Influences of Mn doping on the microstructural,semiconducting, and optoelectronic properties of HgO nanostructure films

Mn-doped HgO nanostructured thin films (Hg_1-xMn_xO) have been prepared using electron beam evaporation technique on Corning glass (1022) substrate at room temperature with different concentrations x = 0, 0.015, 0.05, 0.1, 0.15, and 0.2. The microstructural, morphological, semiconducting, and optoelectronic properties of the films have been investigated. The X-ray diffraction spectra suggest a hexagonal wurtzite type structure with lattice parameters decreased with increasing Mn content. It was found that the average particle size of the films decreases with increasing Mn doping which is confirmed by FE-SEM and AFM micrographs. The optical band gap of the investigated Mn-doped HgO nanocrystalline films is determined from the absorption coefficient and found to increase with the increase of Mn concentration which is attributed to the sp-d exchange interaction and/or the quantum confinement effect. The refractive index and extinction coefficient of the Mn-doped HgO films are also reported. The refractive index dispersion n(λ) is analyzed by single-effective-oscillator dispersion model proposed by the Wemple–DiDomenico (WDD). The oscillator parameters were estimated. The obtained dispersion values are suitable for the design of optoelectronic devices.     

Dielectric and mechanical optimization properties of porous poly(ethylene‐co‐vinyl acetate) copolymer films for pseudo‐piezoelectric effect

In this article, the authors present a porous copolymer film with pseudo‐piezoelectric effects as a new candidate material for sensing applications. Porous films of poly(ethylene‐co‐vinyl acetate) (EVA) with a thicknesses ranging from 160 to 310 μm are fabricated by a coextrusion chemical foaming process and charged using a high‐voltage contact charging process. Output performances (piezoelectric constant and relative permittivity) with related thermal/mechanical stability are specifically studied as a function of the film porosity and of the electrical charging process. The piezoelectric constant d₃₃ increases with the cell porosity and an interesting piezoelectric constant close to 5.1 pC/N is achieved with a porous EVA film containing 65% of porosity. Actual results are then discussed using a theoretical solid–gas multilayer model to describe and predict the pseudo‐piezoelectric effect of porous polymer materials. The originality of this work lies in the fact that all the steps leading to optimize pseudo piezoelectric films are included, and also in the use of EVA which is not a standard piezoelectric material. Therefore, this work is a contribution in the development of low‐cost piezoelectric materials with potential applications as sensor in different fields such as medical, security, environment, sport, and transport. POLYM. ENG. SCI., 59:1455–1461 2019. © 2019 Society of Plastics Engineers     

Diglycidyl ether of bisphenol A/chitosan‐graft‐polyaniline composites with electromagnetic interference shielding properties: Synthesis,characterization, and curing kinetics

Conducting filler based on chitosan and grafted polyaniline (Ch‐g‐PANI) was prepared with different grafting ratios and used as fillers for polyester powder coating system. Differential scanning calorimetry is applied to study the effect of Ch‐g‐PANI on the curing of the polyester powder coating. The activation energy calculated by isoconversional Kissinger method was increased by either increasing the Ch‐g‐PANI content or the content of polyaniline in the filler, suggesting the contribution of the filler in the curing reactions. The cured samples were characterized using FTIR and TG analyses. Thermogravimetric analysis showed that the total thermal stability was enhanced upon the filler addition as detected from the values of integral procedural decomposition temperature. Furthermore, a dielectric study showed that the dielectric constant and loss were increased upon increasing of the filler. Vogel–Fulcher–Tammann equation was well‐fitted when used to examine the dependence of α‐relaxation on the temperature and the dielectrically calculated T_g values were comparable to that measured by DSC. The shielding effectiveness toward microwaves was enhanced by increasing the filler content. POLYM. ENG. SCI., 59:372–381, 2019. © 2018 Society of Plastics Engineers     

Medium-chain-length poly-3-hydroxyalkanoates-carbon nanotubes composite as proton exchange membrane in microbial fuel cell

Medium-chain-length poly-3-hydroxyalkanoates (PHA) and carboxyl group-functionalized multiwalled carbon nanotubes (MC) were used to fabricate a composite membrane for application in a double-chambered microbial fuel cell (MFC). MC was composited into PHA at 5%, 10%, and 20% w/w via ultrasound dispersion blending method. PHA-MC composite was compared with Nafion 117 as proton exchange membrane in MFC operated with palm oil mill effluent (POME) wastewater. The composite exhibited prerequisite separator membrane characteristics. The dispersion of MC in the polymer matrix increased its interfacial surface area and water uptake properties. PHA-MC10% membrane in MFC showed maximum power density of 361?mW/m², which was comparable with Nafion 117 (372?mW/m²). Internal resistance decrease, chemical oxygen demand (COD) removal, coulombic efficiency (CE), and conductivity of the PHA-MC10% were superior to Nafion 117. The environmental-friendly material could provide an alternative towards realizing practical MFC application.     

