A study on melt recycling of bio-based polypropylene/thermoplastic starch compound

The compulsion to use bioplastics has increased significantly today. One of the important aspects of plastics is their recyclability. Therefore, the important question of this research is that although bio-based compounds containing starch are sensitive to thermal-mechanical recycling processes, are such products thermally recyclable? To answer the question, polypropylene (PP)/thermoplastic starch (TPS) compound granules were extruded up to five times, and in the other part, single-extruded granules were blended at different ratios with virgin granules by extrusion. In order to characterize these samples, Fourier transform infrared spectroscopy, thermogravimetric analysis, differential scanning calorimetry, rotational disc rheometry, tensile properties, and appearance evaluation were used. The results showed that it is possible to recycle PP/TPS granules up to four times repetition of the extrusion operation and the fifth repetition also showed slight changes. There was also a blend of single-extruded granules with virgin material up to a 50:50% composition without significant variation.     

An extended PID type iterative learning control

This paper presents a new iterative learning control (ILC) for discrete-time single-input single-output (SISO) linear time-invariant (LTI) systems. To establish this ILC, the input of the controlled system is modified by using a novel four-parametric algorithm. This algorithm is called the extended proportional plus integral and derivative (EPID) type, since by eliminating the fourth parameter of it one would get to the PID type ILC, therefore PID type ILC is a special case of it. The convergence of the proposed ILC is analyzed and an optimal method is presented to determine its parameters. It is shown that the given ILC has a better performance than the PID-type one. Three illustrative examples are included to demonstrate the effectiveness and the preference of the presented ILC.     

Earthquake onset detection using spectro-ratio on multi-threshold time–frequency sub-band

Automatic onset detection and picking algorithm has been proposed by applying the spectro-ratio on time–frequency sub-band. The proposed algorithm does not need any parameter settings as it will work on data generated by either short or very broad band seismometers. Our algorithm is applied on local events from Cairo region recorded by three stations of the Egyptian National Seismic Network (ENSN). Maximum standard deviation is observed to be 0.113 s of the corresponding manual picks made by analysts.     

Design and simulation of autonomous military vehicle control system based on machine vision and ensemble movement approach

The Journal of Supercomputing - On the battlefield, early detection of armored vehicles can have a positive effect. Because according to this issue, timely and appropriate reactions can be done....     

Recovery of sensor embedded washing machines using a multi-kanban controlled disassembly line

Product recovery involves the recovery of materials and components from returned or end-of-life products. Disassembly, an element of product recovery, is the systematic separation of an assembly into its components, subassemblies or other groupings. Stricter environmental regulations together with dramatic decrease in natural resources and landfills have increased the importance of disassembly as all product recovery options require some level of disassembly. Due to changes made during the lifetime of a product by customers or service personnel, the number and the version of components prior to disassembly is unknown. Customers may also discriminate between and demand different versions of components. The existence of non-functional components further adds to the uncertainty associated with disassembly yield. Sensors implanted into products during their production can address this uncertainty by providing information on the number, condition and version of components prior to disassembly. In this study, we evaluate the impact of sensor embedded products (SEPs) on the various performance measures of a washing machine (WM) disassembly line controlled by a multi-kanban system, which takes into consideration the highly stochastic behavior of the line while managing material and kanban flows. First, separate design of experiments studies based on orthogonal arrays are performed for conventional products and SEPs. In order to observe the response of each experiment, detailed discrete event simulation (DES) models for both types of products are developed considering the precedence relationships among the components of a WM. Then, pair-wise t-tests are conducted to compare the two cases based on different performance measures. According to the results, SEPs provide significant reductions in all costs (viz., backorder, holding, disassembly, disposal, testing and transportation) while increasing revenue and profit.     

Assessing tropical cyclone impacts using object-based moderate spatial resolution image analysis: a case study in Bangladesh

The environmental and societal impacts of tropical cyclones could be reduced using a range of management initiatives. Remote sensing can be a cost effective, accurate, and potential tool for mapping the multiple impacts caused by tropical cyclones using high-to-moderate spatial resolution (5–30 m) satellite imagery to provide data on the following essential parameters – evacuation, relief, and management of natural resources. This study developed and evaluated an approach for assessing the impacts of tropical cyclones through object-based image analysis and moderate spatial resolution imagery. Pre- and post-cyclone maps of artificial and natural features are required for assessing the overall impacts in the landscape that could be acquired by mapping specific land cover types. We used the object-based approach to map land-cover types in pre- and post-cyclone Satellite Pour l’Observation de la Terre (SPOT) 5 image data and the post-classification comparison technique to identify changes in the particular features in the landscape. Cyclone Sidr (2007) was used to test the applicability of this approach in Sarankhola Upazila in Bangladesh. The object-based approach provided accurate results for classifying features from pre- and post-cyclone satellite images with an overall accuracy of 95.43% and 93.27%, respectively. Mapped changes identified the extent, type, and form of cyclone induced impacts. Our results indicate that 63.15% of the study area was significantly affected by cyclone Sidr. The majority of mapped damage was found in vegetation, cropped lands, settlements, and infrastructure. The damage results were verified through the high spatial resolution satellite imagery, reports and pictures that were taken after the cyclone. The methods developed may be used in future to assess the multiple impacts caused by tropical cyclones in Bangladesh and other similar environments for the purposes of tropical cyclone disaster management.     

Robust adaptive boundary control of a perturbed hybrid Euler-Bernoulli beam with coupled rigid and flexible motion

In this paper, a robust adaptive boundary controller is proposed to stabilize the coupled rigid-flexible motion of an Euler-Bernoulli beam in presence of boundary and distributed perturbations. Applying Hamilton’s principle, the dynamics of the hybrid beam model, including the actuators hub and the payload at its ends, is represented through four nonhomogeneous nonlinear partial differential equations (PDEs) subject to ordinary differential equations (ODEs) of boundary conditions. Using a Lyapunov-based control synthesis procedure, a robust nonlinear boundary controller is established that asymptotically stabilizes the perturbed beam vibration while regulating the rigid motion coordinates. A redesign of the proposed control laws produces a robust adaptive boundary controller that achieves control objectives in the presence of both parametric and modelling uncertainties. Control design is directly based on system PDEs without truncating the model so that instabilities from spillover effects are mitigated. The control inputs to the beam consist of three forces/torque applied to the actuators hub and a transverse force applied to the tip payload. Simulation results are used to investigate the efficiency of the proposed approach.

     

Impact of sedimentation on groundwater recharge at Sahalanowt Dam,Salalah, Oman

Recharge dams in Oman detain floods to recharge groundwater. The impact of sedimentation on recharge at Wadi Sahalanowt Recharge Dam, in Salalah, Oman, was evaluated using field data and numerical modelling. Analysis of the thickness of sediments after flood events shows that maximum depositions were at the same locations after each event, coinciding with the lowest positions in the wadi. Numerical modelling suggests that the current practice of periodic removal of sediments will restore the storage capacity of the reservoir, but that ploughing or raking of the underlying native sedimentary rocks could be required to significantly improve infiltration rates.