Free volume and permeabilities of O2 and H2 in Nafion membranes for polymer electrolyte fuel cells

The mechanism of gas permeation in Nafion membranes for polymer electrolyte fuel cells has been investigated from the viewpoint of free volume. Three different samples, a membrane with ionic exchange capacity (IEC) = 0.92 meq/g, and recast samples with IEC = 0.92 and 1.00 meq/g were used after drying. Free volume was quantified using the positron annihilation lifetime (PAL) technique and gas permeabilities were measured for O₂ and H₂ as functions of temperature and relative humidity. Good linear correlations between the logarithm of the permeabilities at different temperatures and reciprocal free volume indicate that gas permeation in dry Nafion is governed by the free volume. Nevertheless permeabilities are much smaller than the corresponding flexible chain polymer with a similar free volume size due to stiff chains of the perfluoroethylene backbone. In highly hydrated Nafion above 60% relative humidity, where the O₂ permeability varies oppositely to the free volume, gas permeation proved to be controlled by the gradual increase in overall flexibility of the Nafion–water system.     

X-linked juvenile retinoschisis: localization between (DXS1195, DXS418) and AFM291wf5 on a single YAC

We studied 17 pedigrees with 108 affected males with X-linked juvenile retinoschisis (RS; McKusick No. 31270) and have analyzed all of the known polymorphic markers in the RS region of Xp22.1-p22.2 between DXS987 and DXS41. By haplotype analyses we found 7 individuals who showed crossovers in this interval surrounding RS. We previously reported AFM291wf5 as the centromeric boundary, and this remains unchanged in the present study. A new recombination was identified on the telomeric side at (DXS1195, DXS418). Our data support the locus order Xpter--(DXS987, DXS207, DXS1053, DXS43)--(DXS1195, DXS418)--(RS, DXS257, DXS999)--(AFM291wf5, DXS443)--DXS1052--(DXS1226, DXS274, DXS41)--Xcen; loci grouped in parentheses could not be mutually ordered by our genetic data. Physical mapping has indicated a distance of at most 900-1,000 kb between (DXS1195, DXS418) and AFM291wf5. No recombination was observed between RS and DXS257 which lies in our new interval of interest, but one critical individual was not informative with this marker. Our data now define the smallest RS inclusion interval. This interval is contained on a single YAC from which we have identified expressed sequences as candidate genes for RS.     

Evaluation of a dual-color flow cytometry immunophenotyping panel in a multicenter quality assurance program

A basic immunophenotyping panel that employed dual-color combinations of fluorescein isothiocyanate (FITC) and phycoerythrin (PE) conjugated monoclonal antibodies (mAb; FITC-CD45/PE-CD14, FITC-IgG1/PE-IgG2, FITC-CD3/PE-CD8, FITC-CD3/PE-CD4, FITC-CD3/PE-CD16 + PE-CD56, and PE-CD19) was utilized in a quality assurance program to determine whether the 4 laboratories participating in a multicenter AIDS study obtained similar lymphocyte subset percentage values for T cells, B cells, NK cells, and CD4+ and CD8+ T cells. Over a 1 1/2 year period, 78 shared peripheral blood specimens were prepared and analyzed in each laboratory. The CD45bright CD14- percentage for each specimen was used to correct that individual's lymphocyte subset values. Interlaboratory coefficients of variation (CV) for the human immunodeficiency virus type I (HIV) seronegative (n = 38) and HIV-seropositive (n = 40) specimens using this panel were < 3% for total T cells; < 5% for CD4+ T cells and CD8+ T cells; < or = 17% for B and NK cells; and < 8% for CD4T/CD8T ratios. The 6-tube basic immunophenotyping panel has several notable features: a) for clinical studies, it permits comprehensive evaluation of an individual's major lymphocyte subsets, i.e., T, B, NK, and CD4+ and CD8+ T cells; b) for interlaboratory proficiency testing programs, it allows the detection of differences among laboratories in measurements of several functionally distinct cell populations; and c) for within-sample quality assurance, it provides several quality control checks, including the lymphosum, i.e., the sum of an individual's corrected T+B+NK values, a sum that was generally 100 +/- 5% on the HIV-seronegative specimens analyzed in this study.     

