The usefulness of determining des-gamma-carboxy prothrombin by sensitive enzyme immunoassay in the early diagnosis of patients with hepatocellular carcinoma

BACKGROUND: Measurements of serum concentrations of des-gamma-carboxy prothrombin (DCP) are widely used for diagnosing hepatocellular carcinoma (HCC). However, the DCP is not always sensitive enough to detect small HCCs. In the current study, the authors investigated the usefulness of DCP in the early diagnosis of HCC, using a more sensitive enzyme immunoassay than is conventionally employed. METHODS: The authors examined 148 serum samples with DCP concentrations from a conventional assay of less than 100 mAU (arbitrary unit)/mL from 91 patients with HCC and 57 with cirrhosis. DCP concentrations were determined by a more sensitive enzyme immunoassay (ED-036 kit, Eisai Laboratory, Tokyo, Japan) with a minimal detection level of 10 mAU/mL. Ninety-one HCC patients had 43 solitary small HCCs (with a greatest dimension of less than 2 cm). Of these 43 HCCs, 12 were well differentiated. RESULTS: The mean serum concentration of DCP in HCC (48.3 +/- 24.3, mean +/- standard deviation [SD]) was higher than in cirrhosis (20.3 +/- 10.3); this difference was statistically significant. When the tentative cutoff level of 40 mAU/mL (almost corresponding to the mean value + 2SD in patients with cirrhosis) was used as the level of discriminating HCC from cirrhosis, 62% of patients (56 of 91) with HCC had DCP values above this level (sensitivity). However, only three patients with cirrhosis had higher DCP levels. Thus, the specificity of this test was 95% (54 of 57 patients). The total accuracy was 74% (56 + 54/91 + 57). Twenty-three of 43 solitary small HCCs (53%) had DCP values above the cutoff level. Furthermore, 7 of 12 (58%) small, well-differentiated HCCs less than 2 cm in greatest dimension had higher DCP values. CONCLUSIONS: The results of this study indicate that DCP determination by sensitive enzyme immunoassay is useful in the early diagnosis of HCC because a high specificity is maintained.     

Distribution of dystrophin and dystrophin-associated protein 43DAG (beta-dystroglycan) in the central nervous system of normal controls and patients with Duchenne muscular dystrophy

The measurement of combustion gases produced by burning aircraft cabin materials poses a continuing limitation for smoke toxicity research. Because toxic effects of gases depend on both their concentrations and the duration of exposure, frequent atmosphere sampling is necessary to define the gas concentration-exposure time curve. A gas chromatographic (GC) method was developed for the simultaneous analyses of carbon monoxide (CO), hydrogen sulfide (H2S), sulfur dioxide (SO2), and hydrogen cyanide (HCN). The method used an MTI M200 dual-column gas chromatograph equipped with 4-m molecular sieve-5A and 8-m PoraPlot-U wall-coated capillary columns and two low-volume, high-sensitivity thermal conductivity detectors. Detectability (in parts per million [ppm]) and retention times (in seconds) for the gases were as follows: CO, 100 ppm, 28 s; H2S, 50 ppm, 26 s; SO2, 125 ppm, 76 s; and HCN, 60 ppm, 108 s. The method was effective for determining these gases in mixtures and in the combustion atmospheres generated by burning wool (CO, HCN, and H2S) and modacrylic fabrics (CO and HCN). Common atmospheric gaseous or combustion products (oxygen, carbon dioxide, nitrogen, water vapor, and other volatiles) did not interfere with the analyses. However, filtration of the combustion atmospheres was necessary to prevent restriction of the GC sampling inlet by smoke particulates. The speed, sensitivity, and selectivity of this method make it suitable for smoke toxicity research and for evaluating performance of passenger protective breathing equipment. Also, this method can potentially be modified to analyze these gases when they are liberated from biosamples.     

Design, fabrication, and control of MEMS-based actuator arrays for air-flow distributed micromanipulation

This paper reports the design, fabrication and control of arrayed microelectromechanical systems (MEMS)-based actuators for distributed micromanipulation by generation and control of an air-flow force field. The authors present an original design of pneumatic microactuator, improving reliability and durability of a distributed planar micromanipulator described in the previous study. The fabrication process is based on silicon-on-insulator (SOI) wafer and HF (hydroflouric acid) vapor release, which also significantly increases the production yield of the 560 microactuator array device of 35/spl times/35 mm/sup 2/. Minimization of the electrostatic actuation pull-in voltage through suspension shaping fabrication was also studied, and successfully validated for electrical efficiency improvement. A distributed control method to achieve good conveyance performance and reduce motion control instability was investigated. An emulation approach was chosen to validate a decentralized control strategy on the distributed active surface in order to conduct a proof-of-concept of a future smart structure, integrating sensors, intelligence, and microactuators. Thus, a centralized/decentralized control flow, inspired by autonomous mobile robot principles, was applied. It was modeled and implemented using C-programming language. Experimental and characterization results validate the control method for feedback micromanipulation with good velocity and load capacity performance.     

