Algorithm for tissue ischemia estimation based on electrical impedance spectroscopy

The purpose of this paper is to present an algorithm developed for real-time estimation of skeletal muscle ischemia, based on parameters extracted from in vivo obtained electrical impedance spectra. A custom impedance spectrometer was used to acquire data sets: complex impedance spectra measured at 27 frequencies in the range of 100 Hz-1 MHz, and tissue pH. Twenty-nine in vivo animal studies on rabbit anterior tibialis muscle were performed to gather data on the behavior of tissue impedance during ischemia. An artificial neural network (ANN) was used to quantitatively describe the relationship between the parameters of complex tissue impedance spectra and tissue ischemia via pH. The ANN was trained on 1249, and tested on 946 ischemic tissue impedance data sets. A correlation of 94.5% and a standard deviation of 0.15 pH units was achieved between the ANN estimated pH and measured tissue pH values.     

An Example of Human-Centric Sensor Network: Be Responsible Platform

The paper addresses the Be Responsible platform, a representative example of human-centric sensing network which, relying on the Info-Communication and Internet of Things concepts, aims to improve the communication between citizens, on one side, and government authorities, on the other side, with the purpose of resolving various problems encountered in a modern society. A widespread network of human-centric smartphone devices and PCs has been used as a valuable source of data collected and processed in order to trigger adequate actions upon problem resolving. In this way, humans acting as sensor operators and data sources become a powerful factor in improving their society. The Be Responsible platform enables the people to report the irregularities in various aspects of their social life (grey economy, misuse of government vehicles, ecology, traffic), and hence to take active part in resolving them. It also promotes positive and responsible social and institutional behavior, which has to be nurtured in any society seeking progress. The number of submitted reports as well as the money collected from the fine revenues and subsequently invested in projects of social good, undoubtedly prove that what could not be achieved through years of traditional government-led policy approach, was achieved in months of citizen engagement.     

E-business technologies for xRM: Exploring the readiness of public broadcasters

This paper examines the possibilities of enhancing relationship management between public service broadcasters and their stakeholders by harnessing the potential of newest e-business technologies and concepts, such as: social media, digital and interactive TV, and mobile computing. In order to facilitate adoption of relationship management strategy, a framework for leveraging relationship management is proposed. Evaluation was performed within the e-business system of a public broadcaster. This empirical study explored the readiness and expected benefits of relationship management implementation. The research results have indicated that a public broadcaster could achieve a higher level of social responsibility, improve business sustainability, and empower communication and collaboration with all the stakeholders by using emerging technologies for relationship management activities.     

Trapping and recombination processes via deep level T3 in semi-insulating gallium arsenide

Trapping and recombination of free carriers by deep level T₃ has been studied. Occupancy of the level by electrons and dynamics of its filling and emptying as a function of illumination with monoenergetic photons in 0.69–1.55 eV range has been monitored by the thermally stimulated currents method. We have found that level T₃ behaves more like a recombination center than like an ordinary electron trap. Besides trapping free electrons from conduction band, this trap can also communicate with valence band, trapping holes. The capture cross section for trapping a hole is estimated to be comparable or even larger than the capture cross section for trapping an electron. However, in many experimental conditions free electrons are generated more abundantly than free holes, and free carrier mobility and thermal velocity are both much higher for electrons than for holes. Therefore, electron trapping often prevails, so that this frequently detected defect, has been up to now most often perceived as a deep electron trap.     

Estimation and setting starting values in ARMA algorithms

For the given observations set of the ARMA (autoregressive moving average) process, the likelihood function depends, not only on model parameters, but on the starting values of the input and output. Therefore, it is called theconditional likelihood function. Theunconditional likelihood function can be obtained in two ways. The first is to set the starting values to zero, as is often done, and the second is to set them to the properly estimated values. The difference between these two types of likelihood functions is significant when the given data sequence is short, and any of the zeros of the moving average part is close to the boundary of the unit circle.In this paper the direct method of starting value estimation and its application to two off-line ARMA estimation algorithms, the maximum likelihood (ML) algorithm and the iterative inverse filtering (ITIF) algorithm, is proposed. Experimental results prove both increased efficiency and stability of these algorithms.The importance of setting the starting values properly is also significant when the recursive algorithm, with previously estimated parameters, has to be restarted. The advantage of the proposed reinitialization method is shown on the recursive lattice algorithm working in the block mode.     

Modeling of dibenzothiophene oxidative desulfurization using response surface methodology

The effect of reaction temperature, mixing speed and oxidant to catalyst volume ratio, including their interactions on the oxidative desulfurization of dibenzothiophene by using response surface methodology was studied. Hydrogen peroxide was used as oxidant and acetic acid as catalyst. The obtained model accurately predicts conversion of dibenzothiophene and the best conversion of 98.7% was observed at temperature 70°C, mixing speed of 1250 rpm and oxidant to catalyst volume ratio of 1:1. At high temperatures, a major limitation of the desulfurization process is the mass transfer and the high mixing speed is needed to achieve an efficient process.     

High Definition Digital Fabrication of Active Organic Devices by Molecular Jet Printing

We introduce a high resolution molecular jet (MoJet) printing technique for vacuum deposition of evaporated thin films and apply it to fabrication of 30 μm pixelated (800 ppi) molecular organic light emitting devices (OLEDs) based on aluminum tris(8‐hydroxyquinoline) (Alq₃) and fabrication of narrow channel (15 μm) organic field effect transistors (OFETs) with pentacene channel and silver contacts. Patterned printing of both organic and metal films is demonstrated, with the operating properties of MoJet‐printed OLEDs and OFETs shown to be comparable to the performance of devices fabricated by conventional evaporative deposition through a metal stencil. We show that the MoJet printing technique is reconfigurable for digital fabrication of arbitrary patterns with multiple material sets and high print accuracy (of better than 5 μm), and scalable to fabrication on large area substrates. Analogous to the concept of “drop‐on‐demand” in Inkjet printing technology, MoJet printing is a “flux‐on‐demand” process and we show it capable of fabricating multi‐layer stacked film structures, as needed for engineered organic devices.     

Study of the electrical cycling stressed large area Schottky diodes using I–V and noise measurements

Large area commercial Al/n-Si Schottky diodes were subjected to an electrical cycling stress in order to cause degradation of diodes with local contact irregularities. Using the I–V characteristics and noise measurements in the frequency range of 10 Hz to 10 kHz at room temperature and using the corresponding equivalent circuit representation of degraded diodes, it has been shown that the latent leakage paths contribute to the degradation of the Schottky diodes under the test conditions. The results could be used to confirm that the ideality factor cannot be alone used as prediction tool of diode behavior under electrical cycling stress. The conclusion of this paper is that the results show that this kind of the stress test can be used as a screening test for diodes with latent leakage current paths.