The potential of colour measurement for strength prediction of thermally treated wood

This paper investigates the effects of thermal treatment of birch with respect to colour and strength. Birch wood was treated at 175 °C and 200 °C for 0 h, 1 h, 3 h and 10 h. In bending-strength experiments, treatment was also performed at 185 °C for 2 h. Both static bending strength and impact bending strength were investigated using multivariate statistics (PLS) for correlation to process parameters, density, EMC, position in board, modulus of elasticity (only in static bending), colour and dimensions of samples. In static bending, two PLS models were designed, one based on process parameters and the other based on colour and EMC. From these models it was concluded that colour is not a useful parameter for prediction of strength. In impacted bending, the correlation was too small to give useful results. One test of static bending strength with matched samples was performed, and it showed a strength reduction of 43% when treatment was conducted at 200 °C for 3 h. Measurement of colour homogeneity of the treated boards showed that the colour is not homogeneous.     

Accelerated Mold Test on Dried Pine Sapwood Boards: Impact of Contact Heat Treatment

Abstract

We test the hypothesis that the combination of kiln drying of double-stacked boards and contact heat treatment will reduce the susceptibility of treated boards to colonization by mold fungi. Winter-felled Scots pine (Pinus sylvestris L.) sapwood boards were double-stacked in an industrial kiln in ‘‘sapwood out’’ and ‘‘sapwood in’’ positions. Dried samples were then contact heat-treated using a hot press at three different temperatures (140°C, 170°C, and 200°C) for three different periods (1, 3, and 10 min). An accelerated mold test was performed in a climate chamber where naturally mold-infected samples were used as a source of mold inocula. Contact heat treatment degraded the saccharides that accumulated at dried surfaces, and reduced the mold growth. The threshold temperature and time for inhibiting mold growth were 170°C for 10 min. However, for industrial application, the most feasible combination of temperature and time would be 200°C for 3 min. We concluded that double stacking/contact heat treatment used is an environmentally friendly alternative to chemicals for reducing mold on Scots pine sapwood boards.     

MT1‐Selective Melatonin Receptor Ligands: Synthesis,Pharmacological Evaluation,and Molecular Dynamics Investigation of N‐{[(3‐O‐Substituted)anilino]alkyl}amides

The design of compounds selective for the MT₁ melatonin receptor is still a challenging task owing to the limited knowledge of the structural features conferring selectivity for the MT₁ subtype, and only few selective compounds have been reported so far. N‐(Anilinoalkyl)amides are a versatile class of melatonin receptor ligands that include nonselective MT₁/MT₂ agonists and MT₂‐selective antagonists. We synthesized a new series of N‐(anilinoalkyl)amides bearing 3‐arylalkyloxy or 3‐alkyloxy substituents at the aniline ring, looking for new potent and MT₁‐selective ligands. To evaluate the effect of substituent size and shape on binding affinity and intrinsic activity, both flexible and conformationally constrained derivatives were prepared. The phenylbutyloxy substituent gave the best result, providing the partial agonist 4 a , which was endowed with high MT₁ binding affinity (pK_i=8.93) and 78‐fold selectivity for the MT₁ receptor. To investigate the molecular basis for agonist recognition, and to explain the role of the 3‐arylalkyloxy substituent, we built a homology model of the MT₁ receptor based on the β₂ adrenergic receptor crystal structure in its activated state. A binding mode for MT₁ agonists is proposed, as well as a hypothesis regarding the receptor structural features responsible for MT₁ selectivity of compounds with lipophilic arylalkyloxy substituents.     

N-(Anilinoethyl)amide Melatonergic Ligands with Improved Water Solubility and Metabolic Stability

The MT₂-selective melatonin receptor ligand UCM765 (N-(2-((3-methoxyphenyl)(phenyl)amino)ethyl)acetamide), showed interesting sleep inducing, analgesic and anxiolytic properties in rodents, but suffers from low water solubility and modest metabolic stability. To overcome these limitations, different strategies were investigated, including modification of metabolically liable sites, introduction of hydrophilic substituents and design of more basic derivatives. Thermodynamic solubility, microsomal stability and lipophilicity of new compounds were experimentally evaluated, together with their MT₁ and MT₂ binding affinities. Introduction of a m-hydroxymethyl substituent on the phenyl ring of UCM765 and replacement of the replacement of the N,N-diphenyl-amino scaffold with a N-methyl-N-phenyl-amino one led to highly soluble compounds with good microsomal stability and receptor binding affinity. Docking studies into the receptor crystal structure provided a rationale for their binding affinity. Pharmacokinetic characterization in rats highlighted higher plasma concentrations for the N-methyl-N-phenyl-amino derivative, consistent with its improved microsomal stability and makes this compound worthy of consideration for further pharmacological investigation.     