Antimicrobial materials based on poly(ethylene-co-vinyl alcohol) and silver acetate produced by reactive extrusion

The use of silver as an antimicrobial agent has exhibited great interest in recent years. In this research, poly(ethylene-co-vinyl alcohol) (EVOH)–silver acetate-based antimicrobial materials were prepared at high temperature by reactive extrusion. Silver acetates were used without pretreatment. The thermal reaction of silver acetates in the material and their effect on the thermal and mechanical properties of the polymer were investigated as a function of their concentration. The dispersed silver acetate salts within the EVOH matrix have displayed a significant thermal reaction. This reaction of metallic salts was partial when the extrusion temperature was fixed at 190 °C and completed at 230 °C. The antimicrobial agents also had significant effects on the properties of the matrix. Reductions of glass temperature and storage modulus were observed by the analyses. All the variations were dependent on both the concentration of silver acetate and the extrusion parameters. The antimicrobial activity was studied and demonstrated a promising potential to create an antimicrobial material in a one-step solvent free extrusion method. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2019 , 136, 47799.     

Designing zinc oxide nanostructures (nanoworms,nanoflowers, nanowalls,and nanorods) by pulsed laser ablation technique for gas-sensing application

In this study, pulsed laser ablation technique, also known as pulsed laser deposition (PLD), is used to design and grow zinc oxide (ZnO) nanostructures (nanoworms, nanowalls, and nanorods) by template/seeding approach for gas-sensing applications. Conventionally, ZnO nanostructures used for gas-sensing have been usually prepared via chemical route, where the 3D/2D nanostructures are chemically synthesized and subsequently plated on an appropriate substrate. However, using pulsed laser ablation technique, the ZnO nanostructures are structurally designed and grown directly on a substrate using a two-step temperature-pressure seeding approach. This approach has been optimized to design various ZnO nanostructures by understanding the effect of substrate temperature in the 300-750°C range under O₂ gas pressure from 10-mTorr to 10 Torr. Using a thin ZnO seed layer as template that is deposited first at substrate temperature of ~300°C at background oxygen pressure of 10 mTorr on Si(100), ZnO nanostructures, such as nanoworms, nanowalls, and nanorods (with secondary flower-like growth) were grown at substrate temperatures and oxygen background pressures of (550°C and 2 Torr), (550°C and 0.5 Torr), and (650°C and 2 Torr), respectively. The morphology and the optical properties of ZnO nanostructures were examined by Scanning Electron Microscope (SEM-EDX), X-ray Diffraction (XRD), and photoluminescence (PL). The PLD-grown ZnO nanostructures are single-crystals and are highly oriented in the c-axis. The vapor-solid (VS) model is proposed to be responsible for the growth of ZnO nanostructures by PLD process. Furthermore, the ZnO nanowall structure is a very promising nanostructure due to its very high surface-to-volume ratio. Although ZnO nanowalls have been grown by other methods for sensor application, to this date, only a very few ZnO nanowalls have been grown by PLD for this purpose. In this regard, ZnO nanowall structures are deposited by PLD on an Al₂O₃ test sensor and assessed for their responses to CO and ethanol gases at 50 ppm, where good responses were observed at 350 and 400°C, respectively. The PLD-grown ZnO nanostructures are very excellent materials for potential applications such as in dye-sensitized solar cells, perovskite solar cells and biological and gas sensors.     

Preparation of a hydrophobic recycled jute-based nonwoven using a titanium dioxide/stearic acid coating

This work aims at developing a hydrophobic treatment for jute fiber-based nonwovens. Three solutions of titanium dioxide (TiO₂) nanoparticles were prepared through a sol–gel method by varying the molar ratio of the various constituents. The nonwoven was pretreated with these solutions before being impregnated with different concentrations of stearic acid. The TiO₂ nanoparticles synthesized are amorphous; their size varies with the concentration of ethanol used as a solvent in the sol–gel method. The nanoparticle coating produced on the jute fibers is uniform. The nonwoven wettability was evaluated by measuring its water contact angle and retention time; the nonwoven became hydrophobic at the lowest fatty acid concentration tested. An increase in the stability of the hydrophobicity was observed when the TiO₂ nanoparticle pretreatment was used compared to the application of the stearic acid treatment only. No detrimental effect of the hydrophobic treatment on the nonwoven mechanical performance and thermal stability was observed. These results demonstrate the potential of the TiO₂ nanoparticle/stearic acid treatment as a fast method to provide a stable hydrophobicity to recycled jute-based nonwovens.