Polyethylene/Polycaprolactone Nanocomposite Films for Food Packaging Modified with Magnetite and Casein: Oxygen Barrier,Mechanical, and Thermal Properties

Polyethylene (PE) was modified and prepared as double-layer polyethylene/polycaprolactone (PE/PCL) film. Magnetite and casein were added to the PCL-coating film to improve barrier properties and prevent destruction of basic structure of primary polymer PE. Significant improvements were observed with regards to mechanical (tensile strength, elongation at break) and thermal properties, while barrier (O₂ permeability) properties were slightly improved. Overall migration values into acetic acid were lower (from 1 to 4.6 mg/dm²) than the upper limit set by the legislation. Specific migration of iron in PE/PCL-Fe samples is also below (µg/L) specific migration limit value set by the legislation (mg/kg).     

Application of GC–MSD and LC–MS/MS for the determination of priority pesticides in baby foods in Serbian market

Babies and small children are especially sensitive population to the exposure to environmental contaminants. Their small mass and developing systems, including brain development may show adverse health effects from even low levels of contamination on a chronic or single dose case. In this paper one extraction method and two chromatographic techniques for the determination of pesticide residues in baby food were evaluated. A liquid chromatography–tandem mass spectrometry technique combined with electrospray ionization (ESI), (LC–MS/MS) and gas chromatography–mass spectrometry detection (GC–MSD) technique were applied in the detection of 50 pesticides in baby food. So-called QuEChERS (quick, easy, cheap, effective, rugged and safe) method was used as a sample preparation procedure. The recoveries were investigated at three levels (5, 10 and 50 μg/kg) and the results obtained showed compliance with the contemporary EU requirements with a few exceptions. LOQs for most of the tested pesticides were below the EU MRLs (10 μg/kg), except deltamethrin, cypermethrin, fenvalerate, phosalone and beta-cyfluthrin (LOQs were 10 μg/kg). Both techniques were applied in the analysis of 50 samples of baby food manufactured in Serbia.     

Data clustering based on quantum synchronization

Natural Computing - There exists a specific class of methods for data clustering problem inspired by synchronization of coupled oscillators. This approach requires an extension of the classical...     

Concerted utility review of VVER-440 safety research needs (VERSAFE)

There are twelve operating VVER-440/213 reactors in the Czech Republic, Hungary and Slovakia. The plant owners have carried out extensive safety enhancement programmes, which have included measures to improve prevention, mitigation and control of design basis accidents. Recently, there have been a number of projects to study the Severe Accident Management aspects of these plants. The plant owners have also initiated Plant Life Management programmes. The objective of the VERSAFE Concerted Action is to create a network of the VVER-440/213 plant owners and operators, which aims at definition of the further research needs of severe accidents and plant ageing from the utilities’ viewpoint. The starting point is to formulate a general approach to severe accident management and plant life management and then proceed to define the needs for the additional information expected from the safety research. The role of national research institutes and organisations of the partner countries is of crucial importance in performing such research and, thus, creating and maintaining the expertise on the national level. The successful completion of the project will assist in establishing well-defined research projects that are oriented to the needs of the end-users and provide information that can be used to facilitate and support the negotiations of the EU applicant countries operating VVER-440 reactors.     

A shift of the perceptual attributes of color due to the manifestation of the simultaneous contrast effect on a display

This research shows the effect of simultaneous contrast on a design solution that generates it, and it also shows how its manifestation affects the shift of perception attributes of the observer's color. In the conducted research, 55 subjects had to harmonize the primary stimuli from the reproduction obtained with the help of digital printing technology, with the primary stimuli presented on two computer screens. As a visual harmonization technique, simultaneous binocular harmonization was used. The primary stimuli were made achromatic, with a 50% Raster Tone value (RTV), and are surrounded by achromatic secondary stimuli whose values increase in steps from 10% RTV up to 100% RTV. A shift in the perceptual attributes of color has been shown with the help of the CIEDE2000 system. Using ANOVA with repeated-measures and Fisher's post hoc analysis, statistically significant differences were found between the perceived means of shift in the ΔC₀₀ chroma and ΔL₀₀ lightness on defined samples on both computer screens, while in the case of the ΔH₀₀ hue, no statistically significant differences were observed. The research also determined colorimetric differences in the ΔE₀₀ color difference. Moreover, the student's t test was used to determine that the effect is stronger when manifested on the Lenovo computer than on the Asus computer screen (P < .05).     

Determination of the percentage of wood failure by 3D scanning of the adhesive bondline

The quality of the wood-adhesive bond is usually determined by its shear strength and the percentage of wood failure, the latter usually being determined by visual evaluation and prone to the examiner’s subjective evaluation. A new technique of 3D scanning was used to evaluate the percentage of wood failure, and the results obtained were compared to those obtained by means of existing methods, i.e. the visual evaluation and image analysis techniques. Evaluation by 3D scanning showed comparable values for samples with a high percentage of wood failure, but large differences in the case of samples showing mainly adhesive failure.     

Contribution to controlling non-redundant manipulatorsContribution au controle des manipulateurs non surabondants

The paper considers the possibilities of synthesizing the manipulator whose tip moves along the predetermined path and in optimal way, from the standpoint of energy dissipated by an actuator. The analysis has been carried out on the complete dynamic model of an anthoromorphic manipulator with three degrees of freedom and the third order model of actuators. Digital simulation has been performed for two types of control, optimal control for the subsystem of each actuator (suboptimal from the overall system standpoint) and the motion with predetermined change of angular velocities of internal coordinates. Both types of control have been also applied to the manipulator whose gripper (tip) had to be moved with required velocity.