Effects of porous material on transient natural convection heat transfer of nano-fluids inside a triangular chamber

This study numerically investigates the impact of porous materials, nano-particle types, and their concentrations on transient natural convection heat transfer of nano-fluid inside a porous chamber with a triangular section. The governing equations of the two-phase mixture model are separated on the computational domain and solved using the Finite Volume Method, taking into account the Darcy–Brinkman model for porous medium. It was observed that convection heat transfer inside the triangular chamber consists of three stages named initial, transient, and semi-steady. The features of each step are provided in detail. The results suggested that the use of a hybrid nano-fluid(water/aluminum oxide-cooper) inside a porous glass material and an increase in volume fraction of nano-particles have adverse effects on heat transfer rate. In contrast, as the nano-particle volume fraction of the single nano-fluid(water/aluminum oxide) inside the chamber increased, convection heat transfer rate improved. At the same time, it was observed that the use of both nano-fluids(single and hybrid) in the porous environment of the aluminum foam could improve convection.     

CFD study of non-premixed swirling burners: Effect of turbulence models

This research investigates a numerical simulation of swirling turbulent non-premixed combustion. The effects on the combustion characteristics are examined with three turbulence models: namely as the Reynolds stress model, spectral turbulence analysis and Re-Normalization Group. In addition, the P-1 and discrete ordinate (DO) models are used to simulate the radiative heat transfer in this model. The governing equations associated with the required boundary conditions are solved using the numerical model. The accuracy of this model is validated with the published experimental data and the comparison elucidates that there is a reasonable agreement between the obtained values from this model and the corresponding experimental quantities. Among different models proposed in this research, the Reynolds stress model with the Probability Density Function (PDF) approach is more accurate (nearly up to 50%) than other turbulent models for a swirling flow field. Regarding the effect of radiative heat transfer model, it is observed that the discrete ordinate model is more precise than the P-1 model in anticipating the experimental behavior. This model is able to simulate the subcritical nature of the isothermal flow as well as the size and shape of the internal recirculation induced by the swirl due to combustion.     

Reactivity stabilization and capacity study of fabricated alumina and zirconia-supported CaO-based sorbents for high-temperature CO2 capture in a fixed-bed reactor

Calcium looping process is a promising approach for CO₂ capture from the flue gas of fossil fuel power plants and the cement industry. Even though the advantages of calcium-based sorbents are low cost and high uptake capacity, they suffer from low durability during cycles. Modified sorbents were fabricated by adding alumina and zirconia and the mixture of alumina and zirconia to calcium oxide via the co-precipitation method. The performance of synthesized sorbents in terms of stability and CO₂ capture capacity were evaluated using a fixed bed reactor in various CO₂ sorption/desorption cycles. The sorbents were fabricated by a co-precipitation methodology using 10% binders (alumina and/or silica). X-ray diffraction (XRD), BET/BJH, and scanning electron microscopy (SEM) were conducted for characterization of synthesized sorbents. CaO-10% ZrO₂ showed the best performance among the fabricated sorbents in terms of stability during 5 cycles and CO₂ capacity (14 mmol CO₂/g sorbent). The formation of CaZrO₃ with a perovskite structure and high-temperature resistance could be attributed to well performance of zirconia-supported sorbent. On the other hand, no sign of aluminum zirconate formation was approved in XRD analysis for the fabricated sorbent using mixed binders of zirconia and alumina to enhance its stability during cycles.     

Simultaneous modification of hydrotalcite–silicate nanolayers as reinforcement of a new polyamide: thermal properties and flammability study

New polyamide/clay–layered double hydroxide nanocomposites (PACLN) were prepared from a synthesized aliphatic–aromatic polyamide (AAPA) and organically modified layered double hydroxide–clay (MLC) nanohybrid. MLC was obtained by simultaneous modification of montmorillonite and hydrotalcite nanolayers with cationic–anionic polyethyleneimine/poly(acrylic acid)-co-poly(2-acrylamido-2-methylpropanesulfonic acid) in an ion-exchange reaction. The analysis results indicated that the modification successfully occurred in MLC with increasing interlayer spacing. PACLN were prepared from AAPA and MLC using the solvent-casting technique. The thermal and combustion properties, morphology and structure of the resulting nanocomposites were studied using thermogravimetric analysis (TGA), microscale combustion calorimetry (MCC), scanning and transmission electron microscopies, Fourier transform infrared spectroscopy and X-ray diffraction. The results indicated that the silicate and hydrotalcite nanosheets were dispersed in the AAPA matrix. In other words, the silicate and hydrotalcite nanosheets were placed in the AAPA matrix as a new two-dimensional rearranged structure by self-assembly. The TGA results of nanocomposites in N₂ environment showed that PACLN is more heat resistant than AAPA. The 5% mass degradation temperature of PACLN containing 5 mass% of MLC was obtained as almost 60 °C more than that of AAPA. According to MCC results, the peaks of heat release rate were reduced from 156 to 91 W g⁻¹ for AAPA containing 5 mass% of MLC. © 2022 Society of Industrial Chemistry.     

New Type Anode for Calcium Ion Batteries Based on Silicon Carbide Monolayer

Silicon - A theoretical research study was conducted into the possibility of using a two-dimensional graphene-like material silicon carbide nano-sheet (2D-SiCNS) as an anode in rechargeable Ca-ion...     

