Bioconversion of shrimp shell waste for the production of antioxidant and chitosan used as fruit juice clarifier

The pH, proteolytic activity, extent of demineralisation and deprotenisation of shrimp waste were studied during 7 days of fermentation using Pseudomonas aeruginosa A2. After 3 days, pH dropped from 7.0 to 4.4 and then remained constant. Simultaneously, a demineralisation of 92% was achieved. However, protease activity reached its highest level (1230 U mL^?1) after 1 day of incubation, and a protein removal of 90% was achieved. Chitin obtained was converted to chitosan. This chitosan, with 73% deacetylation, was tested for clarification of different fruit juices. It was observed that low concentrations of chitosan (below to 1%) greatly increase the clarity of juices without affecting the nutritional value. The antioxidant activity of the hydrolysates produced during fermentation was tested. Hydrolysate obtained after 3 days showed the strongest scavenging activity (90%), which was comparable to the positive control BHA; however, that obtained after 1 day exhibited the highest ferric‐reducing antioxidant power (OD 700 nm = 1.7).     

Inhibition of humic substances mediated photooxygenation of furfuryl alcohol by 2,4,6-trimethylphenol. Evidence for reactivity of the phenol with humic triplet excited states

To probe the reactivity of 2,4,6-trimethylphenol with humic triplet excited states, we investigated its influence on the humic substances-mediated photooxygenation offurfuryl alcohol. Elliott soil humic and fulvic acids were employed for these experiments. When added in the concentration range of 10(-4) - 10(-3) M, 2,4,6-trimethylphenol inhibited furfuryl alcohol photooxygenation to an extent depending on its concentration. The inhibiting effect decreased as the oxygen concentration was increased. By postulating that 2,4,6-trimethylphenol competes with oxygen for reaction with humic triplet excited states and with furfuryl alcohol for reaction with singlet oxygen, we obtained kinetic laws describing the consumption profiles of furfuryl alcohol and 2,4,6-trimethylphenol. Experimental rates of 2,4,6-trimethylphenol and furfuryl alcohol loss could be satisfactorily fitted with 1.09-1.16 for the ratio k2/k3, where k2 and k3 are the reaction rate constants of humic triplet excited states with oxygen and 2,4,6-trimethylphenol, respectively. These types of experiments could be extended to a variety of substrates to measure their reaction rate constants with humic triplet excited states.     

pH Responsive Abelmoschus esculentus Mucilage and Administration of Methotrexate: In-Vitro Antitumor and In-Vivo Toxicity Evaluation

The rapid progression in biomaterial nanotechnology apprehends the potential of non-toxic and potent polysaccharide delivery modules to overcome oral chemotherapeutic challenges. The present study is aimed to design, fabricate and characterize polysaccharide nanoparticles for methotrexate (MTX) delivery. The nanoparticles (NPs) were prepared by Abelmoschus esculentus mucilage (AEM) and chitosan (CS) by the modified coacervation method, followed by ultra-sonification. The NPs showed much better pharmaceutical properties with a spherical shape and smooth surface of 213.4–254.2 nm with PDI ranging between 0.279–0.485 size with entrapment efficiency varying from 42.08 ± 1.2 to 72.23 ± 2.0. The results revealed NPs to possess positive zeta potential and a low polydispersity index (PDI). The in-vitro drug release showed a sustained release of the drug up to 32 h with pH-dependence. Blank AEM -CS NPs showed no in-vivo toxicity for a time duration of 14 days, accompanied by high cytotoxic effects of optimized MTX loaded NPs against MCF-7 and MD-MBA231 cells by MTT assay. In conclusion, the findings advocated the therapeutic potential of AEM/CS NPs as an efficacious tool, offering a new perspective for pH-responsive routing of anticancer drugs with tumor cells as a target.     

Rapid and efficient hand gestures recognizer based on classes discriminator wavelet networks

Multimedia Tools and Applications - The vision based on hand gesture recognition is one of the key challenges in behavior understanding and computer vision. It offers to machines the possibility of...     

Removal of Ag(l), Cu(II) and Zn(ll) ions with a supported liquid membrane containing cryptands as carriers

