Peak‐to‐average power ratio reduction and digital predistortion effects in power amplifiers in OFDM system

In this paper, the effects of peak‐to‐average power ratio reduction in nonlinear power amplifiers (PAs) by considering memory effects and of digital predistortion are investigated. A new predistortion technique is proposed, which is called the complex gain memory predistortion (CGMP) method. The CGMP is applied to compensate the dynamic memory effects of PAs. The conventional partial transmit sequence method is applied for peak‐to‐average power ratio reduction, and combining it with the CGMP results in efficiency enhancement and spectrum efficiency improvement. Simulation and results are examined with the two types of PAs and with an OFDM signal with quadrature phase‐shift keying modulation. Copyright © 2011 John Wiley & Sons, Ltd.     

Fabrication of oxide pellets containing lumped Gd2O3 using Y2O3‐stabilized ZrO2 for burnable absorber fuel applications

In this paper, the fabrication of novel burnable absorber fuel concepts with oxide pellets, containing either a lumped Gd₂O₃ rod, a mini‐pellet, or a spherical particle in the centerline of the oxide pellet, is investigated to propose the lumped Gd₂O₃ burnable absorber fuel concept to improve nuclear fuel performance with longer fuel cycle lengths and better fuel utilization. The unique characteristic of the lumped Gd₂O₃ burnable absorber fuel is its high spatial self‐shielding factor that reduces its burnout rate and, therefore, improves the reactivity control. Oxide pellets containing lumped Gd₂O₃ were fabricated by using a combination of cold isostatic pressing and microwave sintering at 1500°C to understand the potential technical issues in the fabrication of duplex burnable absorber fuel. The effect of the sintering temperature on the densification and phase transformation of 8 wt.% yttria‐stabilized zirconia, a surrogate for UO₂, was investigated. Spherical Gd₂O₃ particles were fabricated by the drip casting of a Gd₂O₃‐based Na alginate solution. The fabrication of duplex oxide pellets by using presintered Gd₂O₃ mini‐pellets resulted in internal cracks at the interface between the Gd₂O₃ and 8 wt.% yttria‐stabilized zirconia layers because of the mismatch of their densification. However, the formation of interfacial cracks was eliminated by controlling the initial sintered density of the lumped Gd₂O₃.     

High frequency response to the impedance complex properties of Nb-doped CaCu3Ti4O12 electroceramics

Impedance analyses was performed on undoped and Nb-doped CaCu₃Ti₄O₁₂ (CaCu₃Ti_4−xNb_xO_12+x/2; x = 0, 0.01, 0.03, 0.05, 0.1) to investigate their electrical properties. The pellet samples were prepared using the solid state reaction method. Silver electrode was deposited on both pellets’ surfaces for electrical measurement. The thermally etched samples showed tiny bumped domains within the grains. The existence of both domain and grain boundaries are believed to strongly influence the dielectric constant of CaCu₃Ti₄O₁₂ (CCTO). Undoped CCTO showed two arcs of impedance complex plane while Nb-doped samples have three arcs. Each arc represents the constituent elements of the CCTO. The highest frequency arc is evidence that CCTO consists of conductive domains which measure about 1 Ω and are insulated by two types of barriers, i.e. domain boundary and grain boundary.     

Double hinged articulated tower interaction with wind and waves

Articulated offshore towers are highly flexible against rotation at the hinges and derive their stability by means of inherently large buoyancy forces. The displacement response of such towers is mainly governed by the rigid body mode of vibration which has a very low frequency. Since the fluctuating wind velocity spectrum has high energy content in the low frequency region, therefore, wind induces significant dynamic response of such towers. In this paper, the responses of single and double hinged articulated towers are compared under various ocean environments. A Monte Carlo simulation technique is used to model the random sea environment. The sea state is characterized by Pierson–Moskowitz spectrum while the fluctuating wind has been estimated using Simiu's spectrum for compliant platforms. Iterative time domain solution procedure is adopted to take care of time dependent parameters and nonlinearities. Stochastic response is characterized by statistical quantities and power spectral density functions (PSDF) for various parametric combinations. Studies of wind effects are found to be imperative for double hinged articulated towers to serve and survive in the hostile offshore environment. The response PSDF highlights the wind induced dynamic responses of the towers.     

