Anisotropic geodesics for live‐wire mesh segmentation

We present an interactive method for mesh segmentation that is inspired by the classical live‐wire interaction for image segmentation. The core contribution of the work is the definition and computation of wires on surfaces that are likely to lie at segment boundaries. We define wires as geodesics in a new tensor‐based anisotropic metric, which improves upon previous metrics in stability and feature‐awareness. We further introduce a simple but effective mesh embedding approach that allows geodesic paths in an anisotropic path to be computed efficiently using existing algorithms designed for Euclidean geodesics. Our tool is particularly suited for delineating segmentation boundaries that are aligned with features or curvature directions, and we demonstrate its use in creating artist‐guided segmentations.     

Seeded Crystallization of Leucite

The leucite crystallization kinetics from a hydrothermally derived precursor seeded with nano-crystalline leucite was investigated by X-ray diffraction and non-isothermal differential thermal analysis. The nano-crystalline leucite was prepared by high-energy milling of high-purity leucite powder and the leucite precursor was prepared by the hydrothermal method of silica sol, aluminum nitrate, and potassium nitrate. After the seeds were introduced, the crystallization temperature of the precursor was lowered by 100°C and the transition phase kalsilite did not appear during the crystallization process. When the seeded precursor was heat treated at 700°C, a small amount of cubic leucite was stabilized to room temperature. The seeded precursor showed an exothermic peak between 800° and 920°C under different heating rates. The activation energy for the growth of leucite from the seeded precursor was 256(SD9) kJ/mol.     

Dynamic deviation reduction‐based concurrent dual‐band digital predistortion

This article introduces the concurrent dual‐band digital predistortion (DPD) architecture with only one upconvertion unit, which is suitable for the linearization of wideband power amplifiers (PAs) excited by concurrent dual‐band signals. By extending the conventional dynamic deviation reduction (DDR) model to the concurrent dual‐band mode, we propose two DDR‐based concurrent dual‐band models, the dual‐band DDR (DB‐DDR) model and the simplified dual‐band DDR (SDB‐DDR) model. The performance of these two models is experimentally assessed with two types of wideband PAs (a GaN Class F PA and a GaN Doherty PA) driven by the concurrent dual‐band signal, and compared with the prior two‐dimensional digital predistortion (2D‐DPD) model and the two‐dimensional modified memory polynomial (2D‐MMP) model. The results prove the good DPD performance and low computational complexity of the proposed models. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:401–411, 2014.     

管材超声波分层缺陷检测中盲区的构成探析

管材超声波分层检测作为控制产品质量的关键步骤,必须引起相关从业人员的重视,特别是要重点分析分层缺陷检测中盲区的构成原因和分布特征。只有这样,才能切实保证检测结果的准确性,更好地控制管材质量。通过对超声波分层缺陷检测的重要性进行阐释,分析了其中盲区的构成和分布等问题。     

基于SkyEye的嵌入式Linux移植仿真技术研究

在嵌入式系统开发中,经常需要硬件开发板来调测软件,不仅操作繁琐,硬件环境不稳定时问题也很难定位;有时还会遇到软件等待硬件调试,延误开发周期的情况。在PC桌面系统下,探讨了一种基于SkyEye虚拟硬件技术的嵌入式平台仿真技术,介绍如何建立仿真基础环境,编译嵌入式Linux内核,制作根文件系统,编译、配置SkyEye,以S3C6410X为目标机处理器,将Linux内核及文件系统移植到基于SkyEye虚拟的ARM体系架构下,为嵌入式系统的研发探索了一种新的途径。     

黄荆提取物对几种害虫的杀虫活性

研究了黄荆种子二氯甲烷提取物对5种害虫的杀虫活性以及对天敌异色瓢虫的安全性。结果表明：黄荆提取物对菜青虫、小菜蛾、麦长管蚜和桃蚜都有较高的杀虫活性，尤其是对菜青虫的活性最高，稀释100倍，处理4龄幼虫死亡率可达93．3％。但对大猿叶甲的杀虫活性则很低。黄荆提取物对异色瓢虫幼虫有一定的杀虫活性，但对其成虫无任何影响。本研究结果为开发利用这一新的杀虫植物资源提供了依据。     

基于NSST和RI-LPQ的纹理图像检索

针对采用单一方法提取图像特征时检索率不高的问题,结合非下采样剪切波变换(NSST)统计特征和旋转不变的局部相位量化(RI-LPQ)原理,提出一种纹理图像检索方法。非下采样剪切波不仅具有方向选择性及平移不变性,而且可以对图像进行有效的稀疏表示,与传统小波相比,可有效捕捉图像的边缘轮廓等纹理信息,与非下采样轮廓波相比,具有更高的计算效率。利用广义高斯分布函数对图像NSST高频子带系数的统计特征进行分析,RI-LPQ描述算子直接提取图像特征,采用具有权重系数的相似性测度公式对Brodatz图像库进行纹理图像检索。实验结果表明,与传统小波和轮廓波的方法相比,NSST统计特征方法的平均检索率分别提高4.77%和1.44%,纹理图像检索方法的平均检索率分别提高7.36%和1.98%。     

激光引信抗干扰技术分析

针对激光引信易受云雾、烟尘干扰的特点,利用云雾、烟尘及模拟阳光产生装置,设计了一组激光引信干扰实验。模拟激光引信与目标交会过程中云雾、烟尘及阳光等对激光引信的干扰,并根据实验数据,分析了云雾、烟尘及阳光对激光引信的干扰机理和特征,提出了抗阳光、云雾等干扰的措施。     

基于光线投射法的目标三维重构技术

针对距离选通激光成像系统获得的图像源,为了减小断层图像间的距离远大于断层图像内像素间的距离这一因素对三维可视化的影响,增强三维显示效果,提高运算速度,在研究了光线投射三维重构算法的基础上,提出了距离分辨率远小于成像分辨率的插空帧光线投射法和通过旋转体数据实现从不同的视线角度进行观察的三维重构方法.仿真结果表明:提出的方法可行、有效,提高了目标的探测和识别概率.     

一种无线传感器网络环境下的查询路由与负载均衡机制

针对无线传感器网络节点数量多、通信距离短、能量有限的特点,提出一种查询增益路由算法以及基于路由的负载均衡机制。查询增益路由算法通过查询增益矩阵维护路由信息,并依据历史查询成功记录来选取路由节点;而基于路由的负载均衡机制可以在查询路由过程中记录节点的能量信息,转移负载,使得查询路径中各节点的能量消耗得到均衡。仿真实验结果表明,查询增益路由算法可以在降低节点能量消耗的前提下提高查询成功率,而基于路由的负载均衡机制可以进一步降低查询增益路由算法的能量消耗。