Effect of modified single‐wall carbon nanotubes on mechanical and morphological properties of thermoplastic elastomer nanocomposites based on (polyamide 6)/(acrylonitrile butadiene rubber)

Thermoplastic elastomer nanocomposites based on acrylonitrile butadiene rubber (NBR) and polyamide 6 (PA6), with acid functionalized single‐wall carbon nanotubes (SWNT), were prepared via a direct melt‐mixing process in an internal mixer. The influence of SWNT content (0, 0.5, 1, 1.5) on morphological properties of PA6/NBR with different ratios (80/20, 70/30, 60/40) were then investigated. Characterization of nanocomposites was conducted by using transmission electron microscopy, scanning electron microscopy, differential scanning calorimetry, and mechanical properties. Scanning electron microscopy micrographs proved the droplet‐matrix blend morphology in which the size of NBR droplets decreased as the SWNT loading increased, suggesting dispersion of SWNT in the PA6 phase. It was further proved by transmission electron microscopy images, showing homogenous dispersion of SWNT in the PA6 phase. Differential scanning calorimetry results showed a slightly reduced percentage of crystallinity in samples containing SWNT. The mechanical properties of nanocomposites indicated an enhancement in tensile strength, modulus, and hardness on increasing SWNT content. J. VINYL ADDIT. TECHNOL., 22:336–341, 2016. © 2014 Society of Plastics Engineers     

Dynamically vulcanized polypropylene/ethylene‐propylene diene monomer/organoclay nanocomposites: Effect of mixing sequence on structural,rheological, and mechanical properties

Dynamically vulcanized thermoplastic elastomer (TPE) nanocomposites based on polypropylene (PP), ethylene‐propylene diene monomer (EPDM) and cloisite 15A were prepared via direct melt mixing in a co‐rotating twin‐screw extruder. The mixing process was carried out with optimized processing parameters (barrel temperature = 180°C; screw speed = 150 rpm; and feeding rate = 0.2 kg/hr). The formulation used to prepare the nanocomposites was fixed to 75/20/5 (PP/EPDM/Cloisite^©15A), expressed in mass fraction. Effect of mixing sequence on the properties of vulcanized and unvulcanized (TPE) nanocomposites prepared under similar conditions was investigated using X‐ray diffraction (XRD) and a tensile testing machine. Results showed that the sequence of mixing does affect the properties of final TPE nanocomposites. Accordingly, nanocomposite samples prepared through mixing the preblended PP/clay masterbatch with EPDM phase, show better clay dispersion within the polymer matrix. J. VINYL ADDIT. TECHNOL., 22:320–325, 2016. © 2014 Society of Plastics Engineers     

Silicon Application Enhances the Photosynthetic Pigments and Phenolic/Flavonoid Content by Modulating the Phenylpropanoid Pathway in Common Buckwheat under Aluminium Stress

Silicon - Silicon (Si) is very effective in the amelioration of heavy metal (HM) stress in different crop plants. This investigation was conducted to assess the protective role of Si in modulating...     

Structural and magnetic properties of erbium doped nanocrystalline Li–Ni ferrites

A series of nanocrystalline Li_0.25Ni_0.5Fe_2.25−xEr_xO₄ (x=0.00, 0.02, 0.06, 0.08, and 0.10) ferrite powders, having a cubic spinel crystal structure and a low value of coercivity, was synthesized by the sol–gel auto-combustion route. The structure, morphology and magnetic properties of the prepared nanoferrites were characterized by powder X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and the magnetic property measurement system (MPMS). A well-defined single phase spinel structure is confirmed in all the samples by X-ray diffraction analysis. The lattice parameters of the samples increase slightly with increasing the erbium content. The crystallite size of the Er-doped samples is smaller than that of pure Li–Ni ferrite, and decrease regularly in the range of 36.0–14.5 nm. It has been observed that the magnetic properties of these ferrites are strongly influenced by the added erbium content. The magnetic measurements indicate that saturation magnetization (M_s) and coercivity (H_c) decrease gradually with the increase of Er content in the lattice.     

A real-time distributed algorithm for an aircraft longitudinal optimal autopilot

This paper is concerned with fast and efficient computations for the solution of the two-point boundary-value problem that arises in optimal control of an aircraft longitudinal mode. The solution proposed is implemented on a T800 transputer network using parallel C and is shown to be adequate for real-time control purposes.     

Influence of accelerated curing on the compressive strength of polymer-modified concrete

In recent building practice, rapid construction is one of the principal requisites. Furthermore, in designing concrete structures, compressive strength is the most significant of all parameters. While 3-d and 7-d compressive strength reflects the strengths at early phases, the ultimate strength is paramount. An effort has been made in this study to develop mathematical models for predicting compressive strength of concrete incorporating ethylene vinyl acetate (EVA) at the later phases. Kolmogorov-Smirnov (KS) goodness-of-fit test was used to examine distribution of the data. The compressive strength of EVA-modified concrete was studied by incorporating various concentrations of EVA as an admixture and by testing at ages of 28, 56, 90, 120, 210, and 365 d. An accelerated compressive strength at 3.5 hours was considered as a reference strength on the basis of which all the specified strengths were predicted by means of linear regression fit. Based on the results of KS goodness-of-fit test, it was concluded that KS test statistics value (D) in each case was lower than the critical value 0.521 for a significance level of 0.05, which demonstrated that the data was normally distributed. Based on the results of compressive strength test, it was concluded that the strength of EVA-modified specimens increased at all ages and the optimum dosage of EVA was achieved at 16% concentration. Furthermore, it was concluded that predicted compressive strength values lies within a 6% difference from the actual strength values for all the mixes, which indicates the practicability of the regression equations. This research work may help in understanding the role of EVA as a viable material in polymer-based cement composites.     

New dinuclear lanthanide(III) complexes based on 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione and 2,2′-bipyrimidine

Reaction of mononuclear Ln(fod)₃ chelates (where fod is the anion of 6,6,7,7,8,8,8-heptafluoro-2,2-dimethyl-3,5-octanedione and Ln = Nd, Eu, Tb and Lu) with potentially bridging ligand 2,2′-bipyrimidine (bpm) in 2:1 mole ratio in ethanol afforded new dinuclear lanthanide complexes of the form [Ln(fod)₃-(μ-bpm)-Ln(fod)₃]. Neodymium complex is one of the rare bipyrimidine-bridged dinuclear complexes. The absorption spectrum of the neodymium complex displays characteristic hypersensitive as well as non-hypersensitive transitions. The excitation of Eu–Eu and Tb–Tb complexes at 355 nm produces an intense red and green luminescence, respectively.     

Starch,Sucrose, and Rezol® IL800 as Density Modifiers for Polyurethane Rigid Foams Formulated by Recycled Polyol

Waste polyurethane rigid foam (PUF) is recycled by the glycolysis process. The recycled product is used in a polyol blend, applied in a new foam formulation. Polyurethane rigid foams formulated by recycled polyols are highly dense compared to rigid foams formulated by virgin polyols. As these foams are mostly used in insulation, they make an extra mass to the main product or system that is insulated. Therefore, it is important to decrease their density as much as possible.

Some density modifiers such as starch, sucrose, and REZOL^® IL800 were investigated to recognize their effect on PUF's density.