Emerging gallium nitride based devices

Wide bandgap GaN has long been sought for its applications to blue and UV emitters and high temperature/high power electronic devices. Recent introduction of commercial blue and blue-green LED's have led to a plethora of activity in all three continents into the heterostructures based on GaN and its alloys with AlN and InN. In this review, the status and future prospects of emerging wide bandgap gallium nitride semiconductor devices are discussed. Recent successes in p-doping of GaN and its alloys with InN and AlN, and in n-doping with much reduced background concentrations have paved the way for the design, fabrication, and characterization of devices such as MESFET's, MISFET's, HBT's, LED's, and optically pumped lasers. We discuss the electrical properties of these devices and their drawbacks followed by future prospects. After a short elucidation of materials characteristics of the nitrides, we explore their electrical transport properties in detail. Recent progress in processing such as formation of low-resistance ohmic contacts and etching is also presented. The promising features of quarternaries and double heterostructures in relation to possible current injection lasers, LED's, and photodetectors are also elaborated on     

Constraining Si Particles within Graphene Foam Monolith: Interfacial Modification for High‐Performance Li+ Storage and Flexible Integrated Configuration

Pulverization of electrode materials and loss of electrical contact have been identified as the major causes for the performance deterioration of alloy anodes in Li‐ion batteries. This study presents the hierarchical arrangement of spatially confining silicon nanoparticles (Si NPs) within graphene foam (GF) for alleviating these issues. Through a freeze‐drying method, the highly oriented GF monolith is engineered to fully encapsulate the Si NPs, serving not only as a robust framework with the well‐accessible thoroughfares for electrolyte percolation but also a physical blocking layer to restrain Si from direct exposure to the electrolyte. In return, the pillar effect of Si NPs prevents the graphene sheets from restacking while preserving the highly efficient electron/Li⁺ transport channels. When evaluated as a binder‐free anode, impressive cycle performance is realized in both half‐cell and full‐cell configurations. Operando X‐ray diffraction and in‐house X‐ray photoelectron spectroscopy confirm the pivotal protection of GF to sheathe the most volume‐expanded lithiated phase (Li₁₅Si₄) at room temperature. Furthermore, a free‐standing composite film is developed through readjusting the pore size in GF/Si monolith and directly integrated with nanocellulose membrane (NCM) separator. Because of the good electrical conductivity and structural integrity of the GF monolith as well as the flexibility of the NCM separator, the as‐developed GF/Si‐NCM electrode showcases the potential use in the flexible electronic devices.     

Improved Message Forwarding for Multi-Hop HaRTES Real-Time Ethernet Networks

Nowadays, switched Ethernet networks are used in complex systems that encompass tens to hundreds of nodes and thousands of signals. Such scenarios require multi-switch architectures where communications frequently occur in multiple hops. In this paper we investigate techniques to allow efficient multi-hop communication using HaRTES switches. These are modified Ethernet switches that provide real-time traffic scheduling, dynamic bandwidth management and temporal isolation between real-time and non-real-time traffic. This paper addresses the problem of forwarding traffic in HaRTES networks. Two methods have been recently proposed, namely Distributed Global Scheduling (DGS) that buffers traffic between switches, and Reduced Buffering Scheme (RBS), that uses immediate forwarding. In this paper, we discuss the design and implementation of RBS within HaRTES and we carry out an experimental validation with a prototype implementation. Then, we carry out a comparison between RBS and DGS using worst-case response time analysis and simulation. The comparison clearly establishes the superiority of RBS concerning end-to-end response times. In fact, with sample message sets, we achieved reductions in end-to-end delay that were as high as 80 %.     