Development of a novel flexure-based microgripper for high precision micro-object manipulation

Micro-scaled parts with dimension below 1 mm need to be manipulated with high precision and consistency in order to guarantee successful microassembly process. Often these requirements are difficult to be achieved particularly due to the problems associated with the structural integrity of the grasping mechanism which will affect the accuracy of the manipulation. Furthermore, the object's texture and fragility imply that small perturbation by the grasping mechanism can result in substantial damage to the object and leads to the degradation of its geometry, shape, and quality. This paper focuses on the unification of two designing approaches to develop a compliant-based microgripper for performing high precision manipulation of micro-objects. A combination of Pseudo Rigid Body Model (PRBM) and Finite Element Analysis (FEA) technique has proven to improve the design efficiency by providing the essential guideline to expedite the prototyping procedure which effectively reduces the cost and modeling time. An Electro Discharge Machining (EDM) technique was utilized for the fabrication of the device. Series of experimental studies were conducted for performance verification and the results are compared with the computational analysis results. A high displacement amplification and maximum stroke of 100 μm can be achieved.     

A Robust Peak-to-Average Power Ratio Reduction Scheme by Inserting Dummy Signals with Enhanced Partial Transmit Sequence in OFDM Systems

Peak-to-average power ratio (PAPR) is one of the main drawbacks in orthogonal frequency division multiplexing (OFDM) systems. High PAPR forces the power amplifier to back off in order to operate in its linear region, which degrades the power efficiency of the system. Several PAPR reduction techniques have been developed, but most of them have not considered both complexity and PAPR reduction. In this paper, a novel PAPR reduction scheme based on the insertion of dummy sequences to an enhanced partial transmit sequence is proposed. By applying this scheme the PAPR performance is enhanced compared to the conventional methods while the complexity is significantly reduced. Numerical analysis is carried out with OFDM signal and QPSK modulation.     

The effect of polyvinyl alcohol addition on the physicochemical properties of ZnO synthesized by ethylene glycol-hydrothermal method

The effect of the addition of very small amount of polyvinyl alcohol (PVA) on the resulting physicochemical properties of ZnO synthesized by ethylene glycol-hydrothermal method was studied. Significant change in particle size distribution and specific surface area can be observed even only 0.02% PVA (w/w) was added into the ethylene glycol (EG) solution, in which the median particle size distribution increased from 5 to 8 nm and at the same time the specific surface area is also increased to nearly 50%. Further addition of PVA resulted in the decrease of the specific surface area due to the formation of agglomeration and aggregation of particles as observed by FESEM study. This study shows that the presence of minute amount of polymer, PVA plays very crucial role in determining the resulting properties of the synthesized ZnO by EG-hydrothermal method.     

DOE applied to multi-response optimisation study on performance,combustion and emission characteristics of a VCR diesel engine

There are various parameters which may influence the IC engine performance. The trial and error method is a technique used to identify the best parameters. However, this method demands extensive experimental work and results in a great waste of time and resources. Thus, the design of experiments (DOEs) developed by Taguchi is employed. The multi-responses which need to be maximised are brake thermal efficiency, mechanical efficiency, cylinder pressure and cumulative heat release rate, whereas the responses which are to be minimised are specific fuel consumption, oxides of nitrogen and carbon monoxide. In the present study, an optimised DOE(L9) orthogonal array based on the Taguchi statistical method was formulated and a series of experiments were conducted under controlled supervision by considering three different injection operating pressures (IOPs) (200, 220 and 240 bar) and three different compression ratios (CRs) (16.5, 17.5 and 18.5). The main objective of this paper is to find the best suited IOP and CR values which obtain higher performance, better combustion and lower emissions.     

Optimization of the activity of CaO/Al2O3 catalyst for biodiesel production using response surface methodology

In this work the response surface methodology (RSM) in conjunction with the central composite design (CCD) were used to optimize the activity of CaO/Al₂O₃ solid catalysts for the production of biodiesel. In order to measure the catalyst activity, we used palm oil as a representative raw material for the conversion to biodiesel. The biodiesel production was carried out in a batch laboratory scale reactor. The results showed that both the calcination temperature and the amount of calcium oxide loaded on the support had significant positive effects on the biodiesel yield. The maximum basicity and biodiesel yield obtained were about 194 μmol/g and 94%, respectively. Overall, the catalyst showed high performance at moderate operating conditions and its activity was maintained after two cycles.