A novel approach to high-level switching activity modeling withapplications to low-power DSP system synthesis

We address high-level synthesis of low-power digital signal processing (DSP) systems by using efficient switching activity models. We present a technology-independent hierarchical scheme that can be easily integrated into current communications/DSP CAD tools for comparing the relative power/performance of two competing DSP designs without specific knowledge of transistor-level details. The basic building blocks considered for such systems are a full adder, a half adder, and a one-bit delay. Estimates of the switching activity at the output of these primitives are used to model the activity in more complex building blocks of DSP systems. The presented hierarchical method is very fast and simple. The accuracy of estimates obtained using the proposed approach is shown to be within 4% of the results obtained using extensive bit-level simulations. Our approach shows that the choice of multiplier/multiplicand is important when using array multipliers in a datapath. If the input signal with smaller mean square value is chosen as the multiplicand, almost 20% savings in switching activity can be achieved. This observation is verified by an analog simulation using a 16 × 16 bit array multiplier implemented in a 0.6-μ process with 3.3 V supply voltage     

Large signal analysis of mixers with difference frequency injection

Large signal analysis of mixers excited by three tone signals is presented. The special case of two equal-amplitude sinusoids plus a difference-frequency injection is considered in detail and the results are compared, whenever possible, with previously published results. Contrary to previously published results, it is shown that even under large signal conditions and strong nonlinearity it is possible, at least in theory, to totally eliminate the third-order intermodulation when the amplitudes of the equal-amplitudes input sinusoids and the difference-frequency injection are equal.     

Cognitive Radio as the Facilitator for Advanced Communications Electronic Warfare Solutions

Throughout the 1990s, Software Defined Radio (SDR) technology was viewed almost exclusively as a solution for interoperability problems between various military standards, waveforms and devices. In the meantime, Cognitive Radio (CR) – a novel communication paradigm which embodies SDR with intelligence and self-reconfigurability properties – has emerged. Intelligence and on-the-fly self-reconfiguration abilities of CRs constitute an important next step in the Communications Electronic Warfare, as they may enable the jamming entities with the capabilities of devising and deploying advanced jamming tactics. Similarly, they may also aid the development of the advanced intelligent self-reconfigurable systems for jamming mitigation. This work outlines the development and implementation of the Spectrum Intelligence algorithm for Radio Frequency (RF) interference mitigation. The developed system is built upon the ideas of obtaining relevant spectrum-related data by using wideband energy detectors, performing narrowband waveform identification, extracting the waveforms’ parameters and properly classifying the waveforms. All relevant spectrum activities are continuously monitored and stored. Coupled with the self-reconfigurability of various transmission-related parameters, Spectrum Intelligence is the facilitator for the advanced interference mitigation strategies. The implementation is done on the Cognitive Radio test bed architecture which consists of two military Software Defined Radio terminals, each interconnected with the computationally powerful System-on-Module.     

Geometrical design of thin film photovoltaic modules for improved shade tolerance and performance

Partial shading in photovoltaic modules is an important reliability and performance concern for all photovoltaic technologies. In this paper, we show how cell geometry can be used as a design variable for improved shade tolerance and performance in monolithic thin film photovoltaic modules (TFPV). We use circuit simulations to illustrate the geometrical aspects of partial shading in typical monolithic TFPV modules with rectangular cells, and formulate rules for shade tolerant design. We show that the problem of partial shading can be overcome by modifying the cell shape and orientation, while preserving the module shape and output characteristics. We discuss two geometrical designs with cells arranged in radial and spiral patterns, which (i) prevent the reverse breakdown of partially shaded cells, (ii) improve the overall power output under partial shading, and (iii) in case of spiral design, may additionally improve the module efficiency by reducing sheet resistance losses. We compare these designs quantitatively using realistic parameters and discuss the practical aspects for their implementation. Copyright © 2013 John Wiley & Sons, Ltd.     

Interconnecting networks with optimized service provisioning

Telecommunication Systems - A recent trend of peering at geo-diversified Internet exchange points (IXPs) has empowered decades-old proposal of inter-networking and opened up new avenues of business...     

Microbiological survey of tofu sold in a rural Illinois county.

The purpose of this study was to determine the microbial status of tofu sold in a rural Illinois county and assess the factors contributing to the safety of tofu. Six brands of tofu from eight different stores (60 total samples) were purchased and analyzed for temperature, pH, total aerobic bacteria, and the presence of coliforms. Relationships between age, temperature, pH of tofu, and total aerobic bacteria were tested. An analysis of variance was also performed to test for differences in total bacterial counts among the brands. Mean aerobic bacterial counts ranged from 0 to 7.76 x 10(7) CFU/g. Fifty-five percent of the tofu tested fell within the excellent range for freshness as delineated by the standards developed by the Soyfoods Association of North America, 6.7% fell within the acceptable range, 6.7% within the marginal range, and 28% within the unacceptable range. Sixteen percent of the samples contained coliform bacteria. No significant correlation was found between variables, except pH with total aerobic bacterial counts (r = -0.51) and pH with eosin-methylene blue agar counts (r = -0.67). Most of the tofu was displayed at unsafe temperatures (>5 degrees C) for potentially hazardous foods. This study confirmed the concerns regarding safety of tofu sold in the grocery stores. Based on these results, special training on tofu storage and handling is recommended for grocery stores selling this food product.     

Structural,Thermal and Luminescence Properties of AlN:Tm Thin Films Deposited on Silicon Substrate and Optical Fiber

Semiconductors - Thin films of AlN:Tm are deposited on a Si(111) and Si(100) substrates and optical fiber by rf magnetron sputtering method. 200–400 nm thick films are deposited at various...     

Sustainable Green Fog Computing for Smart Agriculture

Wireless Personal Communications - Medical Body Area Networks or MBANs are gaining popularity in healthcare circles because of the convenience they provide to patients and caregivers and assist in...     

CuPc based organic--inorganic hetero-junction with Au electrodes

In present work, a hetero-junction of n-silicon (n-Si) with copper phthalocyanine (CuPc) has been fabricated. The current-voltage characteristics were investigated to explain the rectification and conduction mechanism. The effect of temperature and humidity on electrical properties of n-Si/CuPc hetero-junction has also been investigated. The characteristics of the junction have been observed to be temperature and humidity dependent so it is suggested that this junction can be used as temperature and humidity sensor.     

Search me if you can: Multiple mix zones with location privacy protection for mapping services

The mobile vehicle is gaining popularity nowadays using map services like Google Maps and other mapping services. However, map services users have to expose sensitive information like geographic locations (GPS coordinates) or address to personal privacy concerns as users share their locations and queries to obtain desired services. Existing mix zones location privacy protection methods are most general purposed and theoretical value while not applicable when applied to provide location privacy for map service users. In this paper, we present new (multiple mix zones location privacy protection) MMLPP method specially designed for map services on mobile vehicles over the road network. This method enables mobile vehicle users to query a route between 2 endpoints on the map, without revealing any confidential location and queries information. The basic idea is to strategically endpoints to nearby ones, such that (1) the semantic meanings encoded in these endpoints (eg, their GPS coordinates) change much, ie, location privacy is protected; (2) the routes returned by map services little change, ie, services usability are maintained. Specifically, a mobile client first privately retrieves point of interest close to the original endpoints, and then selects 2 points of interest as the shifted endpoints satisfying the property of geoindistinguishability. We evaluate our MMLPP approach road network application for GTMobiSim on different scales of map services and conduct experiments with real traces. Results show that MMLPP strikes a good balance between location privacy and service usability.