Dynamic hybrid automatic repeat request (DHARQ) for WiMAX – Mobile multihop relay using adaptive power control

Wireless multihop network is currently attracting much attention as a new wireless broadband access technology due to numerous benefits. This work proposes a power control scheme for WiMAX multihop relay system. In contrast to existing power control and optimization approaches, our proposed method uses an adaptive Channel Quality Measurement for a relay station to reduce interferences to other mobile station (MS) or relay station (RS) within the same cell and hence increase the number of hops per link and consequently maximize the spatial reuse. The proposed power control is applied to a new dynamic HARQ algorithm for adaptive channel quality enhancement. Simulation results have indicated that the proposed approach achieves superior BER/PER performance enhancement in comparison to previous related works.     

Leader-follower consensus control of Lipschitz nonlinear systems by output feedback

This paper deals with the leader-follower consensus problem of Lipschitz nonlinear systems under fixed directed communication networks. Both state and output feedback control are proposed based on state and output measurements of neighbouring agents, respectively. Laplacian matrix features are explored for the stability analysis, and the sufficient conditions are derived to solve the consensus problem. Finally, simulation results are included to demonstrate the effectiveness of the output-based consensus controller.     

The design and development of suspended handles for reducing hand-arm vibration in petrol driven grass trimmer

The portable petrol driven grass trimmer is identified as a type of machine whose operator can be subjected to large magnitude of hand-arm vibration. These vibrations can cause complex vascular, neurological and musculoskeletal disorder, collectively named as hand-arm vibration syndrome. The vibration total level on the handle of grass trimmer of 11.30 m/s² was measured, and it has reached the exposure limit value of 5.0 m/s² for daily vibration exposure A(8). New suspended handles were designed to reduce the vibration level. Three different prototype handles with rubber mounts were designed. Handles were made of different materials, and the distance of rubber mounts were varied. From the study, it was observed that not all the handles with rubber mounts were effective in reducing hand-arm vibration. The reduction of vibration depended on the handle material and distance installed between rubber mount and vibration transmissibility of handle-isolation system. Subjective ratings of perception of vibration were measured, and the results indicated that operators were not fully aware of the level of vibration. A prototype handle that is made of heavier material results in the lowest hand-arm vibration of 2.69 m/s². The new handle has significantly reduced the vibration total value by 76% compare with the existing commercial handle.

Relevance to industry

Large numbers of workers are employed to perform grass trimming job in many developing countries. This paper presents the effect of handle types (commercial and prototype) on the commonly used grass trimmer.     

Genetic Algorithm and Simulated Annealing to estimate optimal process parameters of the abrasive waterjet machining

In this study, two computational approaches, Genetic Algorithm and Simulated Annealing, are applied to search for a set of optimal process parameters value that leads to the minimum value of machining performance. The objectives of the applied techniques are: (1) to estimate the minimum value of the machining performance compared to the machining performance value of the experimental data and regression modeling, (2) to estimate the optimal process parameters values that has to be within the range of the minimum and maximum coded values for process parameters of experimental design that are used for experimental trial and (3) to evaluate the number of iteration generated by the computational approaches that lead to the minimum value of machining performance. Set of the machining process parameters and machining performance considered in this work deal with the real experimental data of the non-conventional machining operation, abrasive waterjet. The results of this study showed that both of the computational approaches managed to estimate the optimal process parameters, leading to the minimum value of machining performance when compared to the result of real experimental data.     

GENOTOXICITY IN CHIRONOMUS KIIENSIS (CHIRONOMIDAE: DIPTERA) AFTER EXPOSURE TO POLLUTED SEDIMENTS FROM RIVERS OF NORTH PENINSULAR MALAYSIA: IMPLICATION FOR ECOTOXICOLOGICAL MONITORING

Rapid industrialization and urbanization has led to increasing input of chemical contaminants into the aquatic environment of Malaysia. Despite the threat civilization poses to the biota, there are still very few relevant studies on ecotoxicological testing of river ecosystems. To overcome this knowledge gap, we examined lethal and genotoxic effects of sediments from different rivers of the northern Malaysia against Chironomus kiiensis, a group well represented in the aquatic fauna of this region. We exposed the larvae to sediments from Selama River (SR), Permatang Rawa River (PRR) and Kilang Ubi River (KUR) at various durations (0, 6, 12, 24 and 48 h). The larval mortality was monitored, whereas DNA damage in survivors' cells was determined using the comet assay. Pollution level indexed by the amounts of heavy metals and other organic contaminants in the sediment showed progressive increases from SR to PRR to KUR. Highly polluted sediments (PRR to KUR) were detrimental to C. kiiensis larvae, most of which did not survive following exposure for long periods. DNA analyses revealed greater damages in nuclei derived from larvae maintained on polluted sediments, in particular, those from KUR. The effects on the genomic material of C. kiiensis larvae occurred in a time‐dependent manner, with damage level increasing as exposure time progressed. Our results highlight the genotoxic properties of polluted sediments. More importantly, this study showed that C. kiiensis larvae could respond to different levels of pollution with respect to exposure time. It is concluded that C. kiiensis larvae is a potential candidate for river ecotoxicological monitoring. Copyright © 2012 John Wiley & Sons, Ltd.     

