Surface modification of ultra‐high‐molecular‐weight polyethylene. II. Effect on the physicomechanical and tribological properties of ultra‐high‐molecular‐weight polyethylene/poly(ethylene terephthalate) composites

We performed surface modification of ultra‐high‐molecular‐weight polyethylene (UHMWPE) through chromic acid etching, with the aim of improving the performance of its composites with poly(ethylene terephthalate) (PET) fibers. In this article, we report on the morphology and physicomechanical and tribological properties of modified UHMWPE/PET composites. Composites containing chemically modified UHMWPE had higher impact properties than those based on unmodified UHMWPE because of improved interfacial bonding between the polymer matrix and the fibers and better dispersion of the fibers within the modified UHMWPE matrix. Chemical modification of UHMWPE before the introduction of PET fibers resulted in composites exhibiting improved wear resistance compared to the base material and compared to unmodified UHMWPE/PET composites. On the basis of the morphological studies of worn samples, microploughing and fatigue failure associated with microcracking were identified as the principle wear mechanisms. © 2005 Wiley Periodicals, Inc. J Appl Polym Sci, 2006     

Thermodynamics of ionic-association in aqueous solutions of Ca and Mg organic salts using ion-selective electrode technique—II. benzoate, o-toloate, o-chlorobenzoate and salycylate

The stoichiometric association constants, K, the thermodynamic association constant, K_A, and the other thermodynamic parameters such as ΔS°, ΔH° and ΔG° for the association between each of the Ca and Mg ions with benzoate, o-toloate, o-chlorobenzoate and salycylate have been determined at 25°C, 35°C and 45°C in aqueous media. Ion-selective electrode technique has been used in the measurements of Ca and Mg ion activitiesThe trend of association behavior of both Ca and Mg aromatic salts could not be explained on the basis of pK_a of the mother organic acids but could be explained based on the trend of Hammet function σ of these salts themselves relative to the corresponding benzoate salt.     

Graft polymerization of acrylic acid onto starch using potassium permanganate acid (redox system)

Graft polymerization of acrylic acid (AA) onto rice starch using postassium permanganate/acid redox system as initiator was investigated. When starch was reacted with KMnO₄ solution, MnO₂ was deposited onto starch. The dependence of MnO₂ amount deposited was directly related to KMnO₄ concentration. Subjecting the MnO₂-containing starch to a solution consisting of monomer (AA) and acid (citric, tartaric, oxalic and hydrochloric acid) formed poly(AA)–starch graft copolymers. The graft yield, expressed as meq COOH/100 g starch, was measured by the amount of MnO₂ deposited, AA concentration, material-to-liquor ratio, kind and concentration of acid, as well as temperature and duration. Finally, the newly prepared poly(AA)–starch graft copolymers were applied to cotton textiles to determine their suitability as sizing agents. The highest graft yield was obtained with citric acid and the least with hydrochloric acid, with tartaric and oxalic acid in between. The graft yield increased by increasing the concentration of acid to a certain concentration beyond which grafting leveled off. A similar trend was observed when the magnitude of grafting was related to the amount of MnO₂ deposited. The graft yield increased by increasing the polymerization temperature from 30° to 50°C. Increasing the temperature to 60°C is accompanied by decreased grafting. On the other hand, fabric samples sized with poly(AA)–starch graft copolymers acquire higher tensile strength, elongation at break, and abrasion resistance than that sized with native rice starch, i.e., poly(AA)–starch graft copolymers serve as good sizing agents for cotton textiles. A tentative mechanism for grafting rice starch with AA using the KMnO₄/acid redox system was elucidated. © 1995 John Wiley & Sons, Inc.     

Recognizing arabic handwritten characters using deep learning and genetic algorithms

Automated techniques for Arabic content recognition are at a beginning period contrasted with their partners for the Latin and Chinese contents recognition. There is a bulk of handwritten Arabic archives available in libraries, data centers, historical centers, and workplaces. Digitization of these documents facilitates (1) to preserve and transfer the country’s history electronically, (2) to save the physical storage space, (3) to proper handling of the documents, and (4) to enhance the retrieval of information through the Internet and other mediums. Arabic handwritten character recognition (AHCR) systems face several challenges including the unlimited variations in human handwriting and the leakage of large and public databases. In the current study, the segmentation and recognition phases are addressed. The text segmentation challenges and a set of solutions for each challenge are presented. The convolutional neural network (CNN), deep learning approach, is used in the recognition phase. The usage of CNN leads to significant improvements across different machine learning classification algorithms. It facilitates the automatic feature extraction of images. 14 different native CNN architectures are proposed after a set of try-and-error trials. They are trained and tested on the HMBD database that contains 54,115 of the handwritten Arabic characters. Experiments are performed on the native CNN architectures and the best-reported testing accuracy is 91.96%. A transfer learning (TF) and genetic algorithm (GA) approach named “HMB-AHCR-DLGA” is suggested to optimize the training parameters and hyperparameters in the recognition phase. The pre-trained CNN models (VGG16, VGG19, and MobileNetV2) are used in the later approach. Five optimization experiments are performed and the best combinations are reported. The highest reported testing accuracy is 92.88%.

