Heat Transfer Coefficient for a Packed Bed of Shredded Materials at Low Peclet Numbers

The application of the Nusselt number (Nu) correlation of a packed bed of spherical particles overestimates the rate of heat transfer in the packed beds of shredded materials. This is due to the dependence of flow distribution on the particle geometry. This discrepancy is even more pronounced due to a channeling effect at low Peclet numbers (Pe). In this study, the heat transfer coefficient for a packed bed of shredded materials was derived at low Peclet numbers. In deriving the correlation, both numerical simulation and experimental work were employed. The experimental work was carried out in a packed bed of combustible materials for the flow rates of 15 × 10^{? 6} to 50 × 10^{? 6} m ³/s and a temperature range of 30 to 60°C. Using the results of experimental work along with numerical modeling and applying a power law formulation, the best-fit Nusselt number for the packed bed of shredded materials for Pe < 25 was derived to be Nu = 0.015 0.11 + Pe ^0.73 . The Nusselt number calculated from this correlation is in good agreement with the experimental data.     

Reuse of waste sludge from papermaking process in cement composites

Papermaking sludge (PS), a waste residue from the pulp and paper processing, has brought great pressure on the environment because of large quantities that are produced in paper mills. This work was carried out to explore the possibility of making PS/cement composite products using solid waste of PS. Boards measuring 350 × 270 × 12 mm³ were manufactured using PS contents of 40, 50, and 60 wt%, adhesive dosages of 0, 10, and 15 wt%, and 0 and 5 wt% of calcium chloride as an accelerator. At least three replications were fabricated for each treatment, and some mechanical and physical properties of the boards were evaluated. Test results showed that the bending and internal strengths of the specimens decreased with an increase in the PS content, and the maximum values were obtained at PS loading of 40 wt%. The negative influence of PS content on the mechanical properties can be explained by the reduced bonding ability because of weaker PS compared with cement. Screw withdrawal values were up to 22.7 kPa. Water absorption and thickness swelling of cement mortar considerably increased with increased content of PS, with a corresponding reduction of bulk density. In general, all properties of the boards were improved when the adhesive and calcium chloride contents were increased. The results showed that an increase in board density improved the mechanical and physical properties. Finally, results showed that PS has good potential for recycling and utilization in developing value‐added building components. POLYM. ENG. SCI., 2013. © 2012 Society of Plastics Engineers     

Inhibitory effect of magnetic iron‐oxide nanoparticles on the pattern of expression of lanosterol 14α ‐demethylase (ERG11) in fluconazole‐resistant colonising isolate of Candida albicans

Fluconazole‐resistant Candida albicans is a big scary reality. The authors assessed the antifungal effects of magnetic iron‐oxide nanoparticles on fluconazole‐resistant colonising isolate of C. albicans and determined the expression of ERG11 gene, protein sequence similarity and ergosterol content. C. albicans isolates were characterised and fluconazole resistance is recognised using World Health Organization''s WHONET software. Susceptibility testing of magnetic iron‐oxide nanoparticles against fluconazole‐resistant colonising isolate of C. albicans was performed according to Clinical and Laboratory Standards Institute guidelines. The expression patterns of ERG11 and protein sequence similarity were investigated. Ergosterol quantification has been used to gauge the antifungal activity of magnetic iron‐oxide nanoparticles. The findings indicated that 93% of C. albicans isolates were resistant to fluconazole. Magnetic iron‐oxide nanoparticles were presented activity against fluconazole‐resistant colonising isolate of C. albicans with minimum inhibitory concentration at 250–500 µg/ml. The expression level of ERG11 gene was downregulated in fluconazole‐resistant colonising isolate of C. albicans. The results revealed no differences in fluconazole‐resistant colonising isolate of C. albicans by comparison with ERG11 reference sequences. Moreover, significant reduction was noted in ergosterol content. The findings shed a novel light on the application of magnetic iron‐oxide nanoparticles in fighting against resistant C. albicans.Inspec keywords: microorganisms, biochemistry, molecular biophysics, antibacterial activity, iron compounds, proteins, cellular biophysics, nanoparticles, drugs, geneticsOther keywords: albicans isolates, magnetic iron‐oxide nanoparticles, fluconazole‐resistant colonising isolate, fluconazole resistance, ERG11, candida albicans, protein sequence similarity, ergosterol content, WHONET, ergosterol quantification, susceptibility testing, antifungal activity, gene expression     

The effects of boron additions on the microstructure,hardness and tensile properties of in situ Al–15%Mg2Si composite

In this work the influences of Boron (B) content on the microstructure, hardness and mechanical properties of Al–15%Mg₂Si composite were investigated. The results showed that with the increase of B content, the average size of primary Mg₂Si particles decreased from ∼23 to ∼5 μm and the volume fraction of them decreased too, but the amount of alpha phase increased. It was found that with the addition of 0.3%B, the ultimate tensile strength (UTS) and elongation values reached from 252 to 273 MPa and 2.2% to 3.7%, respectively. It was revealed from hardness tests that B decreases the hardness values of the composite. Also, a small amount of Boride compounds formed as a result of the addition of B, which were the main reason of the decreasing of tensile properties at samples with high B.     

