Extraction of all coefficients of coupled-mode equations for natural, single-phase, unidirectional SAW transducers from dispersion characteristics computed by hybrid finite element method

A numerical method is presented for determining all of the coefficients of coupled-mode equations for natural, single-phase, unidirectional SAW transducers (NSP-UDTs). Substituting numerical results computed by the hybrid finite element method for infinite NSPUDTs with shorted and open electric ports into several relations derived from the coupled-mode theory, we can determine all of the coefficients. Specifically, the edge frequencies of a stop-band and the static capacitances yield the self-coupling coefficients and the amplitudes of mutual-coupling and transduction coefficients, and the electric potential standing wave on the substrate surface, which can be derived from the projection of the standing wave distributions of particle displacements and electric potential in the whole substrate onto the set of those predicted by the coupled-mode theory, yields the phases of mutual-coupling and transduction coefficients. NSPUDTs on ST-25°X quartz, Y-51.25°Z LiTaO₃, and 50°Y-25°XLa₃Ga₅SiO₁₄ substrates are investigated. Our results agree well with the earlier experimental ones     

Explosion investigation of asphalt-salt mixtures in a reprocessing plant

Cause investigation of a fire and explosion at the nuclear fuel waste reprocessing plant indicated that self-heating ignition of an asphalt-salt-waste, bituminized, mixture (AS) caused the disaster. A 220l drum was filled with the AS at a temperature of about 180 degrees C. About 20h later the drum ignited and burned as it was being cooled. It is estimated that the AS contained approximately 55wt.% blown asphalt, 25wt.% NaNO(3), 5wt.% NaNO(2), 8wt.% Na(2)CO(3), 2wt.% NaH(2)PO(4), 1wt.% Ba (OH)(2), 1wt.% K(4)[Fe(CN)(6)], and possibly 3wt.% of other materials. To determine the reaction promoting factors and pertinent chemical reaction rates, self-reaction of the AS has been investigated by the use of a C80D heat flux reaction calorimeter. The oxidizing reactions with asphalt are ruled by NaNO(2) rather than by NaNO(3), in spite of a lower concentration of NaNO(2). The kinetic rates of the interfacial reaction between salt particles and asphalt for the reaction controlled and diffusion controlled steps have been formulated as a function of salt particle size for both NaNO(2) and NaNO(3). Numerical solution of the heat balance equations formulating the heterogeneous reaction scheme indicates that a runaway reaction occurs when the AS-filling temperature is 208 degrees C for a drum filled with an AS mixture produced under standard operating conditions. Molecules containing intramolecular hydrogen, such as Na(2)HPO(4) and NaHCO(3), do not oxidize asphalt directly, however, their presence chemically promotes the oxidizing reaction of NaNO(2). Moreover, NaHCO(3) decomposition which produces gases creates many micro holes in the interior of the salt particles. This in turn promotes the oxidizing reactions that are diffusion controlled. Finally, the consequence of a runaway reaction at 180 degrees C or lower is qualitatively explained by taking into account the chemical effect of intramolecular hydrogen and the physical effect of the NaHCO(3) decomposition gases.     

Developmental word acquisition and grammar learning by humanoid robots through a self-organizing incremental neural network.

We present a new approach for online incremental word acquisition and grammar learning by humanoid robots. Using no data set provided in advance, the proposed system grounds language in a physical context, as mediated by its perceptual capacities. It is carried out using show-and-tell procedures, interacting with its human partner. Moreover, this procedure is open-ended for new words and multiword utterances. These facilities are supported by a self-organizing incremental neural network, which can execute online unsupervised classification and topology learning. Embodied with a mental imagery, the system also learns by both top-down and bottom-up processes, which are the syntactic structures that are contained in utterances. Thereby, it performs simple grammar learning. Under such a multimodal scheme, the robot is able to describe online a given physical context (both static and dynamic) through natural language expressions. It can also perform actions through verbal interactions with its human partner.     

10-GHz 8.7-ps Pulse Generation From a Single-Mode Gain-Switched AlGaAs VCSEL at 850 nm

We have successfully generated a 10-GHz 8.7-ps pulse train at 850 nm by using a gain switching technique with a high-speed AlGaAs-based vertical-cavity surface-emitting laser (VCSEL). The VCSEL, which operates in a single transverse mode by employing an aluminum oxide aperture, has a modulation bandwidth of 6.3 GHz and a relaxation oscillation frequency at around 11.7 GHz. An error-free 10-Gb/s return-to-zero data modulation was demonstrated by using the generated 10-GHz pulse train.     

Novel structure of GaAs-based interdigital-gated HEMT plasma devices for solid-state THz wave amplifier

Theoretical analysis of potential distribution in the interdigital-gated high electron mobility transistor (HEMT) plasma wave device was carried out. The dc I–V characteristics of capacitively coupled interdigital structure showed that uniformity of electric field under the interdigital gates was improved compared to the dc-connected interdigital gate structure. Admittance measurements of capacitively coupled interdigital gate structure in the microwave region of 10–40 GHz showed the conductance modulation by drain–source voltage. These results indicate the existence of plasma wave interactions.     

