Optical Amplification at 1.3 μm in a Praseodymium-Doped Sulfide-Glass Fiber

Praseodymium-doped glasses were prepared in the Ga-Na-S (GNS) system and their optical properties were studied. A single-mode fiber with an attenuation loss of 1.2 dB/m at a wavelength of 1.31 μm was fabricated using an extrusion method, and the amplification characteristics were measured in the bidirectional pumping configuration. We demonstrated a gain coefficient of 0.81 dB/mW at a wavelength of 1.34 μm, which is the highest we have ever reported, and achieved a net gain of 32 dB for a pump power of 90 mW. Highly efficient optical amplification at a wavelength of 1.3 μm was demonstrated in the praseodymium-doped GNS fiber.     

Preparation and Properties of Carbon/Zeolite Composites with Corrugated Structure

Composites of carbon/zeolite with corrugated structures were prepared by carbonization, steam activation and/or hydrothermal treatment of corrugated paper. No zeolite formation resulted from conventional hydrothermal treatment of the carbonized and activated samples in NaOH solution but zeolite Na P1 was formed by addition of silica to the solution. By contrast, zeolites Na P1 and Na A were formed by the in-situ crystallization method (hydrothermal treatment of solid samples impregnated with NaOH solution). With higher impregnating NaOH concentrations, longer reaction times and higher reaction temperatures, the products changed to sodalite- and cancrinite-type compounds. Hydrothermal treatment was effective in increasing the specific surface area of the products by the formation of zeolite from amorphous calcium aluminosilicate, and also increased the mechanical strength by gluing together the carbon fibers in the samples. The resulting samples showed enhanced adsorption for polar molecules such as ammonia, water vapor and methanol due to the formation of composites of activated carbon with hydrophilic zeolites.     

Preparation and photocatalytic activity of Keggin-ion tungstate and TiO2 hybrid layer-by-layer film composites

Keggin ions (PW₁₂O₄₀³⁻ (PW₁₂), SiW₁₂O₄₀⁴⁻ (SiW₁₂), H₂W₁₂O₄₀⁶⁻ (H₂W₁₂)) and TiO₂ hybrid thin films were prepared using the layer-by-layer method. Their photocatalytic activities were investigated using gaseous 2-propanol decomposition. All films were transparent in the visible wavelength range. For 2-propanol decomposition, H₂W₁₂ was the most effective for the combination with TiO₂ despite having the smallest TiO₂ deposition amount. The photocatalytic activity of the PW₁₂–TiO₂ hybrid film was increased 2.3 times by visible light with UV illumination. This increase was less remarkable for hybrid films of other Keggin ions, suggesting that the visible light excitation of reduced PW₁₂ plays an important role in the enhancement of 2-propanol decomposition.     

Direct dissimilar joining of aluminium alloys and polyamide 6 by friction lap joining*

Direct dissimilar joining of various Al alloy (A1050, A3004, A5052 and A5083) plates and a polyamide 6 plate was performed using friction lap joining (FLJ) with the Al alloy plate as a top and the polyamide 6 plate as a bottom. The effect of Mg content in Al alloys on the joining strength was investigated. TEM analysis made clear that the polyamide 6 and Al alloys were joined via oxide layer consisting of Al₂O₃ and MgO. The results of XPS analysis indicated that MgO was formed by the heating during FLJ, and the quantity of MgO was increased with increasing Mg content in Al alloys. The tensile shear strengths of A3004, A5052 and A5083 joints were saturated to about 2 kN because of the tensile fracture at the polyamide 6 plate outside the tool-passed zone, which were higher than that of the A1050 joint fractured at the joint interface. The peel strength of the joint was increased with increasing Mg content in Al alloys, and the fracture occurred both at the joint interface and at the polyamide 6 plate on the joint area. The fraction of polyamide 6 plate fracture was also increased with increasing Mg content in Al alloys.     

Reinforcement of polypropylene by cellulose microfibers modified with polydopamine and octadecylamine

Cellulose microfibers (CMFs) having surfaces modified with polydopamine (PDPA) and octadecylamine (ODA) were prepared, and their reinforcing abilities for polypropylene (PP) were investigated. The PDPA coating was made via self-polymerization of dopamine (P-CMF), and subsequent alkylation was conducted by the reaction with ODA (OP-CMF). The modified CMFs exhibited improved dispersibility in the PP matrix due to the reduced hydrophilicity. The OP-CMF/PP composite prepared by batch mixing had a higher tensile modulus compared to that for the pure PP and composites with unmodified CMFs. However, excess alkylation lowered the tensile modulus, and the presence of an optimal degree of alkylation was demonstrated. The CMF/PP-IM composites fabricated by injection molding exhibited improved tensile properties compared to those prepared by batch mixing. Both the tensile modulus and yield stress were increased by increasing the CMF content and improved by the surface modification of the CMFs.     