Adsorptive performance of penta-bismuth hepta-oxide nitrate, Bi?O?NO?, for removal of methyl orange dye

The adsorption of methyl orange dye from aqueous solution onto penta-bismuth hepta-oxide nitrate, Bi(5)O(7)NO(3), synthesized by precipitation method, was studied in a batch adsorption system. The effects of operation parameters such as adsorbent dose, initial dye concentration, pH and temperature were investigated. The adsorption equilibrium and mechanism of adsorption was evaluated by Langmuir and Freundlich isotherm and different kinetic models, respectively. The results indicate that adsorption is highly dependent on all operation parameters. At optimum conditions, the adsorption capacity was found to be 18.9 mg/g. The adsorption data fits well with the Langmuir isotherm model indicating monolayer coverage of adsorbate molecules on the surface of Bi(5)O(7)NO(3). The kinetic studies show that the adsorption process is a second-order kinetic reaction. Although intra-particle diffusion limits the rate of adsorption, the multi-linearity plot of intra-particle model shows the importance of both film and intra-particle diffusion as the rate-limiting steps of the dye removal. Thermodynamic parameters show that the adsorption process is endothermic, spontaneous and favourable at high temperature.     

Location allocation modeling for healthcare facility planning in Malaysia

Malaysia has seen tremendous growth in the standard of living and household per capita income. The demand for a more systematic and efficient planning has become increasingly more important, one of the keys to achieving a high standard in healthcare. In this paper, a Maximal Covering Location Problem (MCLP) is used to study the healthcare facilities of one of the districts in Malaysia. We address the limited capacity of the facilities and the problem is formulated as Capacitated MCLP (CMCLP). We propose a new solution approach based on genetic algorithm to examine the percentage of coverage of the existing facilities within the allowable distance specified/targeted by Malaysian government. The algorithm was shown to generate good results when compared to results obtained using CPLEX version 12.2 on a medium size problem consisting of 179 nodes network. The algorithm was extended to solve larger network consisting of 809 nodes where CPLEX failed to produce non-trivial solutions. We show that the proposed solution approach produces significant results in determining good locations for the facility such that the population coverage is maximized.     

A method for real power transfer allocation using multivariable regression analysis

A multivariable regression (MVR) approach is proposed to identify the real power transfer between generators and loads. Based on solved load flow results, it first uses modified nodal equation method (MNE) to determine real power contribution from each generator to loads. Then, the results of MNE method and load flow information are utilized to determine suitable regression coefficients using MVR model to estimate the power transfer. The 25-bus equivalent system of south Malaysia is utilized as a test system to illustrate the effectiveness of the MVR output compared to that of the MNE method. The error of the estimate of MVR method ranges from 0.001 4 to 0.007 9. Furthermore, when compared to MNE method, MVR method computes generator contribution to loads within 26.40 ms whereas the MNE method takes 360 ms for the calculation of same real power transfer allocation. Therefore, MVR method is more suitable for real time power transfer allocation.     

Wear characteristics of commercial gas turbine components

Wear is one of the common degradations in a commercial gas turbine. A stainless steel grade 304 (SS 304) fuel nozzle and its collar made of nickel-based superalloy (Hastelloy X) are two vital components that normally suffer from rapid wear. During an installation, the fuel nozzle is slotted into the collar of the combustion liner. In operation, these two surfaces are subjected to high pressure from the fuel combustion, hence continuously rubbing against each other causes vibrations. During the start–stop operation, these surfaces had undergone a large relative motion. The vibration is the main cause of the wear occurrence on the surfaces. Physical properties of the worn surfaces were obtained through visual observations: wear measurement, hardness and microstructure examination. Through visual observations, fretting wear was mainly suspected as the dominant wear mode, particularly after 8,000 of running hours at high temperature and vibration. In short, this paper discusses the preliminary findings of wear on the fuel nozzle and its collar. It also discusses the changes in the mechanical properties before and after the operation. Solutions for mitigating the problem were discussed.     

Design of dual‐band microstrip patch antenna with right‐angle triangular aperture slot for energy transfer application

This work focusing on the dual‐band antenna design with rectifying circuit for energy transfer system technology for enhancement gain performance. The air gap technique is applied on this microstrip antenna design work to enhance the antenna gain. The work begins with designing and analyzing the antenna via the CST Microwave Studio software. After validation on acceptable performance in simulation side is obtained, the return loss, S₁₁ of the antenna is measured using vector network analyzer equipment. The rectifier circuit is used to convert the captured signal to DC voltage. This projected dual‐band antenna has successfully accomplished the target on return loss of ?44.707 dB and ?32.163 dB at dual resonant frequencies for 1.8 GHz and 2.4 GHz, respectively. This proposed antenna design benefits in low cost fabrication and has achieved high gain of 6.31 dBi and 7.82 dBi for dual‐band functioning frequencies.