Multilayered Electrospun/Electrosprayed Polyvinylidene Fluoride+Zinc Oxide Nanofiber Mats with Enhanced Piezoelectricity

Electrospun polyvinylidene fluoride (PVDF) nanofibers have been widely used in the fabrication of flexible piezoelectric sensors and nanogenerators, due to their excellent mechanical properties. However, their relatively low piezoelectricity is still a critical issue. Herein, a new and effective route to enhance the piezoelectricity of PVDF nanofiber mats by electrospraying zinc oxide (ZnO) nanoparticles between layers of PVDF nanofibers is demonstrated. As compared to the conventional way of dispersing ZnO nanoparticles into PVDF solution for electrospinning nanofiber mats, this approach results in multilayered PVDF+ZnO nanofiber mats with significantly increased piezoelectricity. For example, 6.2 times higher output is achieved when 100% of ZnO (relative to PVDF quantity) is electrosprayed between PVDF nanofibers. Moreover, this new method enables higher loading of ZnO without having processing challenges and the maximum peak voltage of ≈3 V is achieved, when ZnO content increases up to 150%. Additionally, it is shown that the samples with equal amount of material but consisting of different number of layers have no significant difference. This work demonstrates that the proposed multilayer design provides an alternative strategy to enhance the piezoelectricity of PVDF nanofibers, which can be readily scaled up for mass production.     

Synthesis and properties of new poly(amide imide)s containing trimellitic rings and hydantoin moieties in the main chain under microwave irradiation

Trimellitic anhydride was reacted with 4,4′‐diaminodiphenyl ether in a mixture of acetic acid and pyridine (3 : 2) at room temperature and was refluxed at 90–100°C, and N,N′‐(4,4′‐diphenylether) bistrimellitimide (3) was obtained in a quantitative yield. 3 was converted into N,N′‐(4,4′‐diphenylether) bistrimellitimide diacid chloride (4) by a reaction with thionyl chloride. Then, six new poly(amide imide)s were synthesized under microwave irradiation with a domestic microwave oven through the polycondensation reactions of 4 with six different derivatives of 5,5‐disubstituted hydantoin in the presence of a small amount of a polar organic medium such as o‐cresol. The polycondensation proceeded rapidly and was completed within 7–10 min, producing a series of new poly(amide imide)s in high yields with inherent viscosities of 0.27–0.66 dL/g. The resulting poly(amide imide)s were characterized by elemental analysis, viscosity measurements, differential scanning calorimetry, thermogravimetric analysis, derivative thermogravimetry, solubility testing, and Fourier transform infrared spectroscopy. All the polymers were soluble at room temperature in polar solvents such as N,N‐dimethylacetamide, N,N‐dimethylformamide, dimethyl sulfoxide, tetrahydrofuran, and N‐methyl‐2‐pyrrolidone. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 92: 3447–3453, 2004     

Co-Production of Fungal Biomass Derived Constituents and Ethanol from Citrus Wastes Free Sugars without Auxiliary Nutrients in Airlift Bioreactor

The potential of two zygomycetes fungi, Mucor indicus and Rhizopus oryzae, in assimilating citrus waste free sugars (CWFS) and producing fungal chitosan, oil, and protein as well as ethanol was investigated. Extraction of free sugars from citrus waste can reduce its environmental impact by decreasing the possibility of wild microorganisms growth and formation of bad odors, a typical problem facing the citrus industries. A total sugar concentration of 25.1 g/L was obtained by water extraction of citrus waste at room temperature, used for fungal cultivation in shake flasks and airlift bioreactor with no additional nutrients. In shake flasks cultivations, the fungi were only able to assimilate glucose, while fructose remained almost intact. In contrast, the cultivation of M. indicus and R. oryzae in the four-liter airlift bioreactor resulted in the consumption of almost all sugars and production of 250 and 280 g fungal biomass per kg of consumed sugar, respectively. These biomasses correspondingly contained 40% and 51% protein and 9.8% and 4.4% oil. Furthermore, the fungal cell walls, obtained after removing the alkali soluble fraction of the fungi, contained 0.61 and 0.69 g chitin and chitosan per g of cell wall for M. indicus and R. oryzae, respectively. Moreover, the maximum ethanol yield of 36% and 18% was obtained from M. indicus and R. oryzae, respectively. Furthermore, that M. indicus grew as clump mycelia in the airlift bioreactor, while R. oryzae formed spherical suspended pellets, is a promising feature towards industrialization of the process.     

Characterization of the Ion Beam Current Density of the RF Ion Source with Flat and Convex Extraction Systems

Silicon - The characterization of ion beam current density distribution and beam uniformity is crucial for improving broad-beam ion source technologies. The design of the broad ion beam extraction...     

Effects of Plant Growth Hormones on Mucor indicus Growth and Chitosan and Ethanol Production

The objective of this study was to investigate the effects of indole-3-acetic acid (IAA) and kinetin (KIN) on Mucor indicus growth, cell wall composition, and ethanol production. A semi-synthetic medium, supplemented with 0–5 mg/L hormones, was used for the cultivations (at 32 °C for 48 h). By addition of 1 mg/L of each hormone, the biomass and ethanol yields were increased and decreased, respectively. At higher levels, however, an inverse trend was observed. The glucosamine fraction of the cell wall, as a representative for chitosan, followed similar but sharper changes, compared to the biomass. The highest level was 221% higher than that obtained without hormones. The sum of glucosamine and N-acetyl glucosamine (chitin and chitosan) was noticeably enhanced in the presence of the hormones. Increase of chitosan was accompanied by a decrease in the phosphate content, with the lowest phosphate (0.01 g/g cell wall) being obtained when the chitosan was at the maximum (0.45 g/g cell wall). In conclusion, IAA and KIN significantly enhanced the M. indicus growth and chitosan production, while at the same time decreasing the ethanol yield to some extent. This study shows that plant growth hormones have a high potential for the improvement of fungal chitosan production by M. indicus.