Comparison of antireflection surfaces based on two-dimensional binary gratings and thin-film coatings

A comparison of antireflection surfaces based on the two-dimensional binary gratings and thin-film coatings is presented. First, a two-dimensional hybrid binary grating is proposed and analyzed by use of a vector-based implementation of the rigorous coupled-wave analysis method. The optimum parameters of the structure are determined and the effects that changing them have on spectral characteristics of the structure are studied. Then this structure is compared with multilayer thin-film antireflection filters. These filters are designed by genetic algorithm and needle methods, which are powerful methods for multilayer filter design. The comparison results show that the sensitivity of the grating to changes in the incident wavelength is high. However, a reflectance of the order of 10(-3)% at the design wavelength can be achieved. The sensitivity of designed antireflection thin-film filters to wavelength changes is lower, however, and the minimum achievable reflectance is higher.     

Hierarchy-Debug: a scalable statistical technique for fault localization

Considering the fact that faults may be revealed as undesired mutual effect of program predicates on each other, a new approach for localizing latent bugs, namely Hierarchy-Debug, is presented in this paper. To analyze the vertical effect of predicates on each other and on program termination status, the predicates are fitted into a logistic lasso model. To support scalability, a hierarchical clustering algorithm is applied to cluster the predicates according to their presence in different executions. Considering each cluster as a pseudo-predicate, a distinct lasso model is built for intermediate levels of the hierarchy. Then, we apply a majority voting technique to score the predicates according to their lasso coefficients at different levels of the hierarchy. The predicates with relatively higher scores are ranked as fault relevant predicates. To provide the context of failure, faulty sub-paths are identified as sequences of fault relevant predicates. The grouping effect of Hierarchy-Debug helps programmers to detect multiple bugs. Four case studies have been designed to evaluate the proposed approach on three well-known test suites, Space, Siemens, and Bash. The evaluations show that Hierarchy-Debug produces more precise results compared with prior fault localization techniques on the subject programs.     

Adaptive robust control of uncertain systems with state and input delay

In this paper, adaptive robust control of uncertain systems with multiple time delays in states and input is considered. It is assumed that the parameter uncertainties are time varying norm-bounded whose bounds are unknown but their functional properties are known. To overcome the effect of input delay on the closed loop system stability, new Lyapunov Krasovskii functional will be introduced. It is shown that the proposed adaptive robust controller guarantees globally uniformly exponentially convergence of all system solutions to a ball with any certain convergence rate. Moreover, if there is no disturbance in the system, asymptotic stability of the closed loop system will be established. The proposed design condition is formulated in terms of linear matrix inequality (LMI) which can be easily solved by LMI Toolbox in Matlab. Finally, an illustrative example is included to show the effectiveness of results developed in this paper.     

Success criteria analysis in support of probabilistic risk assessment for nuclear power plants: application on SGTR accident

Success criteria analysis (SCA) bridges the gap between deterministic and probabilistic approaches for risk assessment of complex systems.To develop a risk model,SCA evaluates systems behaviour in response to postulated accidents using deterministic approach to provide required information for the probabilistic model.A systematic framework is proposed in this article for extracting the front line systems success criteria.In this regard,available approaches are critically reviewed and technical challenges are discussed.Application of the proposed methodology is demonstrated on a typical Westinghouse-type nuclear power plant.Steam generator tube rupture is selected as the postulated accident.The methodology is comprehensive and general;therefore,it can be implemented on the other types of plants and complex systems.     

Cube-octameric silsesquioxane (POSS)-capped magnetic iron oxide nanoparticles for the efficient removal of methylene blue

Octavinyl polyhedral oligomeric silsesquioxane (POSS) was polymerized on the surface of Fe3O4 nanoparticles (NPs) and then the NPs were functionalized with carboxylic acid groups using thiol-ene click reactions with thioglycolic acid.The as-prepared Fe3O4@POSS-COOH magnetic hybrid NPs had mesoporous structures with an average particle diameter of 15 nm and a relatively high specific surface area of 447 m^2· g^-1.Experimental results showed that 4 mg of Fe3O4@POSS-COOH NPs efficiently adsorbed and removed methylene blue from water at 5 min.This is due to the presence of both carboxylic acid and pendant vinyl groups on the Fe3O4@POSS-COOH NPs.These NPs could be easily withdrawn from water within a few seconds under moderate magnetic field and showed high stability in acid and alkaline aqueous mediums.     

