A reliable energy-efficient pressure-based routing protocol for underwater wireless sensor network

Recently, Underwater Wireless Sensor Networks (UWSNs) has witnessed significant attention from both academia and industries in research and development, due to the growing number of applications for wide range of purposes including commercial, scientific, environmental and military. Some of the major applications include pollution monitoring, tactical surveillance, tsunami warnings and offshore exploration. Efficient communication among sensors in UWSNs is a challenging task due to the harsh environments and peculiar characteristics of UWSNs. Therefore, design of routing protocol for efficient communication among sensors and sink is one of the fundamental research themes in UWSNs. In this context, this paper proposes a location-free Reliable and Energy efficient Pressure-Based Routing (RE-PBR) protocol for UWSNs. RE-PBR considers three parameters including link quality, depth and residual energy for balancing energy consumption and reliable data delivery. Specifically, link quality is estimated using triangle metric method. A light weight information acquisition algorithm is developed for efficient knowledge discovery of the network. Multi-metric data forwarding algorithm is designed based on route cost calculation which utilizes residual energy and link quality. Simulations are carried out in NS-2 with Aqua-Sim package to evaluate the performance of RE-PBR. The performance of the proposed protocol is compared with the stat-of-the-art techniques: DBR and EEDBR. The comprehensive performance evaluation attests the benefit of RE-PBR as compared to the state-of-the-art techniques in terms of network lifetime, energy consumption, end-to-end delay and packet delivery ratio.     

off-State Degradation in Drain-Extended NMOS Transistors: Interface Damage and Correlation to Dielectric Breakdown

Off-state degradation in drain-extended NMOS transistors is studied. Carefully designed experiments and well-calibrated simulations show that hot carriers, which are generated by impact ionization of surface band-to-band tunneling current, are responsible for interface damage during off-state stress. Classical on-state hot carrier degradation has historically been associated with broken equivSi-H bonds at the interface. In contrast, the off-state degradation in drain-extended devices is shown to be due to broken equivSi-O- bonds. The resultant degradation is universal, which enables a long-term extrapolation of device degradation at operating bias conditions based on short-term stress data. Time evolution of degradation due to broken equivSi-O- bonds and the resultant universal behavior is explained by a bond-dispersion model. Finally, we show that, under off-state stress conditions, the interface damage that is measured by charge-pumping technique is correlated with dielectric breakdown time, as both of them are driven by broken equivSi-O- bonds.     

Will New Antenna Materials Enable Single Path Multiple Access (SPMA)?

The aim of this paper is to introduce a novel frequency reuse concept especially for macro cellular networks to substantially increase the mobile network capacity, and simultaneously to avoid the implementation of low efficient small cells. Single path multiple access (SPMA) utilizes the characteristics of independent propagation paths for particular geographical location in the coverage area of mobile network. The proposed concept is based on the assumption that new approach will be adopted by the antenna manufacturers for producing advanced antennas by utilizing materials like metamaterials including carbon based nanotechnology, and graphene. In SPMA concept, communication between base station and mobile station happens through only single independent propagation path, and frequency resources can be reused in 5 m  \(\times \)  5 m areas or even more often in 1 m  \(\times \)  1 m areas, but limited by a base station/mobile station antenna requirement. Thus, the capacity of the network will be increased dramatically, and it can be managed in centralized manner at certain macro site locations. In already deployed cellular networks, these macro sites are mostly easily available, and that would help to implement SPMA to enhance the network capacity. Simulation results provided in this paper show the applicability of SPMA technique, by limiting the radiation of signal as single path propagation between base station and mobile station.     

Wireless LAN Access Point Placement Based on User Mobility

In a wide area campus, a university provides Wireless Local Area Network (WLAN) for users to connect to the Internet. Most users take advantage of this WLAN benefit by using their laptops. However, the number of smart phone users is growing fast. Since a smart phone is able to get an Internet connection using WLAN, users can use their smart phones without having to pay for a cellular operator. Users tend to use their smart phones more, due to their higher mobility compared to a laptop. This capability enables new services in the market, such as Fixed-Mobile Convergence (FMC), which integrates a fixed network (traditional telephony, WLAN) and a mobile network (cellular) to provide seamless voice communications anytime, anywhere. These new applications require a WLAN connection availability nearly everywhere. However, due to limited budgets, a university can only install APs in places with a high connection demand. We propose a novel WLAN AP placement technique that takes user mobility into consideration. This new approach is more complete than previous approaches, which mainly focus on coverage area and throughput data. Our technique has been implemented in our university. The results show the suitability of the WLAN access point locations in our university campus based on user mobility and activities.     

