Copper corrosion in sodium dodecyl sulphate solutions and carbon nanotube nanofluids: A modified Koutecky–Levich equation to model the agitation effect

Copper corrosion in sodium dodecyl sulphate (SDS) solutions and carbon nanotube (CNT) nanofluids were studied by potentiodynamic polarization. For the corrosion current densities calculations, Koutecky–Levich equation was modified to model the combined charge and mass transport. 0.005 M SDS reduced the copper corrosion current density by 81%. Higher SDS concentrations enhanced corrosion. Stirring SDS solutions increased the corrosion current density by ∼75%. By adding CNT to SDS solution, the corrosion current density first decreased and then remained constant. Stirring CNT nanofluids didn’t change the corrosion current density. An adsorbed CNT layer on copper controlled the corrosion process in CNT nanofluids.     

Plasticized poly(vinyl chloride) composites: Influence of different nanofillers as antimigration agents

In this study, plasticized poly(vinyl chloride) (PVC) composites with different nanofillers, including single‐walled carbon nanotubes (SWCNTs), organoclay, TiO₂, and ZnO nanoparticles, were prepared, and their effects on plasticizer migration were investigated. Scanning electron micrographs revealed the dispersion quality of the nanofillers in the polymer matrix. It had a significant influence on the performance of the nanofillers in the process of plasticizer migration. Migration and exudation tests showed that the nanofillers could efficiently hinder plasticizer migration. On the basis of these results, we concluded that carbon nanotubes were the best antimigration agent in the plasticized system. This was ascribed to the high aspect ratio of the SWCNTs and the good interactions between them and the plasticizer. Also, TiO₂ nanoparticles showed a better performance compared to the ZnO nanoparticles. This was due to the more homogeneous dispersion of the TiO₂ in the polymer matrix and the higher surface area of the particles. The differential scanning calorimetry thermograms were in good agreement with the migration tests. The lowest change in the glass‐transition temperature was observed for the composite filled with SWCNTs. This indicated that a lower amount of the plasticizer migrated from PVC. The thermogravimetric analysis curves showed that the incorporation of the nanofillers improved the thermal stability of the PVC. The results could be useful for determining the efficiency of plasticized PVC in applications. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42559.     

Predicting potential deadlocks in multithreaded programs

In a multithreaded program, competition of threads for shared resources raises the deadlock possibility, which narrows the system liveness. Because such errors appear in specific schedules of concurrent executions of threads, runtime verification of threads behavior is a significant concern. In this study, we extended our previous approach for prediction of runtime behavior of threads may lead to an impasse. Such a prediction is of importance because of the nondeterministic manner of competing threads. The prediction process tries to forecast future behavior of threads based on their observed behavior. To this end, we map observed behavior of threads into time‐series data sets and use statistical and artificial intelligence methods for forecasting subsequent members of the sets as future behavior of the threads. The deadlock prediction is carried out based on probing the allocation graph obtained from actual and predicted allocation of resources to threads. In our approach, we use an artificial neural network (ANN) because ANNs enjoy the applicable performance and flexibility in predicting complex behavior. Using three case studies, we contrasted results of the current and our previous approaches to demonstrate results. Copyright © 2015 John Wiley & Sons, Ltd.     

Effects of Recycling on the Mechanical Behavior of Polypropylene at Room Temperature Through Statistical Analysis Method

This article reports the effects of recycled material percentage, annealing conditions, and glass fiber percentage on the mechanical behavior of injection molded polypropylene samples. Specimens were prepared with different percentages of recycled material ranging from 0 to 100%. Two groups of samples, i.e., non‐annealed and annealed at 150°C, were tested to investigate annealing effects. The effects of adding fiber (0–7.5%) to specimens was also investigated. It was found that increasing the amount of recycled material improves the material properties in a non‐linear trend. Annealing had a significant positive effect on both non‐fiber‐added and fiber‐added samples: it improved the yield stress of non‐reinforced polypropylene samples by more than 10% and their Young's modulus by about 50%. Fiber‐added materials showed more variability, and adding fiber also improved the Young's modulus and the yield stress of the samples by about 50%. The results indicate that the three factors investigated improved toughness of the injected polypropylene samples; however the effects are not significant. The study findings reveal that using recycled polypropylene has no significant effect on the material properties of polypropylene. POLYM. ENG. SCI., 56:1283–1290, 2016 © 2016 Society of Plastics Engineers     

A methodology to determine the elastic properties of anisotropic rocks from a single uniaxial compression test

This paper introduces a new methodology to measure the elastic constants of transversely isotropic rocks from a single uniaxial compression test. We first give the mathematical proof that a uniaxial compression test provides only four independent strain equations. As a result, the exact determination of all five independent elastic constants from only one test is not possible. An approximate determination of the Young's moduli and the Poisson's ratios is however practical and efficient when adding the Saint–Venant relation as the fifth equation. Explicit formulae are then developed to calculate both secant and tangent definitions of the five elastic constants from a minimum of four strain measurements. The results of this new methodology applied on three granitic samples demonstrate a significant stress-induced nonlinear behavior, where the tangent moduli increase by a factor of three to four when the rock is loaded up to 20 MPa. The static elastic constants obtained from the uniaxial compression test are also found to be significantly smaller than the dynamic ones obtained from the ultrasonic measurements.     

A novel stimuli-responsive magnetic hydrogel based on nature-inspired tragacanth gum for chemo/hyperthermia treatment of cancerous cells

Journal of Polymer Research - Derivatives of formyl pyrazole were synthesized by the reaction of acetophenone, 4-methyl acetophenone, 3-acetyl furan, 3-acetyl thiophen and phenyl hydrazine...     

Fault diagnosis of an automobile cylinder head using low frequency vibrational data

This paper proposes a vibration-based fault-diagnosis method for mechanical parts. This method, after algorithm development, only requires a single inexpensive test to inspect the part which could take as short as half a second. The algorithm is developed in three major stages, (i) exciting specimens without or with known faults using a controlled force and recording acceleration of a single point for a short time (ii) finding a signature for each faulty specimen, using Fourier transform and statistical analysis. (iii) Developing a multi-layer perceptron, as a mathematical model, using the results of stage (ii). The elements of a part signature are the inputs to the model. The location (and possibly size and shape factor) of the fault is model output. Stage (i) can be performed experimentally or alternatively with a validated FEM, one experiment or simulation per specimen. The proposed technique was examined to locate (isolate) a fault on an automobile cylinder head. The presented accuracy is considerable, and the data collected at fairly low frequency range (below 1200 Hz) were found to be sufficient for this technique. In the case study of this paper, possible fault locations are on a line; as a result, fault location has one dimension. It is shown that the technique can be extended to higher dimensions.     

Mortality response of folate receptor-activated,PEG–functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation

TiO₂ nanoparticles (NPs) were synthesized by hydrothermal assisted sol–gel technique. In the next step, as-synthesized NPs were modified by poly ethylene glycol (PEG). Then, folic acid (FA) was conjugated to TiO₂–PEG. Finally, Doxorubicin (Dox) as an anticancer drug was loaded on as-prepared TiO₂–PEG–FA nanocarrier. The optimization of TiO₂ and FA concentration and the influence of ultraviolet (UV) irradiation on photocatalytic activity of nanocarrier and Dox loaded carrier were assessed by utilizing the 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT)-assay method.