Preparation and optimisation of liposome‐in‐alginate beads containing oyster hydrolysate for sustained release

Oyster (Crassostrea gigas) hydrolysate shows antihypertensive effect in our previous study. Oral administration of oyster hydrolysate can loss bioactive peptides due to enzymatic degradation in vivo. To maximise its bioavailability, liposome‐in‐alginate (LA) beads were used to encapsulate the oyster hydrolysates to protect from degradation and obtain sustained release. The preparation conditions of the LA beads were optimised by response surface method using a model peptide of tyrosylalanine (YA). Their characterisation, swelling and release properties were investigated. The optimised conditions for the concentration of calcium chloride, sodium alginate and the amount of ethanol‐dissolved lecithin (EDL) were 0.5 m , 3% and 95.4 mg, respectively. The encapsulation efficiencies of YA and the oyster hydrolysate in the optimised condition were 74.9% and 84.3%, respectively. The release time of the oyster hydrolysate in the simulated gastrointestinal fluid was up to 16 h. The LA beads can be recommended to encapsulate oyster hydrolysate for bioavailability improvement.     

Managing Clouds, Smart Networks and Services: A Report on APNOMS 2011

This article presents a report on APNOMS 2011, which was held September 21–23, 2011 in Taipei, Taiwan. The theme of APNOMS 2011 was “Managing Clouds, Smart Networks and Services.”     

The Kurosawa-Desmedt key encapsulation is not chosen-ciphertext secure

At CRYPTO 2004, Kurosawa and Desmedt presented a new hybrid encryption scheme that is chosen-ciphertext (CCA2) secure in the standard model. Until now it was unknown if the key encapsulation part of the Kurosawa-Desmedt scheme by itself is still CCA2-secure or not. In this note we answer this question to the negative, namely we present a simple CCA2 attack on the Kurosawa-Desmedt key encapsulation mechanism. Our attack further supports the design paradigm of Kurosawa and Desmedt to build CCA2-secure hybrid encryption from weak key encapsulation.     

Moving average correction method for compensation of differential column shortenings in high‐rise buildings

The differential length changes of vertical members in a high‐rise building due to elastic, creep and shrinkage shortenings are of primary concern since the differential shortening of the vertical members causes unexpected damages on structural and nonstructural members. In contrast to researches on prediction methods for calculation of the amount of the shortenings, only few methods or algorithms of compensation of the differential column shortenings have been reported. In this paper, a practical compensation method using moving average correction is presented. The proposed method is applied to the compensation of the differential shortenings of the vertical members in a 70‐story high‐rise building. The performance of the moving average correction method is compared with the optimal compensation method based on simulated annealing algorithm. It is demonstrated that the magnitude of the differential shortening or the degree of the slab tilt due to the length changes in the vertical members can be controlled without using structural optimization techniques. Copyright © 2011 John Wiley & Sons, Ltd.     

Facile growth of 1‐D nanowire‐based WO3 thin films with enhanced photoelectrochemical performance

A flame reactor embedded with a constant tungsten wire feeding system to prepare one‐dimensional (1‐D) nanostructured tungsten oxide thin film for photoelectrochemical (PEC) water splitting was developed. Photoactive vertically‐aligned nanowire‐based WO₃ thin films could be obtained with a controlled thickness via a flame vapor deposition process followed by air‐annealing. The PEC performances of WO₃ photoelectrodes for different thin film thicknesses were examined. The optimum thickness of WO₃ thin film was found to be about 7.2 μm for PEC water splitting based on incident photon‐to‐current efficiency plots and I–V curves. The WO₃ prepared with optimum thickness showed better PEC performance than those of recently reported nanostructured WO₃ photoanodes. © 2015 American Institute of Chemical Engineers AIChE J, 62: 421–428, 2016     

Preparation of Pt/C cathode catalyst supported on chestnut-like mesoporous carbon for fuel cell applications