Synthesis and characterization of polycaprolactone/acrylic acid (PCL/AA) hydrogel for controlled drug delivery

In the present work biodegradable pH-sensitive polycaprolactone/acrylic acid (PCL/AA) hydrogels have been developed using ethylene glycol dimethacrylate (EGDMA) as a cross-linker and benzoyl peroxide as initiator. For these prepared hydrogels swelling studies, sol-gel fraction analysis and porosity measurements were performed. Results show that swelling of the hydrogels decreases on increasing the concentration of PCL and EGDMA, however swelling of hydrogels increases on increasing the concentration of AA. Results of sol-gel fraction analysis show that gel fraction increases on increasing concentration of monomer AA, polymer PCL as well as cross-linker EGDMA. As far as porosity is concerned, it increases on increasing the concentration of AA and PCL while porosity decreases on increasing the concentration of EGDMA. Hydrogels were characterized by measuring diffusion coefficient (D) and equilibrium water content (EWC). Network formation, morphology and crystallinity of PCL/AA hydrogels were investigated using FTIR, SEM and XRD, respectively. Tramadol hydrochloride was loaded as model drug and its release pattern was analysed using various kinetic models like zero order, first order, Higuchi and Peppas. Results indicated that most of the samples followed non-Fickian release mechanism.     

Evaluation of the oxidation and Cr evaporation properties of selected FeCr alloys used as SOFC interconnects

In recent years, a number of ferritic interconnect materials for use in solid oxide fuel cells (SOFC) have been developed and are now commercially available. Although similar, there are substantial variations in minor alloying elements. This study compares the oxidation performance of five such interconnect materials: Crofer 22 H, Crofer 22 APU (ThyssenKrupp VDM), Sanergy HT (Sandvik Materials Technology), ZMG232 G10 (Hitachi Metals) and E-Brite (ATI Allegheny Ludlum).     

Normal and Anomalous Codeposition of Ni-Co-Fe-Zn Alloys from EMIC/EG in the Presence of an External Magnetic Field

The codeposition of Ni-Co-Fe-Zn alloys from a mixture of 1-ethyl-3-methylimidazolium chloride (EMIC)/ethylene glycol (EG) was studied using potentiostatic electrodeposition in the potential range of –1.10 and –1.30 V vs saturated calomel electrode (SCE), using a permanent parallel magnetic field (PPMF) of 9 T. The uniform magnetic field was aligned parallel to the cathode surface. It was found that both normal and anomalous codeposition occurred. Films with different elemental percentage and deposit morphology were obtained from a mixture of EMIC/EG solution at the applied potentials (–1.10 and –1.30 V) in the absence and presence of a PPMF. The influence of magnetic field on the nucleation and growth process is studied with respect to the magneto-hydrodynamic effect (MHD) and applied potentials.     

Optimal actuation of nonlinear resonant systems

In this study, we examine a new approach for actuation of dynamical systems with minimum work and maximum amplitude while maintaining constraints on the actuation force. Two methodology issues are addressed in the paper: sensitivity analysis about the nonlinear transient response and exploration of the strongly nonlinear relationship between the two objectives and the actuation design variables. The optimization analysis is carried out on lightly damped Duffing systems. The formulation of the optimization problem is found ideally suited to resolve the difficulty of dependence of response on initial conditions. The tradeoff curve of work and amplitude is computed. The optimal actuation strove to compensate for the limited force amplitude by an abrupt change in the force in time. Finally the optimization procedure is demonstrated on the kinematic design of hovering insect flight. The optimal design gives 50% reduction in power consumption, with a larger cutback for an actuation with high acceleration.     

Pd-doped Co nanofibers immobilized on a chemically stable metallic bipolar plate as novel strategy for direct formic acid fuel cells

High contact resistance and corrosion are the main dilemma facing wide application of the metallic bipolar plates. In this study, deposition of thin film from Pd-decorated Co nanofibers on a silicon substrate is introduced as a novel strategy to produce functionalized metallic bipolar plate. The novel active metallic bipolar plate can be prepared by using simple, low cost, high yield and effective technique; electrospinning. The bimetallic nanofibrous film chemically bonds with the silicon substrate due to formation of silicon carbide which leads to merge the deeper nanofibers with the silicon surface. Accordingly, high current density (100 mA cm⁻¹) was obtained when the introduced covered silicon wafer was utilized as anode catalyst for formic acid electrooxidation. Because the bimetallic nanofibers are sheathed in a thin graphite shell, the introduced active bipolar plate reveals very good stability. Overall, the introduced study is opening a new avenue to prepare new class of functionalized metallic bipolar plates.     

Development and Use of Quantitative Competitive PCR Assay for Detection of Poultry DNA in Sausage

This study focused on the development and evaluation of a quantitative competitive polymerase chain reaction (QC-PCR) for detection and quantification of poultry DNA in sausage. PCR is well known to be quantitative if internal DNA standards are co-amplified together with the target DNA. A DNA competitor differing by 83 bp in length from the poultry target sequence was constructed and used for PCR together with the target DNA. Specificity of the new primers was evaluated with DNA from cattle and sheep. The results of QC-PCR showed that the percentage of contamination was in the range of 23.87–52.06%.