BIOFUMIGANT COMPOUNDS RELEASED BY FIELD PENNYCRESS (<Emphasis Type="Italic">Thlaspi arvense</Emphasis>) SEEDMEAL

Defatted field pennycress (Thlaspi arvense L.) seedmeal was found to completely inhibit seedling germination/emergence when added to a sandy loam soil containing wheat (Triticum aestivum L.) and arugula [Eruca vesicaria (L.) Cav. subsp. sativa (Mill.) Thell.] seeds at levels of 1.0% w/w or higher. Covering the pots with Petri dishes containing the soil-seedmeal mixture decreased germination of both species at the lowest application rate (0.5% w/w), suggesting that the some of the phytotoxins were volatile. CH₂Cl₂, MeOH, and water extracts of the wetted seedmeal were bioassayed against wheat and sicklepod (Senna obtusifolia (L.) H. S. Irwin & Barneby) radicle elongation. Only the CH₂Cl₂ extract was strongly inhibitory to both species. Fractionation of the CH₂Cl₂ extract yielded two major phytotoxins, identified by gas chromatography–mass spectrometry and NMR as 2-propen-1-yl (allyl) isothiocyanate (AITC) and allyl thiocyanate (ATC), which constituted 80.9 and 18.8%, respectively, of the active fraction. When seeds of wheat, arugula and sicklepod were exposed to volatilized AITC and ATC, germination of all three species was completely inhibited by both compounds at concentrations of 5 ppm or less. In field studies, where seedmeal was applied at 0.50, 1.25, and 2.50 kg/m² and tarped with black plastic mulch, all of the treatments significantly reduced dry weight of bioassay plants compared to the tarped control, with the highest seedmeal rate decreasing dry matter to less than 10% of the control 30 d after seedmeal application. Field pennycress seedmeal appears to offer excellent potential as a biofumigant for high-value horticultural crops for both conventional and organic growers.Names are necessary to report factually on available data; however, the USDA neither guarantees nor warrants the standard of the product, and the use of the name by USDA implies no approval of the product to the exclusion of others that may also be suitable.     

Nitrogen dynamics during till and no-till pasture restoration sequences in Rondônia,Brazil

The clearing of tropical rain forest in the Amazon basin has created large areas of cattle pasture that are now declining in productivity. Practices adopted by ranchers to restore productivity to degraded pastures have the potential to alter soil N availability and gaseous N losses from soils. We examined how soil inorganic N pools, net N mineralization and net nitrification rates, nitrification potential and NO and N₂O emissions from soils of a degraded pasture responded to the following restoration treatments: (1) soil tillage followed by replanting of grass and fertilization, (2) no-till application of non-selective herbicide, planting of rice, harvest followed by no-till replanting of grass and fertilization, and (3) the same no-till sequence with soybeans instead of rice. Tillage increased soil NH₄⁺ and NO₃^? pools but NH₄⁺ and NO₃^? pools remained relatively constant in the control and no-till treatments. Cumulative rates of net N mineralization and net nitrification during the first 6 months after treatment varied widely but were hightest in the tilled treatment. Emissions of NO and N₂O fluxes increased with tillage and with N fertilization. There were no clear relationships among rates of N fertilizer application, net N mineralization, net nitrification, NO, N₂O and total N oxide emissions. Our results indicate that pasture restoration sequences involving tilling and fertilizing will increase emissions of N oxides, but the magnitude of the increase is likely to differ based on timing of fertilizer application relative to the presence of plants and the magnitude of plant N demand. Emissions of N oxides appear to be decreased by the use of restoration sequences that minimize reductions in pasture grass cover.     

Synthesis and application of core–shell particles as toughening agents for epoxies

Poly(butadiene-co-styrene) [P(B-S)] core-poly(methyl methacrylate) (PMMA) shell particles were prepared using a two-step emulsion polymerization. These core-shell particles were used to toughen an epoxy polymer. The role of particle-epoxy interfaces were studied by systematically varying the shell compositions of the core-shell particles such as PMMA, P[MMA-acrylonitrile (AN)], P[MMA-glycidyl methacrylate (GMA)] and P[MMA-divinyl benzene(DVB)]. Therefore, the nature of the particle-epoxy interfaces is varied in terms of physical interactions and chemical bonding. The fracture toughness values of the toughened epoxies were measured using linear elastic fracture mechanics. Results indicate that the morphology of the dispersed particles in the epoxy matrix plays an important role in the toughening of epoxies. This degree of dispersion can be varied by incorporating AN and GMA comonomers in the PMMA shells or by crosslinking the shell. In summary, nanoscale interactions of the rubber-matrix interface do not directly influence fracture toughness, instead, it was found that the nanoscale interactions could be used to control the blend morphology which has a dramatic effect on toughness. © 1995 John Wiley & Sons, Inc.     

