Moire Patterns of θ''''Precipitates in Al-Cu Alloy

A θ＇precipitate in an Al-Cu alloy was imaged.Its Moire patterns shown by TEM were discussed.     

RuO2含量对Ti／SnO2＋Sb2O3／RuO2＋PbO2阳极性台皂的影响

采用热分解法制备了以钛为基体、SnO2＋Sb2O3为中间层、RuO2＋PbO2为活性层的Ti／SnO2＋Sb2O3／RuO2＋PbO2电极。应用极化曲线法和循环伏安法测定不同RuO2含量下电极在25℃，0．5mol／LH2SO4溶液中的电催化活性。实验结果表明，随着RuO2含量的增加，相同电极电位下的电流密度增大；相同的扫描速率下，RuO2含量增加，电极的伏安电荷值增加，即电极的电催化活性随着RuO2含量的增加而增加。在1．0mol／LH2SO4溶液中，60℃、电流密度为2．0A／cm^2条件下，电极寿命快速检测结果表明，Ti／SnO2＋Sb2O3／RuO2＋PbO2电极的寿命随RuO2含量的增加而下降；但与不加有SnO2＋Sb2O3中间层的Ti／RuO2＋PbO2电极相比，电极寿命则显著增加。RuO2的含量还对电极的表面形貌有明显的影响。     

钢中夹杂物在镦粗过程中的运动行为

在镦粗变形中金属的流动行为不仅影响变形抗力的大小，而且会影响变形工艺设计的准确性。目前，在钢的镦粗试验方法中，关于金属夹杂物流动问题的有限元分析法尚不完善，本文提供了由试验得到的金属夹杂物流动行为的资料。试验证明，在镦粗过程中金属的流动并不是有限元解出的变形单元的连续移动。     

Thin-skin analysis technique for interaction of arbitrary-shape inducer field with long cracks in ferromagnetic metals

In using the AC field measurement (ACFM) technique for non-destructive evaluation (NDE) of metals, a current-carrying wire structure is used to induce eddy current within a thin layer of the metal and a magnetic field sensor to measure the field perturbations in the vicinity of the metal. The sensitivity of ACFM crack detection and sizing relies on an appropriate design of the wire structure geometry together with a dully placement of the sensor. This paper presents an analytical modeling technique for evaluating the electromagnetic field interaction of an ACFM probe with a long uniform crack in a ferromagnetic metallic slab. The probe in the proposed model can have an arbitrary-shape wire inducer with no restrictions on its relative sensor position. The technique is accurate and very efficient computationally. It first uses the two-dimensional Fourier transform to obtain the field distribution at the metal surface. The Laplacian field distribution above the metal is then determined by satisfying the so-obtained boundary condition at air–metal interface. To demonstrate the accuracy of the model, we consider the special case of a rhombic wire inducer. The comparison of our results with those obtained using the conventional algorithm in the literature validates the accuracy of the model introduced in this paper. To show the generality of the model, we also present theoretical and experimental results associated with a solenoid inducer with a three-dimensional geometry for which no analytical solution is available in the literature. The theoretical prediction of crack signal supported by experimental results is used to develop a model-based method for inverting crack signal into crack depth.     

Dislocation Structures in a BulkPb－doped Bi－SrCa－Cu－O High Temperature Superconductor

ＤｉｓｌｏｃａｔｉｏｎＳｔｒｕｃｔｕｒｅｓｉｎａＢｕｌｋＰｂ－ｄｏｐｅｄＢｉ－ＳｒＣａ－Ｃｕ－ＯＨｉｇｈＴｅｍｐｅｒａｔｕｒｅＳｕｐｅｒｃｏｎｄｕｃｔｏｒＳｈａＷｅｉ（沙维）（ＤｅｐａｒｔｍｅｎｔｏｆＭａｔｅｒｉａｌｓ，ＩｍｐｅｒｉａｌＣｏｌｌｅｇｅ...     

两种简化的侧凹抽芯机构

对于制品的内侧凹 ,在采用滑块、斜摆杆等一般抽芯机构较难实现时 ,通过改变抽芯机构的动作和复位形式 ,设计出两种简化的侧凹抽芯机构 ,并且制造方便,缩短了加工周期 ,实践证明该机构可有效地完成抽芯动作。     

Mo在水溶液中的耐腐蚀性能

综述了Mo在不同溶液中的电化学行为、电池作用腐蚀 行为，并从技术的角度总结了它在各种碱性溶液、酸性溶液、无机盐溶液以及海水中的耐蚀性能.最后对研究工作进行了展望.     

Stress－rupture Property and Microstructure of Yttria Dispersion Strengthened Alloy MA956

Ｓｔｒｅｓｓ－ｒｕｐｔｕｒｅＰｒｏｐｅｒｔｙａｎｄＭｉｃｒｏｓｔｒｕｃｔｕｒｅｏｆＹｔｔｒｉａＤｉｓｐｅｒｓｉｏｎＳｔｒｅｎｇｔｈｅｎｅｄＡｌｌｏｙＭＡ９５６ＳｈａＷｅｉ（沙维）（ＤｅｐａｒｔｍｅｎｔｏｆＣｉｖｉｌＦｎｇｉｎｅｅｒｉｎｇ，ＴｈｅＱｗｅ...     

BT16钛合金紧固件加工工艺分析

分析了不同规格俄制BT16钛合金自锁螺母显微组织、流线和显微硬度，并与俄制该合金φ8min丝材进行对比。研究结果表明：BT16钛合金紧固件显微组织为单相区变形获得的超细片状组织；其组织形态与退火态丝材一致，表明紧固件是在退火状态下直接使用的，未经过固溶时效强化处理；BT16钛合金紧固件采用了冷变形制造工艺。     

考虑观点多样性的评论选择问题

在线用户评论向消费者提供了丰富的商品信息,帮助他们挑选从日常用品到娱乐活动相关的商品.然而,评论的数量之大让用户难以对商品有一个清晰的认识.现有解决电子商务网站中评论信息过载问题的方法包括评估评论质量以及总结评论观点等.但是,基于评论质量排序的方法可能信息冗余,而评论总结方法忽视上下文导致易读性较差.因此,需要实现有效的评论选择方法.设计了基于字典和规则以及基于主题模型LDA的观点获取算法来形式化地表示每条评论;提出一种基于贪心算法的评论选择方法,实现从商品评论集中选择一组高质量的评论,并最大化评论集的商品属性覆盖度和评论观点多样性.最后在真实数据集上对算法进行实验来验证该算法,实验结果表明了该算法的有效性.