Influence of <Emphasis Type="Italic">Cissus quadrangularis</Emphasis> Stabilized AgNPs and Its Structural,Optical, Antibacterial Analysis: A Comparative Study

Silver nanoparticles (AgNPs) was synthesized by using AgCl precursor with the stabilizing agent Cissus quadrangularis by precipitation method and the obtained particles were characterized by X-ray diffraction (XRD) analysis, Field Emission Scanning Electron Microscope (FESEM) and UV–Visible (UV–Vis) analysis. The influence of a stabilizing agent on AgNPs was compared with non-stabilized AgNPs through the experimental analysis. The XRD patterns show pure face center cubic structure for both samples, whereas the crystallite size is found to be low in stabilizer used samples. FESEM image and the UV–Vis spectra show less agglomeration and blue shift respectively, for stabilizer used AgNPs, indicating small size particles. Photoluminescence spectra show the emission band at 390 nm for both samples. Antibacterial tests show good activity against Pseudomonas aeruginosa for stabilizer used AgNPs. The study concluded that Cissus quadrangularis can be used as a potential stabilizing agent for preparing AgNPs from AgCl, for optical and biomedical applications.     

Biocomposite based electrode for effective removal of Cr (VI) heavy metal via capacitive deionization

Abstract

This study focuses on the fabrication of biocomposite electrode and removal of Cr (VI) ions from wastewater using a capacitive deionization (CDI) method. The activated carbon (AC) was synthesized from Bael fruit shell (BS). The synthesized AC surface has a macroporous and mesoporous structure with the large specific surface area (617.72?m² g^?1) and high adsorption capacity. The cyclic voltammetry and CDI were performed for the detection and for the removal of chromium (VI) ions, respectively. The lower level of detection of Cr (VI) by a modified electrode was found to be 10 ppt. SEM, BET, and FTIR analyses were performed to explore the surface properties of electrode materials. The removal efficiency was achieved 100% by using biocomposite electrode with an applied potential of 15?V. The highest percent removal mechanism consists of electrosorption and electroreduction due to the affinity between polyvinyl alcohol modified electrode and Cr (VI) ions, under electrochemically faradic process.     

Improved gas holdup in novel bubble column

This investigation reports the experimental and theoretical results carried out to evaluate the gas holdup for air–water system in a novel hybrid rotating and reciprocating perforated plate bubble column under countercurrent condition. The response of this hybrid column is found to be similar to that of reciprocating plate column (RPC) showing mixer‐settler, transition, and emulsion regions. The effect of agitation level, superficial gas velocity, superficial liquid velocity, perforation diameter, and plate spacing on gas holdup is studied and found to be significant. The gas holdup is found to be least in the range of agitation level of 1.3–1.5 cm/s. For all the superficial gas and liquid velocities considered in this present investigation, the critical agitation level at minimum gas holdup remains nearly same. The gas holdup in this hybrid column is 1.2–1.7 times higher in mixer‐settler region and 2.1–2.7 times higher in emulsion region than that of RPC. Correlations have been developed and found to concur with the experimental values. It can be used with 95% accuracy. © 2011 Canadian Society for Chemical Engineering     

Preparation and characterization of camptothecin-loaded alginate/poly[N-(2-hydroxypropyl) methacrylamide] hydrogel beads for anticancer treatment

Encapsulation of poor water-soluble drugs into a biocompatible polymeric matrix is a good strategy for in vitro drug delivery. Present study deals with the preparation and optimization of alginate/poly[N-(2-hydroxypropyl) methacrylamide] beads (SA/pHPMA) for the delivery of an anticancer drug such as camptothecin (CPT). Beads were prepared by ionotropic gelation technique using calcium chloride and optimized concentrations of 10?w/v% of sodium alginate beads and 10:10?w/v% of poly[N-(2-hydroxypropyl) methacrylamide]:sodium alginate (SA/pHPMA) beads were prepared. Twenty ppm of CPT was incorporated into the beads by the imbibition method. XRD, thermogravimetric analysis, and differential scanning calorimetry studies of the beads showed no free pHPMA and CPT indicating their uniform dispersion into the matrix. FTIR analysis showed weak interaction between CPT and polymers. In vitro release of CPT from SA/pHPMA beads showed slow and sustained release of 80% while SA beads showed 62% retaining the shape of the beads in phosphate-buffered saline at pH 7.4. The presence of CPT inside the prepared beads has the potential to be used as soft bandages for treatment of cancer.     

