Low-Temperature Synthesis of NaNbO3 Nanopowders and their Thin Films from a Novel Carbon-Free Precursor

We have demonstrated a synthetic procedure for nano-sized NaNbO₃ powder and its thin films using a carbon-free precursor prepared by the reaction of H₂O₂ with sodium and niobium alkoxides. A combination of X-ray powder diffraction, Raman spectra, and thermal gravity and differential thermal analysis, carbon analysis, fourier transform infrared spectra, transmission electron microscopy, and atomic force microscopy was used to characterize the resulting materials and precursor compounds. Results show that this procedure demonstrates the major advantages of low-temperature synthesis (∼400°C) and low weight loss during transformation into NaNbO₃ because of its carbon-free nature, which also provides the option of preparing nano-sized particles and dense, crack-free NaNbO₃ thin films.     

Plausible guard effect on the active sites of heterogeneous Ziegler–Natta catalyst by coordinating monomers and growing polymer chains in the initial stage of propene polymerization

Investigation of propene polymerization by a modified stopped‐flow technique using TiCl₄/ethylbenzoate(EB)/MgCl₂ Ziegler–Natta catalyst with or without pretreating the catalyst with triethylaluminium (TEA) within an ultra‐short period (ca 1 s) was conducted to gain new understanding of the nature of active sites related to TEA in the early stage of polymerization. When the catalyst was pretreated by a cocatalyst, deactivation behaviour was clearly observed, even within an extremely short pretreatment period. In contrast, without pretreatment, the deactivation of active sites can be neglected within the polymerization period indicating that the activated Ti species might be protected from deactivation by TEA when monomer is present in the system. A plausible guard effect on the active sites by coordinating monomer and growing polymer chains in the initial stage of polymerization is proposed to account for this phenomenon. Copyright © 2004 Society of Chemical Industry     

Molecular dynamics of the generation process of double‐walled carbon nanotubes from peapods

The generation process of a double‐walled carbon nanotube (DWNT) from a “peapod” was studied by classical molecular dynamics simulation. Starting from a peapod structure, defined by five C₆₀ molecules inside a (10,10) single‐walled carbon nanotube (SWNT), polymerized fullerenes, a peanut‐like structure and an almost nanotube‐like structure were obtained under suitable conditions of temperature control. The mean distance between the two layers of the DWNT agreed with an experimental report that it is larger than the interlayer spacing found in multi‐walled carbon nanotubes (MWNTs). In addition, the chirality dependence of the potential energy of a DWNT on the relative chirality of its constituent tubes was examined using a 6‐12 Lennard‐Jones potential. It was found that the potential energy depends only on the distance between the two layers, not on the relative chiralities. © 2006 Wiley Periodicals, Inc. Heat Trans Asian Res, 35(4): 254–264, 2006; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/htj.20115     

Aspects of dSpace in contemporary design

Computer dependent design space is illustrated with the recent international competition project for Kowloon Arts Center. The spatial condition of design resulted from the deployment of Euclidian geometry and use of the nonrational, complex surfaces. Another aspect of computer dependent space was rooted in the contemporary work situation where architects located on the three different continents collaborated in distributed mode over the internet. The resulting project confirms the creative potential of the above aspects of the digital space in contemporary design.     

Muscle-specific calpain, p94, responsible for limb girdle muscular dystrophy type 2A, associates with connectin through IS2, a p94-specific sequence

p94, a muscle-specific member of calpain family, is unique in that it undergoes rapid and exhaustive autolysis with a half-life of less than 1 h resulting in its disappearance from muscle. Recently, p94 was shown to be responsible for limb girdle muscular dystrophy type 2A. To elucidate the muscular proteolytic system mediated by p94 and to solve the mystery of its unusually rapid autolysis, we searched for p94-binding proteins by the two-hybrid system. Although calpain small subunit plays a crucial role for regulation of ubiquitous calpains, it did not associate with p94. After a screening of skeletal muscle library, connectin (or titin), a gigantic filamentous protein spanning the M- to Z-lines of muscle sarcomere, was found to bind to p94 through a p94-specific region, IS2. The connectin-insoluble fraction of washed myofibrils contained full-length intact p94, suggesting that connectin regulates p94 activity.     

The reaction of polypropylene with maleic anhydride

An addition reaction of maleic anhydride with polypropylene takes place in the presence of radical reagents or sunlight. The initial rate of the reaction was proportional to the concentration of polypropylene and maleic anhydride, and one-half power of the concentration of the radical reagents. The increase in the temperature from 80 to 120°C increased the rate of the reaction and di-cumyl peroxide was effective as a radical reagent for this reaction. Ionic crosslinked rubber-like polymers were obtained from the reaction of maleic polypropylene with some alkali metal compounds. They showed the characteristic absorption band due to ? COO^? in their infrared spectra.     

Application of the double slip plane crack model to temperature and strain rate sensitive BCC metals

The double slip plane crack model proposed by Weertman, Lin and Thomson (1982) has been applied to model the effect of temperature and strain rate on the stress intensity factor at a crack tip in temperature and strain rate sensitive materials. Increase in temperature or decrease in strain rate (as well as a decrease in slip plane spacing) are shown to increase the shielding of the crack tip by dislocation distributions on the slip planes. Furthermore, the effect of temperature on the fracture toughness, K_llc, at various strain rates was shown to exhibit the same sigmoidal shaped curve seen for K_lc data in typical alloy steels.     

Surface structures of synthetic diamonds

Diamond crystals of about 2 mm in size were grown by the temperature gradient method using Ni, Ni-Fe alloy and Fe as solvent metals. Several characteristic patterns were seen on the surfaces of the grown diamonds and were found to correspond to the texture of the quenched solvent metals. A vague vein-like pattern appeared when Ni was used. The surface patterns became finer with the increase of the content of Fe in Ni-Fe alloy, and when 70 wt% Fe-30 wt% Ni alloy was used, very fine dendritic patterns were seen on all of the faces of diamond in accordance with the symmetries of the lattice. The patterns are formed by the precipitation of carbon atoms in the space of the dendrites of the solvent metals during the quenching process. Lamellar patterns and etch pits were seen when Fe was used. The patterns are formed when Fe dissolves the diamond surfaces to produce Fe₃C during the quenching process.