Crack Growth in Solid Oxide Fuel Cell Materials: From Discrete to Continuum Damage Modeling

This paper addresses the damage and fracture issues of glass and ceramic materials used in solid oxide fuel cells. Analyses of an internal crack and of an interface crack between dissimilar materials were conducted using a modified boundary layer modeling approach. In this approach, fracture is allowed to occur in a small process window situated at an initial crack tip. Elastic displacement crack-tip fields are prescribed as remote boundary conditions. Crack propagation was first modeled discretely. Next, a continuum damage mechanics (CDM) model for brittle materials was developed to capture damage and crack growth in the process window. In particular, the damage model was applied to a glass-ceramic material that had been developed in-house for sealing purposes. Discrete and continuum damage solutions were then compared. Finally, the CDM model was used to determine the crack propagation direction as a function of a mode mixity measure.     

Water-soluble Copolymers of N-vinylpyrrolidone and Vinyl Acetate: Synthesis, Characterization, and Monomer Reactivity at High Conversions

Homogeneous copolymers of N-vinylpyrrolidone (VP) and vinyl acetate (VA) which form clear aqueous solutions were prepared by free radical polymerization in a solution of isopropanol alcohol, using 2,2-azobisisobutyronitrile as an initiator. They were characterized by FTIR, ¹H-NMR, and element analysis studies. The reactivity ratios of the monomer were computed by the Extended Kelen–Tüdós method at high conversions, using data from both ¹H-NMR and elemental analysis studies. The reactivity ratios of VP and VA in a homogenous copolymer were observed to be very different from that of a heterogeneous copolymer. Additional information was obtained by finding out the sequence length distribution for copolymers.     

A 60‐GHz on‐chip slot‐array antenna in integrated‐passive‐device technology for antenna‐in‐package applications

A new millimeter‐wave antenna structure on a low‐cost, production platform integrated passive device technology is presented. The antenna consists of a 2‐by‐1 array of slot antennas at 60 GHz. An in‐house developed on‐chip antenna measurement setup was used to characterize the fabricated antenna. The measurement results show an antenna gain of more than 5 dBi with a return loss of 18 dB at 60 GHz. The better‐than‐10‐dB impedance bandwidth of the antenna covers the 60‐GHz unlicensed band from 57 to 64 GHz. The 3‐dB beamwidths of the antenna are 105° and 76° at E‐plane and H‐plane at 60 GHz, respectively. The size of the die of the antenna is 2 mm × 4.5 mm. © 2013 Wiley Periodicals, Inc. Int J RF and Microwave CAE 24:155–160, 2014.     

Low‐velocity impact of nanocomposite and polymer plates

Nanocomposites are more widely studied today because of higher stiffness, decreased permeability, thermal stability, and many other properties superior to those of regular polymers. However, manufacturers are concerned about implementing nanocomposites because of their lower impact properties with respect to the base polymer. This study focused on low‐velocity impact tests of a thermoplastic olefin by itself and with 5 wt % nanoclay. The impact tests were conducted at ?40, 23.9, and 65.6°C until the polymer and nanocomposite plates experienced complete striker penetration. The force–time and force–deflection responses obtained from the impact testing provided a means of comparing the impact performances of the two materials. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci 96: 2309–2315, 2005     

Linear principal transformation: toward locating features in N-dimensional image space

Projection Functions have been widely used for facial feature extraction and optical/handwritten character recognition due to their simplicity and efficiency. Because these transformations are not one-to-one, they may result in mapping distinct points into one point, and consequently losing detailed information. Here, we solve this problem by defining an N-dimensional space to represent a single image. Then, we propose a one-to-one transformation in this new image space. The proposed method, which we referred to as Linear Principal Transformation (LPT), utilizes Eigen analysis to extract the vector with the highest Eigenvalue. Afterwards, extrema in this vector were analyzed to extract the features of interest. In order to evaluate the proposed method, we performed two sets of experiments on facial feature extraction and optical character recognition in three different data sets. The results show that the proposed algorithm outperforms the observed algorithms in the paper and achieves accuracy from 1.4 % up to 14 %, while it has a comparable time complexity and efficiency.     