Fuel cells have received worldwide attention as a next-generation renewable energy technology. However, catalyst cost and durability are the main issue hampering the commercialization of fuel cells. Many studies have focused on the physicochemical properties of the carbon support to improve the catalyst’s properties. Mesoporous carbons are suitable candidates because of their appropriate structural characteristics, including high surface area, large pore size, and regularly interconnected mesopores that permit efficient diffusion of the reactants and by-products. In this study, supports made from chestnut-like carbon consisting of platelet carbon nanofibers were fabricated by selective catalytic gasification of activated carbon. Pt/C catalysts were synthesized from these support structures using the impregnation method. Catalyst performance and characteristics were investigated by N₂ adsorption/desorption isotherms, X-ray diffractions, and the rotating disk electrode technique for the oxygen reduction reaction.     

Application of Gurson Model for Evaluation of Density‐Dependent Mechanical Behavior of Polyurethane Foam: Comparative Study on Explicit and Implicit Method

Recently, liquefied natural gas (LNG) is a focus of interest around the world for several reasons, and LNG cargo containment systems (CCS) increase in quality to prevent loss of LNG during shipping. For insulation of CCS, polyurethane foam (PUF), an outstanding insulation material, is commonly used. However, until now, although its mechanical properties are relatively good, the material is not considered as a structural member under compressive loading, principal load direction in CCS. Moreover, as PUF is a porous material by mixing and foaming, its mechanical properties depend on voids, which is a dominant parameter for density. Therefore, in the present study, nonlinear behavior of PUF is described using Gurson model with a novel technique, i.e., an acceleration factor. The model expresses the behavior through the volume fraction of voids with consideration of the density effect to evaluate structural performance using user‐defined material subroutine with explicit and implicit methods.

     

Shear Thinning Behavior of Calcium Silicate‐Based Mold Fluxes at 1623 K

There have been consistent efforts on understanding rheological behavior of molten mold flux, used in continuous casting of steels. It is prevalent view that molten mold flux shows non‐Newtonian behavior, meaning that the viscosity varies with shear rate history. Hence, the present study attempts to evaluate shear thinning, which is one of the characteristic non‐Newtonian behaviors, by measuring its viscosity with a rotating type viscometer at 1623 K. Furthermore, Raman spectroscopy analysis is used to appreciate the structure of molten mold flux and shear thinning. Mold fluxes tested reveal definite shear thinning characteristic of decreasing viscosity with increasing shear rate. The degree of shear thinning has been well quantified by Oswald‐De Waele power law model. Lastly, the degree of polymerization, obtained from Raman spectroscopic data has proportional relationship with degree of shear thinning in the range of 1–5 s^?1 shear rate. Also, it has a downward parabolic relationship with degree of shear thinning at entire shear rate ranges up to 100 s^?1. This study also verifies possibility to use shear thinning behavior on actual continuous casting process.     

Characterization of Cu(In,Ga)Se2 thin films prepared by RF magnetron sputtering using a single target without selenization

Cu(In_1?xGa_x)Se₂ (CIGS) thin films were prepared using a single quaternary target by RF magnetron sputtering. The effects of deposition parameters on the structural, compositional and electrical properties of the films were examined in order to develop the deposition process without post-deposition selenization. From X-ray diffraction analysis, as the substrate temperature and Ar pressure increased and RF power decreased, the crystallinity of the films improved. The scanning electron microscopy revealed that the grains became uniform and circular shape with columnar structure with increasing the substrate temperature and Ar pressure, and decreasing the RF power. The carrier concentration of CIGS films deposited at the substrate temperature of 500 °C was 2.1 × 10¹⁷ cm^?3 and the resistivity was 27 Ω cm. At the substrate temperature above 500 °C, In and Se contents in CIGS films decreased due to the evaporation and it led to the deterioration of crystallinity. It was confirmed that CIGS thin films deposited at optimal condition had similar atomic ratio to the target value even without post-deposition selenization process.