The interface behaviour in the facilitated co-transport of Ag(I), Cu(II) and Zn(II) ions through supported liquid membranes (SLMs) made of a flat-sheet polypropylene membrane support containing cryptands (2.2.2 or 2.2.1) as carriers was studied. The liquid-liquid extraction tests showed a maximum distribution coefficient when the carrier concentration was greaterthan 10⁻⁴M. In transport experiments the transmembrane flux increased with increasing carrier concentration reaching a limiting value at greater than 10⁻³M concentration. The calculation ofthe diffusion coefficients in membranes showed ahigherdiffusivityof2.2.2-metal complexes with respect to 2.2.1-metal complexes for silver ions. A sequence of diffusivity D(Ag+)>D(Cu²⁺)>D(Zn²⁺) was obtained, but carrier 2.2.1 showed a higher selectivity through copper ions. A sequence of diffusivity D(Cu²⁺)>D(Zn²⁺)>D(Ag⁺) was obtained. The diffusivity was significantly higher when using Celgard 2500 support compared to Celgard 2400 or 2402. Variable metal ion concentrations in the feed phase fluxes almost zero, at less than 10⁻² M concentration, were obtained. In the transient state of the transport through the SLM, different molar flow rates at the feed-membrane and membrane-strip interfaces were observed. The selectivity of the interfaces containing 2.2.2 in the separation binary mixtures of ions showed the following separation factors: SF_AgZn = 2.50, SF_AgCu = 1.64, SF_cuZn = 1.42.     

Effect of CsBr–MnCl2 mixed fillers on the crystal structure and optical and electrical properties of poly(vinyl alcohol)

Poly(vinyl alcohol) (PVA) films filled with (x)CsBr(15 ? x)MnCl₂, where 0.0 ≤ x ≤ 15%, were prepared by a casting technique. The crystal structure properties of the prepared films were examined by XRD, DTA, and FTIR. A correlation between XRD, DTA, and FTIR of the filled polymer was discussed. Optical absorption measurements revealed two optical band gaps (E_g1 and E_g2). The electrical properties were studied using dc electrical conductivity. The filling level (FL) dependency of E_g1 and E_g2, thermal activation energy (ΔE), and hopping distance (R₀) are given to illustrate the behavior of the filled polymers. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 94: 2178–2186, 2004     

Synthesis and characterization of cellulose triacetate and poly(ethylene imine) membranes containing a polyether macrobicyclic: Their application to the separation of copper(II) and silver(I) ions

A cellulose triacetate (CTA)–poly(ethylene imine) (PEI) membrane containing a polyether macrobicyclic (cryptand) as a carrier and 2‐nitrophenyloctyl ether (NPOE) as a plasticizer was prepared. The CTA–PEI–cryptand–NPOE membrane was characterized with chemical techniques as well as Fourier transform infrared, X‐ray diffraction, differential scanning calorimetry, and scanning electron microscopy. The permeation of silver and copper ions through the CTA–PEI–cryptand–NPOE membrane was comparable to that through a supported liquid membrane. © 2004 Wiley Periodicals, Inc. J Appl Polym Sci 93: 1401–1410, 2004     

Characterization of artisanally and semiautomatically extracted argan oils from Morocco

The present study was conducted to know the possible influence of the seed treatment, method of extraction and geographical origin on the quality and chemical composition of argan oil. Artisanally and semiautomatically extracted argan oils, from roasted and unroasted seeds, from interior and coast areas, were studied. The quality parameters analyzed were acid value, peroxide value, K₂₃₂ and K₂₇₀, triacylglycerols and fatty acid composition, polar compounds, total phenols, tocopherol content and oil stability index (OSI). Seed treatment and extraction method showed a higher influence on quality parameters than geographical area; the quality parameters of the different oils were discussed. The total phenolic content in all analyzed samples was lower than 10 ppm. γ‐Tocopherol was the major tocopherol (84.4–86.4%) with a high contribution to the total tocopherol content (383–485 ppm). The OSI of the argan oil samples were well correlated (R = 0.97) with the tocopherol contents. The argan oil samples obtained from roasted seeds presented higher stability (26–38 h) than the oils from unroasted seeds (16–32 h).     

Characterization of Urine Stem Cell-Derived Extracellular Vesicles Reveals B Cell Stimulating Cargo

Elucidation of the biological functions of extracellular vesicles (EVs) and their potential roles in physiological and pathological processes is an expanding field of research. In this study, we characterized USC–derived EVs and studied their capacity to modulate the human immune response in vitro. We found that the USC–derived EVs are a heterogeneous population, ranging in size from that of micro–vesicles (150 nm–1 μm) down to that of exosomes (60–150 nm). Regarding their immunomodulatory functions, we found that upon isolation, the EVs (60–150 nm) induced B cell proliferation and IgM antibody secretion. Analysis of the EV contents unexpectedly revealed the presence of BAFF, APRIL, IL–6, and CD40L, all known to play a central role in B cell stimulation, differentiation, and humoral immunity. In regard to their effect on T cell functions, they resembled the function of mesenchymal stem cell (MSC)–derived EVs previously described, suppressing T cell response to activation. The finding that USC–derived EVs transport a potent bioactive cargo opens the door to a novel therapeutic avenue for boosting B cell responses in immunodeficiency or cancer.