     

Coronavirus disease 2019 (COVID-19): survival analysis using deep learning and Cox regression model

Pattern Analysis and Applications - Coronavirus (COVID-19) is one of the most serious problems that has caused stopping the wheel of life all over the world. It is widely spread to the extent that...     

Application of Different Frequency Domain Detectors in Radar Moving Target Detection

Moving target detection (MTD) technique is designed to filtering out the clutters. The basis of the MTD digital signal processor is a bank of Doppler filters designed using FFT algorithm. For high pulse repetition frequency (HPRF), it leads to a long time calculations and great complexity in hardware implementation. Frequency domain detector is represented by Welch method Realized Doppler filters bank which will reduce the time calculation. The proposed method enhances the target detection capabilities by p...     

Quantitative analysis of packet-processing applications regarding architectural guidelines for network-processing-engine development

This paper presents a simulation-based profile-driven quantitative analysis of packet-processing applications. In this domain, demands for increasing the performance and the ongoing development of network protocols both call for flexible and performance-optimized engines. Based on the achieved profiling results, we introduce platform-independent analysis that locates the performance bottlenecks and architectural challenges of a packet-processing engine. Finally based on these results, we extract helpful architectural guidelines for design of a flexible and high-performance embedded processor that is optimized for packet-processing operations in high-performance and cost-sensitive network embedded applications.     

Counting eosinophils in bronchoalveolar lavage fluid images with fuzzy methodology

This paper proposes a new fuzzy approach to count eosinophils, as a measure of inflammation, in bronchoalveolar lavage fluid images, provided by digital camera through microscope. We use fuzzy cluster analysis and fuzzy classification algorithm to determine the number of objects in an image. For this purpose, a fuzzy image processing procedure consisting of five main stages is presented. The first stage is pre-highlighting the objects in the images by using an image pre-processing method for enhancement, which is sharpening the image with the Laplaian high pass filter in order to have acceptable contrast in the image. The second stage is segmentation by clustering with fuzzy c-mean algorithm for portioning. In this stage the clustered data are the rough symbols of objects in the image containing noise. In the third step, first, a Gaussian low pass filter is used for noise reduction. Then, a contrast adoption in the image is done by modifying the membership functions in the image [H.R. Tizhoosh, G. Krell, B. Michaelis, Knowledge-based enhancement of megavoltage images in radiation therapy using a hybrid neuro-fuzzy system, Image and Vision Computing 19(July) (2000) 217–233]. Object recognition, the fourth stage, will be done by using fuzzy labeling for the objects in the image, using a fuzzy classification method. The number of labeled images shows the number of eosinophils in an image which is an index for diagnosing inflammation. The last stage is tuning parameters and verification of the system performance by using a feed forward Neural Network.     

A single-phase p-type ac–ac converter with reduced components count and high boost factor

This paper proposes a new single-phase direct step-up ac–ac converter by modifying the p-type impedance source. It provides a high boost factor as well as high efficiency, while only six parts are required to design it, involving just two bidirectional power switches. A safe commutation method has been applied to power switches to make the converter snubber-free and high efficient. Input and output harmonic filters are no longer required since input and output currents variate continuously with small ripple and low total harmonic distortion (THD). The proposed topology only modulates the output voltage amplitude, not the phase and frequency, so the output frequency is identical to the input frequency and constant. Thus, it can be utilized in step-up conversion applications, like inductive power transmission from low ac voltage sources. Input and output have the same ground, which is a good protective feature. In this paper, the operating principle of the converter is demonstrated. Experimental results have been represented to evaluate the performance of the converter. For this purpose, an experimental prototype has been fabricated. Results are investigated and compared with other previous step-up ac–ac converters. Results confirm the theory, operating principle, and performance of the converter.