Pore Structure and Thermal Stability of Mesoporous Mullite Fibers Prepared by Crystallization and Selective Leaching of Al2O3-SiO2 Glass Fibers

Porous mullite fibers were prepared by crystallization and selective leaching of Al2O3-SiO2 glass fibers using buffered HF-NH4F(BHF) aqueous solutions. The optimum concentration of BHF solution for selective leaching of the fibers was 0.9 mass% HF and 17.0 mass% NH4F. By firing at 1000–1300°C, the glass fibers changed into composite texture of mullite and glassy phase. Since the pores in the fibers were formed by selective leaching of glassy phase among mullite grains, they were tunable by changing the firing conditions of fibers. Pore size of the samples changed from around 4 nm in the 1100°C fired sample to 16 and 40 nm in the 1200 and 1300°C fired samples, respectively. The highest specific surface area obtained was around 30 m2/g, when the fibers were heat treated at 1200°C for 24 h and leached for 20 h in 0.9 mass% HF-17.0 mass% NH4F solution. From the thermal stability tests of the porous mullite fibers, its specific surface area was found to be maintained up to 1200–1300°C.     

Cathode properties of metal trifluorides in Li and Na secondary batteries

Fluorine compounds have high discharge voltage due to its highly ionic metal-ligand bonds. In them, perovskite-type metal trifluorides with corner sharing matrix have large bottlenecks of diffusion pathways for intercalants. Iron trifluoride composites (FeF₃-C) prepared by planetary ball milling with carbon showed reversible charge/discharge behavior not only for Li, but also for Na anodes. X-ray diffraction and ⁵⁷Fe Mössbauer spectroscopy were applied to characterize the electrochemical properties of FeF₃ vs. Li and Na anodes. The cathode performances of the other commercially available transition metal trifluorides such as MF₃ (M = Ti, V, Mn, Co) have been also investigated.     

Hydrogenation and dehydrogenation processes of palladium thin films measured in situ by spectroscopic ellipsometry

The hydrogenation and dehydrogenation switching processes of Pd thin films were analyzed by measuring in situ in real time the variation in ellipsometric Ψ and Δ during hydrogenation and dehydrogenation using spectroscopic ellipsometry. The hydrogenation proceeded from the film surface and a mixture layer of metal and hydride was formed at the surface. With time elapse, the thickness of the mixture layer increased rapidly. After the whole Pd metal layer transformed to the mixture layer, the concentration of hydride in the mixture layer increased. Finally, the concentration reached 1; the whole Pd in the mixture layer was hydrogenated, and the hydrogenation of Pd was complete. On the other hand, the dehydrogenation proceeded in a way completely opposite to the hydrogenation process; the concentration of hydride in the mixture layer decreased, Pd metal layer was formed at the interface between the film and the substrate, and the whole layer returned to Pd metal. The dehydrogenation proceeds much faster than hydrogenation.     

Retention of ions on nonporous charged stationary phases

The interactions between ion-exchange resins and counterions consist of several mechanisms, such as ion-pair formation between active sites and counterions, specific adsorption, solvation changes, and double-layer accumulation. The double-layer accumulation of ions, which is a typical nonstoichiometric mechanism, is an important factor governing overall ion-exchange chromatographic retention when a major part of the stationary-phase surface is in contact with eluent flows. Nonporous stationary phases, where solutes are accessible to the surfaces by convection as well as by diffusion, possibly highlight this nonstoichiometric contribution through the coupling of a flow profile with an electrostatic potential function. The retention of ions on nonporous stationary phases has been interpreted by a model derived on the basis of the Poisson-Boltzmann equation including solvation change terms. Unusual retention behaviors have been confirmed only for anions, and can be explained by the model including the assumption that anions undergo solvation changes in a thin layer (approximately 5 nm thickness) at the vicinity of the stationary phase; the thickness should be a function of eluent flow rates. This strongly suggests that there is a difference in solvation nature between cations and anions. It can be inferred that water molecules interacting with polymer domains of the stationary phase behave like single molecules and cannot form a stable hydration shell around an anion as usually seen in bulk solution.     

Sum-Frequency Generation of Femtosecond Pulses in CsLiB(6)O(10) Down to 175 nm

Using a 150-mum-thick CsLiB(6)O(10) crystal, we produced 100-fs, >200-nJ light pulses tunable between 175 and 180 nm by sum-frequency generation at a 1-kHz repetition rate with an all-solid-state laser system mixing the fourth harmonic of a femtosecond Ti:sapphire regenerative amplifier and the idler pulse from a traveling-wave optical parametric amplifier.