Variant versus invariant time to total forgetting: the learn–forget curve model revisited

Understanding and quantifying the learning–forgetting process helps predict the performance of an individual (or a group of individuals), estimate labor costs, bid on new and repeated orders, estimate costs of strikes, schedule production, develop training programs, set time standards, and improve work methods [IIE Trans. 29 (1997) 759]. Although there is agreement that the form of the learning curve is as presented by [J. Aeronaut. Sci. 3 (1936) 122], scientists and practitioners have not yet developed a full understanding of the behavior and factors affecting the forgetting process. The paucity of research on forgetting curves has been attributed to the practical difficulties involved in obtaining data concerning the level of forgetting as a function of time [IIE Transactions 21 (1989) 376]. The learn–forget curve model (LFCM) was shown to have many advantages over other theoretical models that capture the learning–forgetting relationship. However, the deficiency of the LFCM is in the assumption that the time for total forgetting is invariant of the experience gained prior to interruption. This paper attempts to correct this deficiency by incorporating the findings of [Int. J. Ind. Ergon. 10 (1992) 217] into the LFCM. Numerical examples are used to illustrate the behavior of the modified LFCM (MLFCM) and compare results to those of the LFCM.     

Ion Beam Analysis and Normal-State Conduction Mechanisms for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 Superconducting Phases Substituted by Ruthenium

Superconducting samples of type Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ , (Bi, Pb)-2223, with 0.0≤x≤0.4 and type Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ , (Tl, Pb)/Sr-1212, with 0.0≤x≤0.525 were synthesized using the standard solid-state reaction technique. The lattice parameters and the surface morphology for these samples were determined using X-ray powder diffraction (XRD) and scanning electron microscope (SEM) measurements, respectively. All element-contents of the samples prepared were estimated from the electron dispersive X-ray (EDX) technique, and their results were compared with those obtained from particle-induced X-ray emission (PIXE). In addition, the oxygen-content was determined using elastic Rutherford backscattering spectroscopy (RBS) technique at 3 MeV proton beam. The superconducting transition temperature T _c and the hole carrier concentration P were determined from the electrical resistivity measurement. The data of both T _c and P for Bi_1.8Pb_0.4Sr₂Ca_2.1Cu_3−x Ru _x O_10+δ and Tl_0.5Pb_0.5Sr_1.6Ba_0.4CaCu_2−x Ru _x O_7−δ phases increased up to x=0.05 and 0.075, respectively and then they decreased as x increased. The superconductivity was completely destroyed around x=0.4 and 0.525 for (Bi, Pb)-2223 and (Tl, Pb)/Sr-1212 phases, respectively. The normal-state electrical resistivity data were analyzed using the two and three dimensional variable range hopping (2D-VRH and 3D-VRH) and the Coulomb gab (CG).     

Coating of a lignocellulosic aggregate with pectin/polyethylenimin mixtures: Effects on flax shive and cement-shive composite properties

Lignocellulosic lightweight concretes are a potential contributor to sustainable development. However, lignocellulosic aggregates are not always fully compatible with cement matrices leading to setting delays, significant dimensional variations and low mechanical strengths. An aggregate treatment, reducing water absorption and water-soluble molecule release, can avoid or reduce these drawbacks. In this study a coating treatment, using a pectin/polyethylenimin (PP) mixture, was applied to flax shives, which is a lignocellulosic by-product. Before shive coating, a dilution with distilled water or a micro-wave heating were conducted to decrease PP mixture viscosity.The PP treatment involved a decrease in shive water absorption. Compared to standard shive concrete, treated shive concrete exhibited a decrease in setting delay with an increase in cement hydration enthalpy, an increase in mechanical strengths and a significant reduction in dimensional variations. Although a slight increase in thermal conductivity and bulk density was measured, the cement-shive composite obtained still belongs to the insulating concrete category.     

