Physical design of the VCI wrappers for the on-chip packet-switched network named SPIN

This paper presents the physical design methodology of the VCI/SPIN wrappers. The challenge was the validation of the wrappers’ specification with Alliance CAD Tools.A wrapper is a standard gateway used by a subscriber to access an interconnect. Because there are as many wrappers as subscribers, it is relevant to have an estimation of the wrapper’s area, its frequency and then compare these results to the router’s.The interest to perform this study with academic tools is to show that commercial tools are not the unique way for experimentations.     

A rule-based approach for robust clump splitting

This paper presents a robust rule-based approach for the splitting of binary clumps that are formed by objects of diverse shapes and sizes. First, the deepest boundary pixels, i.e., the concavity pixels in a clump, are detected using a fast and accurate scheme. Next, concavity-based rules are applied to generate the candidate split lines that join pairs of concavity pixels. A figure of merit is used to determine the best split line from the set of candidate lines. Experimental results show that the proposed approach is robust and accurate.     

Window materials for high power gyrotron

The room temperature application of sapphire as window material at higher frequencies is not feasible since its absorption coefficient increases almost linearly with increasing frequency in the millimeter wavelength region. At cryogenic temperature the absorption coefficient value decreases only by a few factors (factor of 2 to 3) in the 90 – 200 GHz region. The earlier reported temperature squared dependence (decrease) in the absorption coefficient or the loss tangent value is totally absent in our broad band continuous wave data we are reporting here (at 6.5 K, 35K, 77K and 300K) and one we reported at conferences earlier. Our results are verified by another technique. We utilize our precision millimeter wave dispersive Fourier transform spectroscopic techniques at room temperature and at cryogenic temperatures The extra high resistivity single crystal compensated silicon is no doubt the lowest loss material available at room temperature in the entire millimeter wavelength region At higher millimeter wave frequencies an extra high resistivity silicon window or an window made with extra high resistivity silicon coated with diamond film would certainly make a better candidate in the future. A single free standing synthetic diamond window seems to have higher absorption coefficient values at millimeter wavelength region at this time although it is claimed that it possesses good mechanical strength and higher thermal conductivity characteristics. It certainly does not rule out the use of diamond film on a single crystal high resistivity silicon to improve its mechanical strength and thermal conductivity     

ID-based threshold decryption secure against adaptive chosen-ciphertext attack

This paper proposes an identity-based threshold decryption scheme IB-ThDec and reduces its security to the Bilinear Diffie-Hellman problem. Compared with previous work, this conceals two pairing computations in the ciphertext validity verification procedure. The formal proof of security of this scheme is provided in the random oracle model. Additionally, we show that IB-ThDec can be applied to the threshold key escrow and the mediated cryptosystems.     

A region-based selective optical flow back-projection for genuine motion vector estimation

Motion vector plays one significant feature in moving object segmentation. However, the motion vector in this application is required to represent the actual motion displacement, rather than regions of visually significant similarity. In this paper, region-based selective optical flow back-projection (RSOFB) which back-projects optical flows in a region to restore the region's motion vector from gradient-based optical flows, is proposed to obtain genuine motion displacement. The back-projection is performed based on minimizing the projection mean square errors of the motion vector on gradient directions. As optical flows of various magnitudes and directions provide various degrees of reliability in the genuine motion restoration, the optical flows to be used in the RSOFB are optimally selected based on their sensitivity to noises and their tendency in causing motion estimation errors. In this paper a deterministic solution is also derived for performing the minimization and obtaining the genuine motion magnitude and motion direction.     

Fast, large-scale model predictive control by partial enumeration

Partial enumeration (PE) is presented as a method for treating large, linear model predictive control applications that are out of reach with available MPC methods. PE uses both a table storage method and online optimization to achieve this goal. Versions of PE are shown to be closed-loop stable. PE is applied to an industrial example with more than 250 states, 32 inputs, and a 25-sample control horizon. The performance is less than 0.01% suboptimal, with average speedup factors in the range of 80-220, and worst-case speedups in the range of 4.9-39.2, compared to an existing MPC method. Small tables with only 25-200 entries were used to obtain this performance, while full enumeration is intractable for this example.     

Cubic Bézier approximation of a digitized curve

In this paper we present an efficient technique for piecewise cubic Bézier approximation of digitized curve. An adaptive breakpoint detection method divides a digital curve into a number of segments and each segment is approximated by a cubic Bézier curve so that the approximation error is minimized. Initial approximated Bézier control points for each of the segments are obtained by interpolation technique i.e. by the reverse recursion of De Castaljau's algorithm. Two methods, two-dimensional logarithmic search algorithm (TDLSA) and an evolutionary search algorithm (ESA), are introduced to find the best-fit Bézier control points from the approximate interpolated control points. ESA based refinement is proved to be better experimentally. Experimental results show that Bézier approximation of a digitized curve is much more accurate and uses less number of points compared to other approximation techniques.     

Target differentiation with simple infrared sensors using statistical pattern recognition techniques

This study compares the performances of various statistical pattern recognition techniques for the differentiation of commonly encountered features in indoor environments, possibly with different surface properties, using simple infrared (IR) sensors. The intensity measurements obtained from such sensors are highly dependent on the location, geometry, and surface properties of the reflecting feature in a way that cannot be represented by a simple analytical relationship, therefore complicating the differentiation process. We construct feature vectors based on the parameters of angular IR intensity scans from different targets to determine their geometry and/or surface type. Mixture of normals classifier with three components correctly differentiates three types of geometries with different surface properties, resulting in the best performance (100%) in geometry differentiation. Parametric differentiation correctly identifies six different surface types of the same planar geometry, resulting in the best surface differentiation rate (100%). However, this rate is not maintained with the inclusion of more surfaces. The results indicate that the geometrical properties of the targets are more distinctive than their surface properties, and surface recognition is the limiting factor in differentiation. The results demonstrate that simple IR sensors, when coupled with appropriate processing and recognition techniques, can be used to extract substantially more information than such devices are commonly employed for.     

MC-CDMA with exponential power profile in Nakagami fading channel

A refined study of multi-carrier code division multiple access transmission over a Nakagami fading channel is proposed. The channel power is modeled with an exponential power profile rather than the uniform profile prevalent in other papers. An expression for the bit error rate (BER) is then derived. Numerical results show that MC-CDMA performances depend on the power dispersion of interferers around the desired user power.     

Subspace identification of MIMO LPV systems using a periodic scheduling sequence

A novel subspace identification method is presented which is able to reconstruct the deterministic part of a multivariable state-space LPV system with affine parameter dependence, in the presence of process and output noise. It is assumed that the identification data is generated with the scheduling variable varying periodically during the course of the identification experiment. This allows to use methods from LTI subspace identification to determine the column space of the time-varying observability matrices. It is shown that the crucial step in determining the original LPV system is to ensure the obtained observability matrices are defined with respect to the same state basis. Once the LPV model has been identified, it is valid for other nonperiodic scheduling sequences as well.