Strength of synaptic transmission at neuromuscular junctions of crustaceans and insects in relation to calcium entry

Crustacean and insect neuromuscular junctions typically include numerous small synapses, each of which usually contains one or more active zones, which possess voltage-sensitive calcium channels and are specialized for release of synaptic vesicles. Strength of transmission (the number of quantal units released per synapse by a nerve impulse) varies greatly among different endings of individual neurons, and from one neuron to another. Ultrastructural features of synapses account for some of the physiological differences at endings of individual neurons. The nerve terminals that release more neurotransmitter per impulse have a higher incidence of synapses with more than one active zone, and this is correlated with more calcium build-up during stimulation. However, comparison of synaptic structure in neurons with different physiological phenotypes indicates no major differences in structure that could account for their different levels of neurotransmitter release per impulse, and release per synapse differs among neurons despite similar calcium build-up in their terminals during stimulation. The evidence indicates differences in calcium sensitivity of the release process among neurons as an aspect of physiological specialization.     

Phytosynthesized iron oxide nanoparticles and ferrous iron on fermentative hydrogen production using Enterobacter cloacae: Evaluation and comparison of the effects

The effects of FeSO₄ and synthesized iron oxide nanoparticles (0–250 mg/L) on fermentative hydrogen production from glucose and sucrose, using Enterobacter cloacae were investigated, to find out the enhancement of efficiency. The maximum hydrogen yields of 1.7 ± 0.017 mol H₂/mol glucose and 5.19 ± 0.12 mol H₂/mol sucrose were obtained with 25 mg/L of ferrous iron supplementation. In comparison, the maximum hydrogen yields of 2.07 ± 0.07 mol H₂/mol glucose and 5.44 ± 0.27 mol H₂/mol sucrose were achieved with 125 mg/L and 200 mg/L of iron oxide nanoparticles, respectively. These results indicate that the enhancement of hydrogen production on the supplementation of iron oxide nanoparticles was found to be considerably higher than that of ferrous iron supplementation. The activity of E. cloacae in a glucose and sucrose fed systems was increased by the addition of iron oxide nanoparticles, but the metabolic pathway was not changed. The results revealed that the glucose and sucrose fed systems conformed to the acetate/butyrate fermentation type.     

A review on recent developments in new refrigerant mixtures for vapour compression‐based refrigeration,air‐conditioning and heat pump units

In the present paper, an attempt has been made to review the performance of new refrigerant mixtures employed in vapour compression‐based refrigeration, air‐conditioning and heat pump units. The studies reported with refrigerant mixtures are categorized into six groups as follows: (i) hydrocarbon (HC), (ii) hydroflurocarbons (HFC), (iii) HFC/HC, (iv) hydrochloroflurocarbons (HCFC), (v) carbon dioxide (R744) and (vi) ammonia (R717). This paper explores the studies reported with new refrigerant mixtures in domestic refrigerators, commercial refrigeration systems, air conditioners, heat pumps, chillers and in automobile air conditioners. In addition, the technical difficulties faced with new refrigerant mixtures, further research needs in this field and future refrigerant options for new upcoming systems have been discussed in detail. This paper concludes that HC based refrigerant mixtures are identified as a long‐term alternative to phase out the existing halogenated refrigerants in the vapour compression‐based systems. Copyright © 2010 John Wiley & Sons, Ltd.     

Comparative assessment of environment-friendly alternatives to R134a in domestic refrigerators

In the present work, the possibility of using R152a and hydrocarbon refrigerants (such as R290, R1270, R600a, and R600) as alternatives to R134a in domestic refrigerators has been assessed theoretically. The refrigerants are assessed over wider range condensing and evaporator temperatures. The assessment was done with standard parameters such as pressure ratio, volumetric cooling capacity (VCC), coefficient of performance (COP), compressor input power, compressor discharge temperature, and total equivalent warming impact (TEWI). The results obtained showed that pure hydrocarbon refrigerants are not suitable to be used as alternatives to R134a due to its mismatch in VCC. R152a has approximately the same VCC with about 9% higher COP and lower values of operating pressure and compressor input power. The discharge temperature of R152a was higher than that of R134a by about 14–26 K. TEWI of R152a was about 7% lower than that of R134a. The reported results proved that R152a is an energy-efficient and environment-friendly alternative to phase out R134a in domestic refrigerators.