Continuous production of structured phospholipids in a packed bed reactor with lipase from <Emphasis Type="Italic">Thermomyces lanuginosa</Emphasis>

The possibilities of producing structured phospholipids between soybean phospholipids and caprylic acid by lipase-catalyzed acidolysis were examined in continuous packedbed enzyme reactors. Acidolysis reactions were performed in both a solvent system and a solvent-free system with the commercially immobilized lipase from Thermomyces lanuginosa (Lipozyme TL IM) as catalyst. In the packed bed reactors, different parameters for the lipase-catalyzed acidolysis were elucidated, such as solvent ratio (solvent system), temperature, substrate ratio, residence time, water content, and operation stability. The water content was observed to be very crucial for the acidolysis reaction in packed bed reactors. If no water was added to the substrate during reactions under the solvent-free system, very low incorporation corporation of caprylic acid was observed. In both solvent and solvent-free systems, acyl incorporation was favored by a high substrate ratio between acyl donor and phospholipids, a longer residence time, and a higher reaction temperature. Under certain conditions, the incorporation of around 30% caprylic acid can be obtained in continuous operation with hexane as the solvent. Presented at the 95th American Oil Chemists' Society Annual Meeting and Expo in Cincinnati, Ohio, May 10, 2004.     

Elucidation of the miniemulsion stabilization mechanism and polymerization kinetics

Styrene/hexadecane miniemulsions were polymerized at 50°C using a redox initiator. The miniemulsions and their corresponding latexes were characterized in terms of size, polymerization rate, and surface properties. The resulting data were analyzed to elucidate the miniemulsion stabilization and polymerization mechanisms. It was found that the free surfactant concentration exceeded the critical micelle concentration when large amounts of surfactant (60 mM sodium lauryl sulfate) were used, resulting in simultaneous micellar and droplet nucleation. Most surfactant was on the surface of the droplets (85%) or particles (95%). The fractional surface coverage was proportional to the surfactant concentration to the 0.55 power. Using a particle diameter equation, the number of particles was calculated to be proportional to the surfactant concentration to the 1.35 power. Through direct particle size measurements, a power of 1.38 was confirmed. The rate of polymerization was determined by reaction calorimetry to be proportional to the number of particles to the 0.59 power, in contrast to classical Smith–Ewart kinetics for conventional emulsions (1.0 power). The average number of radicals per particle was estimated from the rate and number data, and varied with the particle diameter to the 0.97 power. The observed kinetic dependencies were validated through an extension of Smith–Ewart theory. © 2003 Wiley Periodicals, Inc. J Appl Polym Sci 90: 3987–3993, 2003     

The Effects Of Humic Substances On Pinus Callus Are Reversed By 2,4-Dichlorophenoxyacetic Acid

The reversal of humic matter-induced inhibition of callus growth and metabolism by 2,4-dichlorophenoxyacetic acid (2,4-D) was studied in Pinus laricio. Two forest humic fractions (relative molecular mass (M_r) > 3500), derived from soil under Fagus sylvatica (Fs) and Abies alba (Aa) plantation, were used. Pinus laricio callus was grown for a subculture period (4 weeks) on Basal Murashige and Skoog (MS) medium plus forest humic matters (Fs or Aa), at a concentration of 1 mg C/l, and then was transferred, for an additional four weeks, to a MS medium culture without humic matter, but with different hormones: indole-3-acetic acid (IAA, 2 mg/1) or 2,4-dichlorophenoxyacetic acid (2,4-D, 0.5 mg/1) and/or 6-benzylaminopurine (BAP, 0.25 mg/1). Growth of calluse, glucose, fructose, and sucrose contents, and activities of soluble and bound invertases, glucokinase, phosphoglucose isomerase, aldolase, and pyruvate kinase were monitored. The results show a negative effect of humic fractions on callus growth, due to decreased utilization of glucose and fructose, and decreased activities of glycolytic enzymes. The effects are reversible. Substitution of humic fractions with 2,4-D+BAP or 2,4-D is followed by an increase of glycolytic enzyme activities and, consequently, by the utilization of glucose and fructose that induces a restart of growth. In contrast, the inhibitory effects of humic fractions persist when they are substituted with BAP alone, indicating that only the auxin 2,4-D is capable of reversing the negative effects. A possible competitive action on the auxin-binding site between 2,4-D and the chemical structures in the forest humic fractions is suggested.     