Desalination in the gaza strip: drinking water supply and environmental impact

More than 90% of the population of the Gaza Strip depends on desalinated water for drinking purposes. About 90% of the groundwater is unacceptable for drinking as a result of contamination by nitrate and chloride. One of the major options for resolving the water problems is the utilization of desalination technology for both sea and brackish water. The objective of this article is to address desalination water management in its embryonic stage in the Gaza Strip. The sources of drinking water supply, distribution system and the environmental impact of brine water will be fingered in detail. Desalination facilities range from large seawater plants to small brackish desalination units on a home scale. Governmental, non-governmental and private desalination plants are common. The distribution system of desalinated water is a responsibility of governmental, non-governmental, private small community bodies and even individuals. Disposal of brine water is made either directly or indirectly into the sea, sewage system, poor land, channels, wadies, etc. Brine constituents have an adverse impacton the surrounding environment, e.g., sea life, soil, wastewater treatment plants and the groundwateraquifer. The lack of real environmental impact assessments, especially for mid- and home-scale units may lead to a deterioration of the environment. The fragmentation of the responsibilities of water desalination, distribution of desalinated water and the disposal of brine water suggest that urgent action should be taken (e.g., legislation or establishment of a supervisory body). In other words, strict policies and management actions are to be taken in order to alleviate the health and environmental impact of an important and uncontrolled new system.     

Design of explicit model predictive control for constrained linear systems with disturbances

On-line model predictive control approaches require the online solution of an optimization problem. In contrast, the explicit model predictive control moves major part of computation offline. Therefore, eMPC enables one to implement a MPC in real time for wide range of fast systems. The eMPC approach requires the exact system model and results a piecewise affine control law defined on a polyhedral partition in the state space. As an important limitation, disturbances may reduce performance of the explicit model predictive control. This paper presents efficient approach for handling the problem of using eMPC for constrained systems with disturbances. It proposes an approach to improve performance of the closed loop system by designing a suitable state and disturbance estimator. Conditions for observability of the disturbances are considered and it is depicted that applying the disturbance’s estimation leads to rejection of the response error. It is also shown that the proposed approach prevents the reduction of feasible space. Simulation results illustrate the advantages of this approach.     

Alternating active-phase algorithm for multimaterial topology optimization problems: a 115-line MATLAB implementation

Structural and Multidisciplinary Optimization - A new algorithm for the solution of multimaterial topology optimization problems is introduced in the present study. The presented method is based on...     

Buoyancy effects on gaseous slip flow in a vertical rectangular microchannel

Consideration is given to the buoyancy effects on the fully developed gaseous slip flow in a vertical rectangular microduct. Two different cases of the thermal boundary conditions are considered, namely uniform temperature at two facing duct walls with different temperatures and adiabatic other walls (case A) and uniform heat flux at two walls and uniform temperature at other walls (case B). The rarefaction effects are treated using the first-order slip boundary conditions. By means of finite Fourier transform method, analytical solutions are obtained for the velocity and temperature distributions as well as the Poiseuille number. Furthermore, the threshold value of the mixed convection parameter to start the flow reversal is evaluated. The results show that the Poiseuille number of case A is an increasing function of the mixed convection parameter and a decreasing function of the channel aspect ratio, whereas its functionality on the Knudsen number is not monotonic. For case B, the Poiseuille number is decreased by increasing each of the mixed convection parameter, the Knudsen number, and the channel aspect ratio.     

Study of the High‐Pressure Vapour‐Liquid Equilibria for Strongly Non‐ideal Binary and Ternary Mixtures

High‐pressure vapour‐liquid equilibria for binary and ternary high polar and asymmetric systems are calculated using the Peng‐Robinson‐Stryjek‐Vera equation of state coupled with the Twu‐Coon (TWMR), the Orbey‐Sandler (OSMR) and the Wong‐Sandler (WSMR) mixing rules. Modified UNIFAC model is used for determining the activity coefficient and excess Gibbs free energy. The calculated results are compared with the experimental data and good agreement is observed. The average absolute deviation percents (AAD%)s indicated that the WSMR has less AAD% than other mixing rules in most of cases.