Notch in contrast sensitivity function of optical origin: diffraction effects of acrylic filters

It was for the first time that of the fifth year of monitoring of Plantago lanceolata L., reproduced within the thirty-kilometer zone of Chernobyl NPP disaster, the authors discovered high incidence of seedlings with various morphological abnormalities. It is suggested that the damages observed are related to the cumulative effect of radiation.     

KINEMATIC VISCOSITY-TEMPERATURE BEHAVIOR OF HEAVY TBP-FRACTIONS (455°C+) OF ARABIAN CRUDE OILS

A generalized kinematic viscosity-temperature correlation for undefined liquid heavy petroleum fractions has been developed to represent the data for a wide range of temperature from 100°C to 200°C. The correlation is based on the experimental kinematic viscosity data of true boiling point fractions of four Arabian crude oils. The characterization property required for estimation is 50% boiling point. The proposed correlation fits the experimental data with an overall absolute error of 6.1%. Experimental measurements of kinematic viscosity of heavy true boiling point fractions of Arabian crude oils were also obtained in order to develop the proposed correlation.     

Molecular characterization of erythrocyte glucose-6-phosphate dehydrogenase deficiency in Al-Ain District, United Arab Emirates

Operational skills involved in controlling a motor vehicle were measured in two groups of very healthy elderly drivers and a young control group to test the hypothesis that there are age-related declines in operational performance that may influence driver safety. An actual behind-the-wheel, standardized road test was employed using a motor vehicle equipped with sensors to record speed, braking activity, and lane position, as well as direction and magnitude of front-wheel and eye-movement excursions. The data from these sensors were used as dependent measures of operational performance. Older drivers made fewer steering and eye-movement excursions and drifted across the center line more frequently than the young control group. Younger drivers drove significantly faster and executed more braking applications than did their older counterparts. The motor-vehicle operational performance of older healthy drivers was related to visual-spatial attentional declines and the useful field of vision associated with the normal aging process.     

Effects of Ajoene on lymphocyte and macrophage membrane-dependent functions

An increasing flow of evidences collected on elementary forms of learning processes in selected animal models evidentiates some mechanisms which can represent the basic cellular principles underlying plastic changes: 1. 5HT and second messengers of nucleotide type (like cAMP) have a pivotal role in the learning process. 2. In almost all short-term learning processes the modifications are subserved by a mechanism of protein phosphorylation. 3. In various animal models the modulation of K+ and Ca2+ channels is the molecular mechanism for learning. Experiments performed in sensory T neuron of the leech indicate that the modulation of Na+/K+ electrogenic pump is one of the fundamental mechanism for learning. 4. In long-term plastic changes, the most important finding is that newly synthesized proteins are formed. 5. In addition to what has been observed in the Aplysia model, where changes in synaptic efficacy represent the basic principles of memory storage, in the leech it has been demonstrated that a molecular machinery present in a single neuron can adapt the activity of the cell to environmental stimuli.     

Conical magnetic bearings with radial and thrust control

Conical magnetic bearings with radial and thrust (axial) control are discussed. First a model of the conical bearing is made in state variable form. Airgap flux, airgap displacement, and velocity are used as state variables. A control method based on recent developments in control theory is proposed. The method is called Q-parameterization theory and is used to design a stabilizing controller for the system which, without control, is unstable in nature. The controller parameters are chosen using console (a software tandem for interactive optimization-based design) so that all design requirements are satisfied. Digital simulation was used to verify the proposed control method. Transient responses, forced responses in all three directions (vertical, horizontal, and axial), and the interactions between them are obtained. The results obtained are satisfactory and suggest the robustness of the proposed technique