Synthesis and self-association in aqueous media of poly(ethylene oxide)/poly(ethyl glycidyl carbamate) amphiphilic block copolymers

New temperature sensitive AB, ABA, and BAB amphiphilic block copolymers consisting of hydrophilic poly(ethylene oxide) and hydrophobic poly(ethyl glycidyl carbamate) blocks were synthesized by anionic polymerization followed by chemical modification reactions. The self-association of the block copolymers in aqueous media was studied by UV-vis spectroscopy and dynamic and static light scattering. The obtained block copolymers spontaneously form micelles in aqueous media. The critical micellization concentration varied from 0.5 to 4 g/L depending on the copolymer architecture and composition. The influence of the temperature upon the self-association of the block copolymers was investigated. The increase of temperature did not affect the value of the critical micellization concentration, but led to the formation of better defined micelles with narrow size distribution.     

Effect of sodium monofluorophosphate treatment on microstructure and frost salt scaling durability of slag cement paste

Sodium-monofluorophosphate (Na-MFP) is currently in use as a surface applied corrosion inhibitor in the concrete industry. Its basic mechanism is to protect the passive layer of the reinforcement steel against disruption due to carbonation. Carbonation is known as the most detrimental environmental effect on blast furnace slag cement (BFSC) concrete with respect to frost salt scaling. In this paper the effect of Na-MFP on the microstructure and frost salt scaling resistance of carbonated BFSC paste is presented. The results of electron microscopy, mercury intrusion porosimetry (MIP) and X-ray diffraction (XRD) are discussed. It is found that the treatment modifies the microstructure and improves the resistance of carbonated BFSC paste against frost salt attack.     

Preparation of a tubular palladium membrane by photocatalytic deposition

A novel photocatalytic deposition method for the preparation of a thin tubular palladium membrane is presented in this paper. The membrane is prepared on a porous asymmetric TiO₂ support by photocatalytic reaction of palladium ion, followed by electroless plating. Gas permeation results show that the membrane exhibits increased hydrogen permeance with the increase of temperature. The hydrogen permeance and selectivity to nitrogen at 773 K are about 1.43×l0⁻⁶ mol m⁻² s⁻¹ Pa⁻¹ and 17, respectively, when the pressure in the feed side is 0.1 MPa. The activation energy of hydrogen permeation is 11.06 kJ/mol at the temperature range of 573–773 K.     

Cationic surfactant-selective potentiometric sensors based on neutral ion-pair carrier complexes

Poly(vinyl chloride) (PVC) membrane electrodes to determine monomer concentrations of tetradecyltrimethylammonium ion (TTA⁺) and hexadecylpyridinium ion (HPy⁺) based on neutral ion-pair carrier complexes of tetradecyltrimethylammonium dodecyl sulfate (TTA⁺-DS⁻) and hexadecylpyridinium dodecyl sulfate (HPy⁺-DS⁻), respectively, are reported here. The electrodes exhibit a Nernstian slope of 59 mV per decade for TTA⁺ and a sub-Nernstian slope of 34.5 mV per decade for HPy⁺ ions. The TTA⁺ ion-selective electrode (ISE) and the HPy⁺-ISE can determine the monomer units down to concentrations as low as 4.0×10⁻⁴M and 1.66×10⁻⁵ M, respectively. The effect of various additives, such as the anionic polyelectrolyte sodium dextran sulfate and macrocyclic β-cyclodextrin, on the surface activity exhibited by the cationic surfactants TTA⁺-DS⁻ and HPy⁺-DS⁻, in the presence of background concentrations of NaCl was also examined with surfactant-selective sensors. The Gibbs free energy of micelle formation (ΔG _m ) of both surfactants in the presence of various additives was calculated and found to be less favorable with respect to an increase in the amount of additives due to less availability of cationic surfactant monomer units. The ion-pair complexes TTA⁺-DS⁻ and HPy⁺-DS⁻ were found to behave as selective carrier compounds in PVC membranes in determining the concentration of monomer units of both TTA⁺ and HPy⁺, respectively. The proposed sensors worked well at a fairly acidic pH of 1–6.5 with response time of 60 s. The sensors responded well to the surfactant ions even in the presence of additives at lower concentration. The lifetime of the sensors is 3 mon.