Interface state densities, low frequency noise and electron mobility in surface channel In0.53Ga0.47As n-MOSFETs with a ZrO2 gate dielectric

This paper reports on an investigation of interface state densities, low frequency noise and electron mobility in surface channel In_0.53Ga_0.47As n-MOSFETs with a ZrO₂ gate dielectric. Interface state density values of D_it ∼ 5 × 10¹² cm⁻² eV⁻¹ were extracted using sub-threshold slope analysis and charge pumping technique. The same order of magnitude of trap density was found from low frequency noise measurements. A peak effective electron mobility of 1200 cm²/Vs has been achieved. For these surface channel In_0.53Ga_0.47As n-MOSFETs, it was found that η parameter, an empirical parameter used to calculate the effective electric field, was ∼0.55, and is to be comparable to the standard value found in Si device.     

Sustainable Green Fog Computing for Smart Agriculture

Wireless Personal Communications - Medical Body Area Networks or MBANs are gaining popularity in healthcare circles because of the convenience they provide to patients and caregivers and assist in...     

Identification of a class of two CFOA-based sinusoidal RC oscillators

Using a unified representation for a class of the two current-feedback operational amplifier (CFOA) sinusoidal oscillators, new circuits of this type can be systematically discovered. A catalogue of two circuit structures, each structure realizing 18 oscillator circuits, is presented. Moreover, using the RC:CR transformation, additional 18 oscillator circuits can be obtained from each structure. A third structure realizing additional two oscillator circuits is also presented. Some of the circuits enjoy one or more of the following attractive features: use of grounded capacitors, feasibility of absorbing the parasitic components of the CFOAs, availability of a buffered output voltage and orthogonal tuning of the frequency and the startup condition of oscillation. Moreover, it is shown that the use of the Barkhausen criterion for the determination of the startup condition of oscillation and the frequency of oscillation yields inaccurate results with relatively large errors depending on the selected component values. Furthermore, it is shown that using the roots of the characteristic equation of a specific oscillator structure will result in a startup condition that cannot be adjusted without disturbing the frequency of oscillation.     

Industrial wireless sensor and actuator networks in industry 4.0: Exploring requirements,protocols, and challenges—A MAC survey

The vision to connect everyday physical objects to the Internet promises to create the Internet of Things (IoT), which is expected to integrate the diverse technologies such as sensors, actuators, radio frequency identification, communication technologies, and Internet protocols. Thus, IoT promises to transfer traditional industry to advance digital industry known as the Industry 4.0. At the core of the Industry 4.0 are the wireless sensor networks (WSNs) and wireless sensor and actuator networks (WSANs) that led to the development of industrial wireless sensor networks (IWSNs) and industrial wireless sensor and actuator networks (IWSANs). These networks play a central role of connecting machines, parts, products, and humans and create a diverse set of new applications to support intelligent and autonomous decision making. The IWSAN is a promising technology for numerous industrial applications because of their several potential benefits such as simple deployment, low cost, less complexity, and mobility support. However, despite such benefits, they impose several unique challenges at different layers of the protocol stack when deploying them for various monitoring and control applications in the Industry 4.0. In this article, we explore IWSAN, its applications, requirements, challenges, and solutions in the context of industrial control applications. Our main focus is on the medium access control (MAC) layer that can be exploited to satisfy such requirements. Our discussion presents extensive background study of the MAC schemes and it reviews the MAC protocols of the existing wireless standards and technologies. A number of application‐specific MAC protocols developed to support industrial applications, which are not part of these standards, are also elaborated. We rationalize to what extent the existing standards and protocols help in solving such requirements as laid down by the Industry 4.0. In the end, we emphasize on existing challenges and present important future directions.     

A 550-MSample/s 8-Tap FIR digital filter for magnetic recordingread channels

An area-efficient low-power and low-latency 550-MSample/s FIR filter for magnetic recording read channel applications is presented. A parallel direct type II architecture operates on real-time deinterleaved (even and odd) input data samples and employs a fast low-area multiplier based on selection of radix-8 premultiplied coefficients in conjunction with one-hot encoded bus leading to a very compact layout and reduced power dissipation. The chip has been fabricated using a 0.18-μm L-effective CMOS technology and is currently being used in commercial applications     

An extended access control model for permissioned blockchain frameworks

Wireless Networks - In distributed environment, a digital transaction or operation requires transparency and trust among multiple stakeholders. Several approches address such...