Semi-Supervised Deep Learning for Multi-Tissue Segmentation from Multi-Contrast MRI

Journal of Signal Processing Systems - Segmentation of thigh tissues (muscle, fat, inter-muscular adipose tissue (IMAT), bone, and bone marrow) from magnetic resonance imaging (MRI) scans is useful...     

Investigating the effect of varying block size on power and energy consumption of GPU kernels

The Journal of Supercomputing - Power consumption is likely to remain a significant concern for exascale performance in the foreseeable future. In addition, graphics processing units (GPUs) have...     

Design of backpropagated neurocomputing paradigm for Stuxnet virus dynamics in control infrastructure

Neural Computing and Applications - In the present study, a novel application of backpropagated neurocomputing heuristics (BNCH) is presented for epidemic virus model that portrays the Stuxnet...     

The Double Edge Sword Based Distributed Executor Service

Scalability is one of the most important quality attribute of software-intensive systems, because it maintains an effective performance parallel to the large fluctuating and sometimes unpredictable workload. In order to achieve scalability, thread pool system (TPS) (which is also known as executor service) has been used extensively as a middleware service in software-intensive systems. TPS optimization is a challenging problem that determines the optimal size of thread pool dynamically on runtime. In case of distributed-TPS (DTPS), another issue is the load balancing b/w available set of TPSs running at backend servers. Existing DTPSs are overloaded either due to an inappropriate TPS optimization strategy at backend servers or improper load balancing scheme that cannot quickly recover an overload. Consequently, the performance of software-intensive system is suffered. Thus, in this paper, we propose a new DTPS that follows the collaborative round robin load balancing that has the effect of a double-edge sword. On the one hand, it effectively performs the load balancing (in case of overload situation) among available TPSs by a fast overload recovery procedure that decelerates the load on the overloaded TPSs up to their capacities and shifts the remaining load towards other gracefully running TPSs. And on the other hand, its robust load deceleration technique which is applied to an overloaded TPS sets an appropriate upper bound of thread pool size, because the pool size in each TPS is kept equal to the request rate on it, hence dynamically optimizes TPS. We evaluated the results of the proposed system against state of the art DTPSs by a client-server based simulator and found that our system outperformed by sustaining smaller response times.     

Amended hybrid multi-verse optimizer with genetic algorithm for solving task scheduling problem in cloud computing

The Journal of Supercomputing - The central cloud facilities based on virtual machines offer many benefits to reduce the scheduling costs and improve service availability and accessibility. The...     

High-feed turning of AISI D2 tool steel using multi-radii tool inserts: Tool life,material removed,and workpiece surface integrity evaluation

Multi-radii tool inserts offer novel configuration that comprises of multiple radii at tool nose. A review of the available literature indicates that there exists a need for experimental investigation on certain key machining characteristics of such tools. This paper reports on tool wear/life, material removed, and workpiece surface roughness when multi-radii mixed alumina TiN coated tool inserts are employed for turning D2 steel. Inserts of three different nose radii (0.40, 0.80, 1.20?mm) at six levels of feed rates (ranging from 0.157 to 0.562?mm/rev) are used. Results show that flank wear is the dominant wear mode with catastrophic tool failure occurring at highest nose radius (1.20?mm) and feed rate (0.562?mm/rev) combination. Also, there is ～59% reduction in tool life accompanied by ～62% increase in quantity of material removed as the feed rate increases from 0.157 to 0.562?mm/rev at maximum nose radius (1.20?mm). Feed rate is found to be statistically significant factor for all three responses considered herein at 95% confidence level. Surface integrity assessment at maximum feed rate reveals presence of a strain hardened layer extending to the depth of 150?µm below the machined surface without any observance of white layer for all the tool conditions and nose radius.     

Theoretical Investigation of Cubic BaVO<Subscript>3</Subscript> and LaVO<Subscript>3</Subscript> Perovskites via Tran–Blaha-Modified Becke–Johnson Exchange Potential Approach

The full potential linearized augmented plane wave method of density functional theory has been used to investigate the structural, electronic, magnetic and thermoelectric properties of cubic perovskites BaVO₃ and LaVO₃. The ferromagnetic ground state has been found to be stable by comparing the total energies of non-spin-polarized and spin-polarized calculations performed for optimized unit cells. For both compounds, the bond length and tolerance factor are also measured. From the band structures and density of states plots, it is found that both compounds are half-metallic. We found that the presence of V at the octahedral site of these perovskites develops exchange splitting through p-d hybridization, which results in a stable ferromagnetic state. The observed exchange splitting is further clarified from the magnetic moment, charge and spin of the anion and cations. Finally, we also presented the calculated thermoelectric properties of these materials, which show that half-metallic BaVO₃ and LaVO₃ materials are potential contenders for thermoelectric applications.     

Insights into the Influence of Work Functions of Cathodes on Efficiencies of Perovskite Solar Cells

Though various efforts on modification of electrodes are still undertaken to improve the efficiency of perovskite solar cells, attributing to the large scope of these methods, it is of significance to unveil the working principle systematically. Herein, inverted perovskite solar cells based on indium tin oxide (ITO)/poly(3,4‐ethylenedioxythiophene) polystyrene sulfonate (PEDOT:PSS)/CH₃NH₃PbI₃/phenyl‐C61‐butyric acid methyl ester (PC₆₁ BM)/buffer metal/Al are constructed. Through the choice of different buffer metals to tune work function of the cathode, the contact nature of the active layer with the cathode could be manipulated well. In comparison with the device using Au/Al as the electrode that shows an unfavorable band bending for conducting the excited electrons to the cathode, the one with Ca/Al presents a dramatically improved efficiency over 17.1%, ascribed to the favorable band bending at the interface of the cathode with the active layer. Details for tuning the band bending and the corresponding charge transfer mechanism are given in a systematic manner. Thus, a general guideline for constructing perovskite photovoltaic devices efficiently is provided.     

Trimetallic PtCoFe Alloy Monolayer Superlattices as Bifunctional Oxygen‐Reduction and Ethanol‐Oxidation Electrocatalysts

A synthesis strategy for the preparation of trimetallic PtCoFe alloy nanoparticle superlattices is reported. Trimetallic PtCoFe alloy monolayer array of nanoparticle superlattices with a large density of high index facets and platinum‐rich surface are successfully prepared by coreduction of metal precursors in formamide solvent. The concentration of cetyl trimethyl ammonium bromide plays a vital role for the formation of a monolayer array of nanoparticle superlattices, while the size of nanoparticles is determined by NaI. The prepared monolayer array of nanoparticle superlattices is the superior catalyst for oxygen reduction reaction as well as for ethanol oxidation owing to their specific structural and compositional characteristics.