Exoskeletal meal assistance system (EMAS II) for patients with progressive muscular disease

Patients with muscle weakness such as muscular dystrophy usually need someone’s assistance in their daily activities. In order to reduce the caregiver burden and to improve quality of life (QOL) of the patients, various robotic technologies have been developed. This paper presents an exoskeletal assistance system EMAS II for the patients, which assists the upper extremity for the purpose of daily activities such as eating, writing, or other desk works. The EMAS II assists four DOF; shoulder flexion-extension, shoulder abduction-adduction, shoulder medial-lateral rotation, and elbow flexion-extension. The EMAS II has three kinds of user interfaces which are operated by residual functions of the patients, because it is important for patients’ health and initiative to use the residual functions. In order to control the four DOFs exoskeleton system using the interfaces with less DOF, the EMAS II simulates upper limb motion patterns of healthy people. The patterns are modeled by extracting correlations between the height of the wrist joint and that of the elbow joint. Therefore, users have only to control the position of their wrist joint to do tasks at a table. Through an experiment with a healthy subject, the feasibility of meal assistance by the EMAS II was confirmed. Furthermore, the system was applied to a spinal muscular atrophy patient in a clinical trial to check the usability. The experimental results indicated that the EMAS II could support the patient’s upper extremity to do tasks at a table.     

A speeded-up online incremental vision-based loop-closure detection for long-term SLAM

An online incremental method of vision-only loop-closure detection for long-term robot navigation is proposed. The method is based on the scheme of direct feature matching which has recently become more efficient than the Bag-of-Words scheme in many challenging environments. The contributions of the paper are the application of hierarchical k-means to speed-up feature matching time and the improvement of the score calculation technique used to determine the loop-closing location. As a result, the presented method runs quickly in long term while retaining high accuracy. The searching cost has been markedly reduced. The proposed method requires no any off-line dictionary generation processes. It can start anywhere at any times. The evaluation has been done on standard well-known datasets being challenging in perceptual aliasing and dynamic changes. The results show that the proposed method offers high precision-recall in large-scale different environments with real-time computation comparing to other vision-only loop-closure detection methods.     

γ‐Butyrolactone‐processable high‐modulus poly(ester imide)s

γ‐Butyrolactone (GBL)‐processable high modulus heat‐resistant materials were developed in this work. The polyaddition of an ester‐containing tetracarboxylic dianhydride, i.e. hydroquinone bis(trimellitate anhydride) (TAHQ), and 2,2′‐bis(trifluoromethyl)benzidine (TFMB) in GBL resulted in gelation in the initial reaction stage. The incorporation of a methyl group to TAHQ (M‐TAHQ) allowed polymerization with TFMB in GBL and led to a homogeneous poly(ester imide) (PEsI) precursor solution with a short pot life of 3 days, whereas a simple copolymerization approach using bulky/flexible comonomers to TAHQ/TFMB was less effective. PEsI precursors (PEsAAs) were prepared from TFMB, M‐TAHQ and a minor fraction of 4,4′‐(hexafluoroisopropylidene)diphthalic anhydride (6FDA) or a fluorene‐containing tetracarboxylic dianhydride. These PEsAA systems showed drastically improved GBL solution stability. In particular, the M‐TAHQ(80);6FDA(20)/TFMB copolymer system provided a PEsAA film with a very high light transmittance at 365 nm (>70%). A photosensitive film composed of this matrix resin and diazonaphthoquinone provided a clear positive‐tone pattern by development in a 2.38 wt% tetramethylammonium hydroxide aqueous solution at room temperature with a high dissolution contrast. The thermally cured PEsI film achieved a very high tensile modulus (>5 GPa) as the present target with other desirable properties, i.e. sufficient film flexibility, a relatively low coefficient of thermal expansion, a high T_g and low water absorption. The present materials can be promising candidates as novel buffer coat films in semiconductor applications. Copyright © 2011 Society of Chemical Industry     

Forced convective heat transfer to supercritical water flowing in tubes

Experimental investigations were made of heat transfer to supercritical water flowing in a horizontal tube and vertical tubes. A comprehensive set of data was obtained for pressures from 226 to 294 bar, bulk temperatures from 230 to 540°C, heat fluxes from 116 to 930 kW/m² and mass velocities from 310 to 1830 kg/m²s. Because the physical properties of supercritical fluids change rapidly with temperature in the pseudocritical region, the heat transfer coefficients show unusual behavior depending upon the heat flux. At low or modetate heat fluxes relatively to the flow rate, a satisfactory correlation was obtained, which predicts reasonably well the enhanced heat transfer coefficients near the pseudocritical point. The several characteristics of the deterioration in heat transfer which occurs at high heat fluxes were clarified, and the limit heat flux for the occurrence of the deterioration was determined in connection with the flow rate.