Mitigation of the impact of transformer inrush current on voltage sag by TCSC

Thyristor Controlled Series Capacitor (TCSC) as a dynamic system, besides its capability in increasing power transfer in transmission lines, can be used to enhance different power system issues. In this paper, the effect of TCSC on voltage sag following transformer inrush current is investigated. It is shown that excessive transient inrush current occurring during transformer energizing can be mitigated by TCSC. Hence, voltage sag as one of the key components of the power quality is alleviated for the sensitive loads that are connected to the same bus which the power transformer is energized from. During a fault, TCSC can improve the voltage sag by limiting the current and help to keep the voltage as high as possible. Moreover, the inrush currents and the associated voltage sags that usually occur after clearing heavy single- or multistage faults are mitigated by the presence of TCSC. The model used for simulating inrush current is based on the characteristics of the major hysteresis loop out of which the internal trajectories are defined using the translation principal and a linear compensation to generate closed loops. An arctangent relation between the flux and the exciting current is defined. The expression parameters are deduced by curve fitting empirical data defining the major loop or the single-valued saturation characteristic.     

Mechanochemical sulfidization of a mixed oxide-sulphide copper ore by co-grinding with sulfur and its effect on the flotation efficiency

Mechanochemical sulfidization of a mixed sulfide/oxide copper ore by co-grinding with sulfur and additives including Mg(NO₃)₂ and Fe(NO₃)₃ salts and iron, aluminum and magnesium powders was investigated for the first time. Also, the influence of sulfidization during the wet-milling process was examined on the separation efficiency and recovery of copper in detail. The results demonstrated that co-grinding with sulfur solely had the best flotation performance at the value of 0.5 wt.% and it was attributed to the possible existence of S-O bonding on copper oxides surfaces. In addition, adding magnesium nitrate salt, magnesium powder, iron nitrate salt and aluminum powder as additive associated with 0.5 wt% sulfur into ball milling caused the flotation improvement at the amounts of 0.2 wt%, 0.2 wt%, 0.5 wt% and 0.5 wt%, respectively. Also, the effect of grinding time and sulfidization pH with 0.5 wt% sulfur solely was determined and pHs of 7.5 to 8.5 gave the best results. The highest recovery (75.76%) and separation efficiency (63.44%) were achieved at pH of 7.5 and 8.5, respectively.     

Carbon nanotubes‐filled thermoplastic polyurethane–urea and carboxylated acrylonitrile butadiene rubber blend nanocomposites

This article reports the preparation and characterization of multiwalled carbon nanotubes (MWCNTs)‐filled thermoplastic polyurethane–urea (TPUU) and carboxylated acrylonitrile butadiene rubber (XNBR) blend nanocomposites. The dispersion of the MWCNTs was carried out using a laboratory two roll mill. Three different loadings, that is, 1, 3, and 5 wt % of the MWCNTs were used. The electron microscopy image analysis proves that the MWCNTs are evenly dispersed along the shear flow direction. Through incorporation of the nanotubes in the blend, the tensile modulus was increased from 9.90 ± 0.5 to 45.30 ± 0.3 MPa, and the tensile strength at break was increased from 25.4 ± 2.5 to 33.0 ± 1.5 MPa. The wide angle X‐ray scattering result showed that the TPUU:XNBR blends were arranged in layered structures. These structures are formed through chemical reactions of ? NH group from urethane and urea with the carboxylic group on XNBR. Furthermore, even at a very low loading, the high degree of nanotubes dispersion results in a significant increase in the electrical percolation threshold. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2014 , 131, 40341.     

Low voltage low noise open loop automatic amplitude control for voltage-controlled oscillators

This paper presents a low voltage low noise open loop automatic amplitude control method for voltage-controlled oscillators (VCO’s). In this method a feedback mechanism keeps the VCO at its optimum amplitude over temperature and process variations and then the loop is broken to avoid noise injection form the control circuitry to the VCO. The loop does not add extra noise to the VCO. Based on the proposed method, a low voltage low noise LC-VCO was designed for a low phase noise application in TSMC 0.18 micron RFCMOS technology. Simulations show considerable improvement in the phase noise with the application of the proposed method.