Sedimentation of helminth eggs in water

Helminth parasite eggs in low quality water represent health risks when used for irrigation of crops. The settling velocities of helminth eggs (Ascaris suum, Trichuris suis, and Oesophagostomum spp.) and wastewater particles were experimentally determined in tap water and in wastewater using Owen tubes. The settling velocities of eggs in tap water was compared with theoretical settling velocities calculated by Stoke’s law using measurements of size and density of eggs as well as density and viscosity of tap water. The mean settling velocity in tap water of 0.0612 mm s⁻¹ found for A. suum eggs was significantly lower than the corresponding values of 0.1487 mm s⁻¹ for T. suis and 0.1262 mm s⁻¹ for Oesophagostomum spp. eggs. For T. suis and Oesophagostomum spp. eggs the theoretical settling velocities were comparable with the observed velocities in the Owen tubes, while it was three times higher for A. suum eggs. In wastewater, the mean settling velocity for A. suum eggs (0.1582 mm s⁻¹) was found to be different from T. suis (0.0870 mm s⁻¹), Oesophagostomum spp. (0.1051 mm s⁻¹), and wastewater particles (0.0474 mm s⁻¹). This strongly indicates that in low quality water the eggs are incorporated into particle flocs with different settling velocities and that the settling velocity of eggs and particles is closely associated. Our results document that there is a need to differentiate the sedimentation of different types of helminth eggs when assessing the quality of low quality water, e.g. for irrigation usage. The results can also be used to improve existing models for helminth egg removal.     

Exceptional plasticity of silicon nanobridges

The plasticity of covalently bonded materials is a subject at the forefront of materials science, bearing on a wide range of technological and fundamental aspects. However, covalent materials fracture in a brittle manner when the deformation exceeds just a few per cent. It is predicted that a macroscopically brittle material like silicon can show nanoscale plasticity. Here we report the exceptional plasticity observed in silicon nanocontacts ('nanobridges') at room temperature using a special experimental setup combining a transmission electron microscope and a microelectromechanical system. When accounting for surface diffusion, we succeeded in elongating the nanocontact into a wire-like structure, with a fivefold increase in volume, up to more than twenty times the original length. Such a large plasticity was caused by the stress-assisted diffusion and the sliding of the intergranular, amorphous-like material among the nanocrystals.     

Enhanced Production of Bioactive Isoprenoid Compounds from Cell Suspension Cultures of Artemisia annua L. Using β-Cyclodextrins

Plant cell cultures as valuable tools for the production of specific metabolites can be greatly improved by the application of elicitors including cyclodextrins (CDs) for enhancing the yields of the desired plant compounds. Here the effects of 2,6-dimethyl-β-cyclodextrins (DIMEB) on the production of carotenoids and quinones from Artemisia annua L. cell suspension cultures were investigated. The addition of 50 mM DIMEB induced an early increase of intracellular carotenoid and quinone contents, which could be observed to a higher extent for lutein (10-fold), Q9 (3-fold) and Q10 (2.5-fold). Real Time PCR analysis revealed that the expression of 1-deoxy-d-xylulose-5-phosphate reductoisomerase (DXR) gene in DIMEB treated cell cultures after three days was 2.5-fold higher than in untreated samples, thus suggesting that the DIMEB induced increase of carotenoids and quinones could be due to the induction of the plastidial isoprenoid biosynthetic route. In addition, the DIMEB treatment induced an enhanced release of carotenoids and quinones into the culture medium of A. annua cell suspension cultures possibly due to the ability of CDs to form inclusion complexes with hydrophobic molecules.     

Micropore x-ray optics using anisotropic wet etching of (110) silicon wafers

To develop x-ray mirrors for micropore optics, smooth silicon (111) sidewalls obtained after anisotropic wet etching of a silicon (110) wafer were studied. A sample device with 19 microm wide (111) sidewalls was fabricated using a 220 microm thick silicon (110) wafer and potassium hydroxide solution. For what we believe to be the first time, x-ray reflection on the (111) sidewalls was detected in the angular response measurement. Compared to ray-tracing simulations, the surface roughness of the sidewalls was estimated to be 3-5 nm, which is consistent with the atomic force microscope and the surface profiler measurements.