by the degradation of aqueous solutions of rhodamine B (RhB) and methylene blue (MB) solutions under visible (Vis) and ultraviolet (UV) light irradiation, powder X-ray diffraction data collection at room temperature, and the optical and scanning electron microscopy analyses. A close inspection of the X-ray diffraction patterns unveiled qualitative and quantitative information on the phase composition obtained after the single-source molecular precursor route to spinel oxide. By optimizing the temperature levels and setting the controlled heating rate at 6 h of holding time, the phase composition of thermal processing of 1 was evaluated—thermal treatment of 1 at 950°C for 6 h and a heating/cooling rate of 10°C min⁻¹ resulted in the formation of solely tetragonal spinel phase of CuFe₂O₄, whereas the formation of both tetragonal and cubic CuFe₂O₄ phases was observed at 950°C by the heating rate of 30°C min⁻¹. To obtain the high-temperature cubic CuFe₂O₄ oxide, compound 1 was heated and then quenched at 925°C, which led to the formation of the cubic spinel ferrite as the main crystalline oxide phase. Moreover, the photocatalytic properties of the t-CuFe₂O₄ spinel were investigated under the same conditions as for 1 . The optical bandgap energies were estimated from UV–Vis absorption spectra for both metal oxide and precursor powder.     

Electrochemical study of the chromium electrode behaviour in borate buffer solution

The electrochemical behaviour of the chromium electrode in borate buffer solution (pH 9.3) was studied by cyclic voltammetry and electrochemical impedance spectroscopy. Chromium passivity was observed over a broad potential region, from –1.0 to 0.5 V vs SCE. The passivation process took place in two steps: formation of a chromium oxide monolayer and transition of chromium to a higher valence state. The anodic film exhibited the properties of a p-type semiconductor. Transpassive dissolution of chromium occurred at 0.5 V vs SCE, with two reaction intermediates present, Cr_Cr ^III and Cr_ad ⁴⁺.     

Application of substituted N-arylpyrroles in the corrosion protection of aluminium in hydrochloric acid

The inhibiting action of N-arylpyrroles on aluminium in 0.17 mol dm^–3 hydrochloric acid solution, in the temperature range 20–60 °C, was studied using potentiodynamic and electrochemical impedence spectroscopy techniques. The inhibiting efficiency of both investigated compounds 1-(2-fluorophenyl)-2,5-dimethylpyrrole (compound A) and 1-(2-fluorophenyl)-2,5-dimethylpyrrole-3-carbaldehyde (compound B) slightly increases with increasing temperature of the corrosive solution. Inhibitor adsorption on the elecrode surface decreases the apparent activation energy of the hydrogen evolution reaction. Compound A follows the Temkin adsorption isotherm, while its carbaldehyde derivative follows the Langmuir isotherm. The results of the apparent energy of activation and the standard free energy of adsorption point to stronger chemisorption of the compound A. However, due to additional condensation of molecules with carbaldehyde groups on the electrode surface, the carbaldehyde derivative exhibits even better inhibiting efficiency than compound A. The kinetic corrosion parameters, analysed in terms of the impedance data, show a satisfactory agreement with those obtained by the potentiodynamic method.     

Effects of aging on polyimide: A study of bulk and interface chemistry

We are investigating the bulk and interfacial chemistry of polyimide (PI) exposed to heat and relative humidity (RH) stress (85°C/85% RH) over long periods to understand the long-term reliability aspects of PI for microelectronic applications. The PI surface chemistry and the PI–Si interface chemistry was followed with electron spectroscopy for chemical analysis (ESCA). For exposure times greater than 550 h, the PI surface exhibits significant changes in emission structure and atomic concentration. The PI–Si interface indicates little change in the PI chemistry when compared to control samples. The water-contact angle at the PI surface shows no statistically significant change as a function of exposure time. Bulk and surface chemistry were followed with Fourier transform infrared spectroscopy (FTIR) in a grazing incidence reflection configuration. There were measurable differences in FTIR spectra between aged and control samples only for the case of very thin PI layers. These results suggest that for exposure times of less than 1100 h, chemical changes in PI occur primarily at the PI–air interface for samples 1 μm thick and greater. These changes represent a possible rearrangement of the imide structure and may be a form of deimidization of the polymer, but the final state is not polyamic acid. The PI surface chemistry changes observed with ESCA are reversible upon reheating to the cure temperature.