Polyurethane-SAPO-34 mixed matrix membrane for CO2/CH4 and CO2/N2 separation

SAPO-34 nanocrystals (inorganic filler) were incorporated in polyurethane membranes and the permeation properties of CO₂, CH_4, and N₂ gases were explored. In this regard, the synthesized PU-SAPO-34 mixed matrix membranes (MMMs) were characterized via SEM, AFM, TGA, XRD and FTIR analyses. Gas permeation properties of PU-SAPO-34 MMMs with SAPO-34 contents of 5 wt%, 10 wt% and 20 wt% were investigated. The permeation results revealed that the presence of 20 wt% SAPO-34 resulted in 4.45%, 18.24% and 40.2% reductions in permeability of CO_2, CH_4, and N₂, respectively, as compared to the permeability of neat polyurethane membrane. Also, the findings showed that at the pressure of 1.2 MPa, the incorporation of 20 wt% SAPO-34 into the polyurethane membranes enhanced the selectivity of CO₂/CH₄ and CO₂/N₂, 14.43 and 37.46%, respectively. In this research, PU containing 20 wt% SAPO-34 showed the best separation performance. For the first time, polynomial regression (PR) as a simple yet accurate tool yielded a mathematical equation for the prediction of permeabilities with high accuracy (R² > 99%).     

Irreversible changes in protein conformation due to interaction with superparamagnetic iron oxide nanoparticles

The understanding of the interactions between nanomaterials and proteins is of extreme importance in medicine. In a biological fluid, proteins can adsorb and associate with nanoparticles, which can have significant impact on the biological behavior of the proteins and the nanoparticles. We report here on the interactions of iron saturated human transferrin protein with both bare and polyvinyl alcohol coated superparamagnetic iron oxide nanoparticles (SPIONs). The exposure of human transferrin to SPIONs results in the release of iron, which changes the main function of the protein, which is the transport of iron among cells. After removal of the magnetic nanoparticles, the original protein conformation is not recovered, indicating irreversible changes in transferrin conformation: from a compact to an open structure.     

The effect of pressure on removal of carbon monoxide in biofilter

Solubility of carbon monoxide in water is very important for its biological oxidation or removal process of gaseous pollutants. Present research shows the effect of pressure on solubility of carbon monoxide in liquid phase and its removal process by a biofilter. The results are considered as laboratory research on carbon monoxide elimination. In this method a pressurized trickle-bed biofilter was used to increase pressure in the reactor. The biofilter was filled with Leca-stones and inoculated with microorganisms. When the system’s pressure is increased, the solubility of carbon monoxide will be increased, respectively, and it causes a better reaction of the microorganisms for removing of gaseous pollutants. The efficiency was improved significantly by increasing the pressure in the reactor.     

Deactivation of Pt/wire-mesh and vanadia/monolith catalysts applied in selective catalytic reduction of NO<Subscript><Emphasis Type="Italic">x</Emphasis></Subscript> in flue gas

In this study the deactivation of Pt/wire mesh and vanadia/monolith catalysts by aerosol particles of some inorganic salts (K₂SO₄, KCl and ZnCl₂) with high or low melting points has been investigated. The aerosol particles may either diffuse within the matrix of the catalysts and block the mezzo and micro pores, or deposit on the outer surface of the catalysts and form a porous layer causing a mass transfer resistance that ultimately deactivates the catalysts. It has been observed that in both Pt/wire mesh and vanadia/monolith catalysts the deactivation effect of ZnCl₂ was more pronouced compared to other salts. As an example, after 31 hours of exposure to ZnCl₂, 10% of the catalysts activities was lost. This may be related to the ZnCl₂ lower melting point in comparison with other poisons. These results are in agreement with the previous findings for deactivation of wire-mesh catalysts used for oxidation of volatile organic compounds (VOC) and CO by exposing the catalysts to the aerosols generated from inorganic salts.     

Mortality response of folate receptor-activated,PEG–functionalized TiO2 nanoparticles for doxorubicin loading with and without ultraviolet irradiation

TiO₂ nanoparticles (NPs) were synthesized by hydrothermal assisted sol–gel technique. In the next step, as-synthesized NPs were modified by poly ethylene glycol (PEG). Then, folic acid (FA) was conjugated to TiO₂–PEG. Finally, Doxorubicin (Dox) as an anticancer drug was loaded on as-prepared TiO₂–PEG–FA nanocarrier. The optimization of TiO₂ and FA concentration and the influence of ultraviolet (UV) irradiation on photocatalytic activity of nanocarrier and Dox loaded carrier were assessed by utilizing the 3-(4,5-dimethylthiazol-2yl)-2,5-diphenyltetrazolium bromide (MTT)-assay method.     

Effect of oxide and carbide nanoparticles on tribological properties of phenolic-based nanocomposites

The phenolic-based composites and components are widely used because of their excellent thermal, tribological and mechanical behaviors. In the present study, phenolic resin composed of hexamine, novalac, furfural, and furfuryl alcohol has been used. The effects of two carbide nanoparticles (SiC and TiC) and two oxide nanoparticles (TiO₂ and ZrO₂) on the tribological properties of phenolic resin were experimentally investigated. This paper intends to identify the effects of different fillers, fraction of particles and normal load on wear rate and coefficient of friction in dry sliding wear of phenolic-based nanocomposites against hard metal. The proportions of fillers were 0.5, 1 and 2?vol% and experiments were carried out under 40, 50, 60 and 70?N loads and at 0.2?m/s speed. The fillers were mixed with phenolic resin and molded in the form of a cylinder (8.5?mm diameter?×?25?mm height). The samples were cured at 135?°C with a special heating cycle. The wear tests were performed on pin-on-disk testing apparatus at ambient temperature. The composite pins were tested in dry sliding against carbon steel disk. The worn surfaces of samples have been investigated by SEM and the effects of nanometer particles showed different wear mechanisms. Observations showed that carbide particles have better enhancing effect on tribological properties of phenolic resin as compared to the oxide particles. Nanocomposites with SiC particles showed the best tribological properties among the investigated samples. The optimal content of SiC nanoparticles were 1?vol%.