Formation and Phase Behavior of Winsor Type III <Emphasis Type="Italic">Jatropha curcas</Emphasis>-Based Microemulsion Systems

The formation and phase behavior of Jatropha curcas-based microemulsion systems, which could potentially be used in enhanced oil recovery applications, has been investigated. Winsor type III microemulsions were obtained by adding n-octane to Winsor type I microemulsion systems prepared using various concentrations of alkyl polyglucoside (APG). To optimize the formulation of type III microemulsion systems, five different types of co-surfactants, i.e. normal butyl alcohol (NBA), isobutyl alcohol, isopropyl alcohol, fatty acid alcohol C8 (FAC8) and fatty acid alcohol C8/C10 (FAC8/C10) were used. The microemulsion phase behavior was determined along with particle size distributions by dynamic light scattering measurements. Results show that the optimum Winston type III system can be achieved by mixing 3 wt% of NBA, 1 wt% APG and 3 wt% NaCl. At the optimum formulation, the IFT reached a minimum value (0.016 mN/m) and formed very small emulsion droplets with a narrow particle size distribution.     

Synthesis and Evaluation of Bis-quaternary-Based Surfactants as Additives for Water-Based Mud

Two series of cationic gemini surfactants, alkanediyl-α,ω-bis[N,N-dimethyl alkyl (octyl or dodecyl)ammonium] dibromide (R-s-R; s = 6, 10, 12 and R = 8 and 12) were prepared and evaluated as additives for water-based mud. The chemical structures of the prepared surfactants were confirmed using FTIR and mass spectroscopy. Surface activity of these compounds has been studied and their surface properties including surface tension, emulsification power, critical micelle concentration, effectiveness, maximum surface excess and minimum surface area were determined. The results showed that the prepared compounds have significant surface activity, especially those of longer hydrophobic chain length. The prepared cationic gemini surfactants were evaluated as viscosifiers and filter loss additives for water-based mud formulated from local Na-montmorillonite clay. XRD analysis was carried out to the Na-montmorillonite clay to determine the interaction of the surfactants with inter layers of the clay structure. Rheological properties, gel strength, thixotropy, filtration properties and the effect of temperature on rheological properties of the water-based mud were studied. The results indicated that the gemini surfactants have a positive effect on the rheological and filtration properties of the Na-montmorillonite clay according to American Petroleum Institute specifications.     

Sulfonated Beet Pulp as Solid Catalyst in One-Step Esterification of Industrial Palm Fatty Acid Distillate

In this research a new heterogeneous catalyst has been prepared for biodiesel production. The catalyst was prepared by sulfonating industrial sugar waste. Unlike homogeneous catalysts, which require further purification and separation from the biodiesel production reaction media, this inexpensive synthetic catalyst does not need to go through an additional separation process. This advantage consequently minimizes the total application costs. The catalyst was prepared by partially carbonizing sugar beet pulp at 400 °C. The carbonization product was then sulfonated with concentrated H₂SO₄ vapor in order to produce a solid catalyst. The prepared catalyst was used in the esterification reaction between palm fatty acid distillate (PFAD) and methanol. The effects of the temperature, methanol/PFAD ratio, reaction time and catalyst dosage on the efficiency of the production were individually investigated. The optimum biodiesel production occurred at 85 °C, a reaction time of 300 min, catalyst dosage of 3 g and methanol/PFAD ratio of 5:1 (mol/mol), lowering the acid value from 198 to 13.1 (mg KOH/g oil) or the equivalent, with a fatty acid methyl ester yield of around 92 %. The results suggest that the synthesized inexpensive catalyst is useful for biodiesel production from PFAD.     

Investigation of the mechanical and thermal fatigue properties of hybrid sol–gel coatings applied to AA2024 substrates

This research article reports on the response of various hybrid sol–gel materials when applied as coatings to pre-treated bare AA2024 substrates, to mechanical indentation and cyclic thermal stimuli, in order to determine their usefulness in aeronautical applications. Three groups of hybrid sol–gel-coated samples were prepared using various organosilanes and transition metal oxides. The characterization of the materials revealed that the presence of the organic functionalities, especially the methacrylate group, has a noticeable effect on the mechanical response of the hybrid coatings, in particular their flexibility. The presence of methacrylate group in the cured material gives it ability to flex which influenced the thermal fatigue characteristics of the coatings which are able to withstand the cyclic temperature regimes of 82 ± 3 to ?37 ± 3°C over 25 2 h cycles. This capability to maintain substrate protection is reflected in the corrosion resistance of the coatings as measured using electrochemical impedance spectroscopy and accelerated exposure testing. This result is important, as it shows that hybrid sol–gel materials can be used in applications where protecting a metal or ally substrate is paramount, especially in thermally volatile environments.     

Dense Al2O3/ZrO2 Particulate Composites by Free Sintering of Coated Powders

Composite powders, prepared by coating coarse ZrO₂ particles with fine Al₂O₃ powder using a chemical precipitation technique, were compacted and sintered freely at a constant heating rate of 4°C/min to ∼1600°C. Composites containing up to ∼30 vol% inclusions were sintered to nearly full density under the same conditions used for the unreinforced matrix. Furthermore, the sintering kinetics were not influenced significantly by the inclusion volume fraction. The sinterability of the composites formed from the coated powders was significantly better than that for similar composites formed from mechanically mixed powders. The present data provide a further demonstration that the use of coated powders may have widespread applicability for the fabrication, by free sintering, of dense ceramic particulate composites.     

ON THE INVERTIBILITY OF PERIODIC MOVING-AVERAGE MODELS

Abstract. A sufficient condition for the invertibility of univariate periodic moving-average models has been given by Cipra and Ghysels and Hall. We show that this condition is not a necessary one, and provide a necessary and sufficient condition for the general m -variate, d -periodical moving-average MA( q ) case.     

THE DYNAMIC BEHAVIOR AND CHAOS FOR TWO PARALLEL REACTIONS IN A CONTINUOUS STIRRED TANK REACTOR

The dynamical behavior for two parallel reactions in a continuous stirred tank reactor (CSTR) is considered. The global maximum number of steady states is five. Stability conditions are obtained. When the steady state is unique and unstable, a circulating attractor is proven to exist. The orbit structure is numerically found to consist of periodic orbits and chaotic behavior.     

Synthesis of some new disperse anthraquinone dyes

1-Hydroxy and/or 1-aminoanthraquinone was allowed to react with formaldehyde in an alkaline medium to give 1-hydroxy or 1-amino-2-hydroxymethyl-9,10-dihydroxy-anthracenes, which gave on air oxidation, hydroxymethylanthraquinone derivatives (I). Interaction of 1-amino-2-hydroxymethylanthraquinone or its 4-bromo derivative with carbonyl compounds in the presence of an acid catalyst gave (1,3)oxazine derivatives (II). The methylene group in position-2 of the (1,3)oxazine ring was found to be highly reactive and reacted with carbonyl compounds to form the corresponding arylidenes (III). Selective oxidation of dimethyl oxazine derivatives with SeO₂ gave the corresponding dialdehyde (IV), which interacted with aromatic amines to give the corresponding Schiff bases (V). The bromine atom in the 6-position of II was easily replaced by aromatic amines to give blue disperse dyes (VI).