Multiphysics simulation of a novel concept of MEMS-based solid propellant thruster for space propulsion

This work analyzes a novel MEMS-based architecture of submillimeter size thruster for the propulsion of small spacecrafts, addressing its preliminary characterization of performance. The architecture of microthruster comprises a setup of miniaturized channels surrounding the solid-propellant reservoir filled up with a high-energetic polymer. These channels guide the hot gases from the combustion region towards the nozzle entrance located at the opposite side of the thruster. Numerical simulations of the transient response of the combustion gases and wafer heating in thruster firings have been conducted with FLUENT under a multiphysics modelling that fully couples the gas and solid parts involved. The approach includes the gas-wafer and gas-polymer thermal exchange, burnback of the polymer with a simplified non-reacting gas pyrolysis model at its front, and a slip-model inside the nozzle portion to incorporate the effect of gas-surface and rarefaction onto the gas expansion. Besides, accurate characterization of thruster operation requires the inclusion of the receding front of the polymer and heat transfer in the moving gas-solid interfaces. The study stresses the improvement attained in thermal management by the inclusion of lateral micro-channels in the device. In particular, the temperature maps reveal the significant dependence of the thermal loss on the instantaneous surface of the reservoir wall exposed to the heat flux of hot gases. Specifically, the simulations stress the benefit of implementing such a pattern of micro-channels connecting the exit of the combustion reservoir with the nozzle. The results prove that hot gases flowing along the micro-channels exert a sealing action upon the heat flux at the reservoir wall and partly mitigate the overall thermal loss at the inner-wall vicinity during the burnback. The analysis shows that propellant decomposition rate is accelerated due to surface preheating and it suggests that a delay of the flame extinction into the reservoir is possible. The simulated operation of the thruster concept shows encouraging performance.     

IL-2 rescues antigen-specific T cells from radiation or dexamethasone-induced apoptosis. Correlation with induction of Bcl-2

Most studies of apoptosis on T lymphocytes have examined the effects of various stimuli on immature T cells from the thymus. Previous work has indicated that apoptosis of mature memory T cells may be an important pathophysiologic mechanism in diseases such as AIDS, cancer, and autoimmunity. The effect of IL-2 on apoptosis of T cells is not clear. Therefore, we studied the ability of IL-2 to rescue Ag-specific T cells from apoptosis. We found that IL-2, in a dose-dependent manner, prevented T cells from entering apoptosis induced by gamma-irradiation, mitomycin C, or dexamethasone. This effect was specific for IL-2; IL-1 beta, IL-6, or IFN-gamma could not reproduce it. In contrast to Ag-specific T cells, immature T cells and naive mature peripheral T cells could not be rescued by IL-2 from radiation-induced apoptosis. Apoptosis rescue by IL-2 was associated with the induction of bcl-2 mRNA and protein. This induction could not be attributed to the effects of IL-2 on the cell cycle, as T cells that were prevented from cell cycle progression by irradiation showed a similar induction of bcl-2. Rescued cells retained their Ag-specific proliferative capacity and in vivo functions. These findings demonstrate that the apoptotic death of Ag-specific T cell lines, cells which can be regarded as a model for memory T cells, can be prevented with IL-2. This effect may have important therapeutic implications for patients receiving chemotherapy or radiotherapy, and for patients with AIDS who develop immunodeficiency primarily as a result of loss of Ag-specific memory T cells.     

Electron transmission through organized organic thin films

Low-energy electron photoemission spectroscopy (LEPS) allows the study of the electronic properties of organized organic thin films (OOTF) adsorbed on conducting surfaces by monitoring the energy and angular distribution of electrons emitted from the substrate and transmitted through the film. The transmission properties are explained by electronic band structure in the organic film. This band is an example of an electron resonance that is delocalized in the layer. It results from the two-dimensional nature of the layer. Other resonances in the transmission spectra are also discussed, as well as their experimental manifestation. The temperature dependence of the electron transmission efficiency is explained in terms of dependence of the transmission probability on the initial momentum of the electron and on the relative orientation of the electron velocity and the molecules in the film. Hence, despite the fact that the molecules in the OOTF are weakly interacting, when not charged, the electron transmission through the film is governed by cooperative effects. These effects must be taken into account when considering electronic properties of adsorbed layers.     

Minimization of the Theoretical Error of Input Parameters for a Vapor Permeation Apparatus

All input experimental errors for membrane flux determination were analyzed. The overall error in pressure did not largely influence the determination of membrane flux. The main contribution to errors was ascribed to flow meters and membrane thickness. The choice of an optimal operational range for input parameters led to elimination of at least 2/3 of the theoretical relative error for subsequent evaluation of the permeability of individual species. This is especially valuable for low‐permeable membranes, whereas a very low relative theoretical error can be obtained in the case of highly permeable materials.