Transmission pricing and recovery of investment costs in the deregulated power system based on optimal circuit prices

Transmission pricing has become a major issue in the discussions about the deregulated electricity markets.Conse-quently,open access to the transmission system is one of the basic topics to allow compe...     

Numerical simulation of transient heat transfer for tomato paste in semi rigid aluminum container

In this study, numerical model of heat transfer for tomato paste in semi-rigid aluminum container was developed by Fluent software 6.3.26. Grid independence was recognized. The impact of head space (air and water -vapor) and buoyancy force on heat transfer were investigated. Simulation results showed slowest heating zone (SHZ) located in (?11.676?<?X?<??10.738, 0.183?<?Y?<?1.269 and 4.417?<?Z?<?5.560) for model with air head space and in (?11.166?<?X?<??11.370, 0.762?<?Y?<?1.21 and 5.480?<?Z?<?5.506) for model with water–vapor head space in Cartesian system coordinate. A thermocouple was connected to container at (0, 0, 10 cartesian system coordinate) to get experimental data during process. Comparing temperatures of experimental model and predicted model (with head space) illustrated no significant difference (p?<?0.05).     

Simulation of a localized heating system for broiler brooding to improve energy performance

The aim of this work is to evaluate the performance of an innovative localized solar‐assisted pen heating system for brooding using a 3D computational simulation model of the heated space. The warm air‐curtained pen ensures acceptable temperature, air velocity, relative humidity, and air quality that meet the ventilation and heat requirements for a typical pen of 100 chicks as recommended by the American Society of Heating Refrigeration and Air Conditioning Engineers and American Society of Agricultural and Biological Engineers. The supply flow characteristics and the simulated velocity and temperature field of the curtained region were determined such that they meet the ventilation requirements and comfort criteria. Results show that air supplied at 40°C is capable of delivering the desired microenvironment at bird level while the heat input to the unit is 685 W when outdoor temperature is ?5°C. The system's energy performance was then analyzed using a prototype of 16 pens. The energy consumption of the new heating scheme consumed one third of the energy required by conventional non‐localized system. Moreover, integrating the new design with a solar system utilizing parabolic concentrators provided 72% of the power load from solar energy during a winter flock operation and 100% during other seasons. Copyright © 2013 John Wiley & Sons, Ltd.     

Charge transport mechanism of graphite‐nanosheet‐loaded rubber nanocomposites

Nitrile butadiene rubber loaded with different concentrations of thin graphite nanosheets have been successfully prepared by using a two‐roll mill. The percolation concentration of the nanocomposites was 0.5 phr. The I–V characteristic curves showed that the nanocomposites exhibited ohmic behaviour at a certain voltage and then non‐linear behaviour. The Richardson–Schottky and Poole–Frenkel models were used to investigate the reason for the space charge. The experimental data fit the Schottky model well. The conductivity as a function of temperature was also studied and the data were fitted by using the Mott relation. The Mott relation showed that as the concentration of graphite nanosheets in the rubber composite increases, the hopping distance between the graphite nanosheet layers decreases, which enhances the conductivity of the nanocomposite at low concentrations. Copyright © 2011 Society of Chemical Industry     

Modified Ultrasonic Technique to Study Gd-Doped ZnO Films

Normal ultrasonic transducers of 0.5, 1, and 2 MHz are modified using delay lines which are made of Quartz. Such modification is to ameliorate the capability of the transducer to investigate Gd-doped ZnO thin films whose thickness is too thin. The normal transducers cannot test materials that have too thin thickness due to the near fields of these transducers. The near field is considered as blind area of the transducer. Therefore, the specimen under test must have thickness bigger than the near field of the used transducer, or instead delay lines can be used. Samples of Gd-doped ZnO thin films are prepared using sol gel technique. The ultrasonic pulse echo method is used at room temperature. Flaws are found in different prepared specimens. Results show that such delay lines are suitable to ameliorate the ultrasonic transducer to test Gd-doped ZnO thin films.