Speech frame recognition based on less shift sensitive wavelet filter banks

The wavelet transform possesses multi-resolution property and high localization performance; hence, it can be optimized for speech recognition. In our previous work, we show that redundant wavelet filter bank parameters work better in speech recognition task, because they are much less shift sensitive than those of critically sampled discrete wavelet transform (DWT). In this paper, three types of wavelet representations are introduced, including features based on dual-tree complex wavelet transform (DT-CWT), perceptual dual-tree complex wavelet transform, and four-channel double-density discrete wavelet transform (FCDDDWT). Then, appropriate filter values for DT-CWT and FCDDDWT are proposed. The performances of the proposed wavelet representations are compared in a phoneme recognition task using special form of the time-delay neural networks. Performance evaluations confirm that dual-tree complex wavelet filter banks outperform conventional DWT in speech recognition systems. The proposed perceptual dual-tree complex wavelet filter bank results in up to approximately 9.82 % recognition rate increase, compared to the critically sampled two-channel wavelet filter bank.     

Energy efficiency optimization of one-way and two-way DF relaying considering circuit power

In this paper, the energy efficiency (EE) of a decode and forward (DF) relay system is studied, where two sources communicate through a half-duplex relay node in one-way and two-way relaying strategies. Both the circuitry power and the transmission power of all nodes are taken into consideration. In addition, three different coding schemes for two-way DF relaying strategy with two phases and two-way DF relaying with three phases are considered. The aim is to maximize the EE of the system for a constant spectral efficiency (SE). For this purpose, the transmission time and the transmission power of each node are optimized. Simulations are used to compare the EE–SE curve of different DF strategies with one-way and two-way amplify and forward (AF) strategies and direct transmission (DT), to find the best energy efficient strategy in different SE conditions. Analytical and simulation results demonstrate that in low SE conditions, DF relaying strategies are more energy efficient compared to that of AF strategies and DT. However, in high SE conditions, the EE of two-way AF relaying and DT strategy outperform some of the DF relaying strategies. In simulations, the impact of different circuitry power and different channel conditions on the EE–SE curves are also investigated.     

SEPFL routing protocol based on fuzzy logic control to extend the lifetime and throughput of the wireless sensor network

In this paper a new protocol using fuzzy logic control has been proposed. The protocol is based on Stable Election Protocol (SEP). Fuzzy logic control based on three variables, distance of nodes form base station, density of nodes and the battery level of nodes along with the traditional threshold values used in SEP are used to enhance the process of cluster head election in the existing SEP protocol and improve the lifetime and throughput of the Wireless Sensor Network. The result of the simulation which has been done in MATLAB simulator indicates that Stable Election Protocol based on fuzzy logic is more energy efficient and improves the lifetime and throughput of the network by 73.2 and 68.54 % respectively comparing with the existing SEP protocol.     

UNICORE 6 — Recent and Future Advancements

UNICORE is a European Grid Technology with more than 10 years of history. Originating from the Supercomputing domain, the latest version UNICORE 6 has turned into a general-purpose Grid technology that follows established standards and offers a rich set of features to its users. The paper starts with an architectural insight into UNICORE 6, highlighting the workflow features, standards and the different clients. Next, the current state of advancement is presented by describing recent developments. The paper closes with an outlook on future planned developments.     

Lossless,Passive Transportation of Low Surface Tension Liquids Induced by Patterned Omniphobic Liquidlike Polymer Brushes

Surfaces enabling directional liquid transportation are of great interest for a wide range of applications such as water collection, microfluidics, and heat transfer systems. Surfaces capable of lossless, long-range passive transportation of low surface tension (LST) liquids using wettability patterned, liquidlike coatings with minimal contact angle hysteresis are reported. Lossless LST droplet travel distances over 150 mm are achieved, enabled by a two-phase transportation mechanism: morphological transformation from a bulge to a channel shape, followed by directional transportation along the asymmetrical wedge-shaped channel. The developed surfaces can split, merge, and precisely transport various low-surface tension liquids, including alcohols, alkanes, and solvents. The developed transportation strategy can also enhance LST liquid dropwise condensation through continuous removal of the condensate, even on horizontally positioned surfaces without the assistance of gravity.     

Adaptive double recycling folded cascode amplifier

Analog Integrated Circuits and Signal Processing - A new structure for improving the performance of recycling folded cascode (RFC) operational transconductance amplifier (OTA) is presented. The...