A provable and secure mobile user authentication scheme for mobile cloud computing services

The mobile cloud computing (MCC) has enriched the quality of services that the clients access from remote cloud‐based servers. The growth in the number of wireless users for MCC has further augmented the requirement for a robust and efficient authenticated key agreement mechanism. Formerly, the users would access cloud services from various cloud‐based service providers and authenticate one another only after communicating with the trusted third party (TTP). This requirement for the clients to access the TTP during each mutual authentication session, in earlier schemes, contributes to the redundant latency overheads for the protocol. Recently, Tsai et al have presented a bilinear pairing based multi‐server authentication (MSA) protocol, to bypass the TTP, at least during mutual authentication. The scheme construction works fine, as far as the elimination of TTP involvement for authentication has been concerned. However, Tsai et al scheme has been found vulnerable to server spoofing attack and desynchronization attack, and lacks smart card‐based user verification, which renders the protocol inapt for practical implementation in different access networks. Hence, we have proposed an improved model designed with bilinear pairing operations, countering the identified threats as posed to Tsai scheme. Additionally, the proposed scheme is backed up by performance evaluation and formal security analysis.     

Ground plane impact on quadrifilar helix antenna performance with respect to deployment heights

Quadrifilar helix antenna (QHA) has its applications in satellite communications. This paper presents the performance optimisation of input and radiation characteristics of QHA in the presence of infinite and finite metallic ground planes. For the infinite ground plane, it has been observed that input parameters such as impedance and voltage standing wave ratio (VSWR) are stable, and the antenna has broader half power beamwidth (HPBW). Smaller metallic platforms that act as finite ground planes produce better 3‐dB axial ratio beamwidth and boresight axial ratio. Deployment of QHA on smaller metallic platforms such as nanosatellites and CubeSats enhances the circularly polarised beamwidth of the antenna with improved boresight axial ratio. However, on large low earth orbit (LEO) satellites, stable input characteristics and broader HPBW have been achieved at the cost of narrow circularly polarised beamwidth and degraded boresight axial ratio.     

Coexistence of OFDM‐Based IMT‐Advanced and FM Broadcasting Systems

Coexistence analysis is extremely important in examining the possibility for spectrum sharing between orthogonal frequency‐division multiplexing (OFDM)‐based international mobile telecommunications (IMT)‐Advanced and other wireless services. In this letter, a new closed form method is derived based on power spectral density analysis in order to analyze the coexistence of OFDM‐based IMT‐Advanced systems and broadcasting frequency modulation (FM) systems. The proposed method evaluates more exact interference power of IMT‐Advanced systems in FM broadcasting systems than the advanced minimum coupling loss (A‐MCL) method. Numerical results show that the interference power is 1.3 dB and 3 dB less than that obtained using the A‐MCL method at cochannel and adjacent channel, respectively. This reduces the minimum separation distance between the two systems, which eventually saves spectrum resources.     

A Distributed Routing Method for Dynamic Multicasting

Single point, sender based control does not scale well for multicast delivery. For applications, such as group video or teleconferencing a low total cost multicast tree is required. In this article we present a destination driven algorithm to minimize the total tree cost of multicast tree in a dynamic situation for the whole session duration. In this heuristic approach we considered the staying duration of participants are available at the time of joining. The performance of our algorithm is analyzed through extensive simulation and evaluated against several other existing dynamic multicast routing and also against one well known near optimum heuristic algorithm used for solving Steiner tree problem. We have further tested our algorithm using erroneous information given by the joining participants. Simulation results show that its performance does not degrade that much even when the range of error is considerably high, which proves the robustness of our algorithm.     

The impact of metal-1 plasma processing-induced hot carrierinjection on the characteristics and reliability of n-MOSFETs

We report on plasma processing-induced damage to sub-half-micron n-MOSFETs that is invoked by potential differences between device terminals during metal-1 plasma processing. The damage mechanism is identified as hot carrier (HC) injection promoted by the layout of metal-1 interconnect. Using conventional and modified charge pumping techniques as well as transistor parameter measurements, we also investigate the impact of the damage on device reliability by applying Fowler-Nordheim (FN) and hot carrier stresses. The results show the severe impact of this damage on device reliability, which is attributed to trapping of positive charge at the drain edge that is enough to shorten the device channel     

A BIST-DFT technique for DC test of analog modules

Among test techniques for analog circuits, DC test is one of the simplest method for BIST application since easy to integrate test pattern generator and response analyzer are conceivable. Precisely, this paper presents such an investigation for a CMOS operational amplifier that is latter extended to active analog filters. Since the computation of fault coverage is still a controversy question for analog cells, we develop first an evaluation technique for optimizing the tolerance band of the measurements to test. Then, using some DFT solutions we derive single DC pattern and discuss the minimal number of points to test for the detection of defects. A response analyzer is integrated with a Built-in Voltage Sensor (BIVS) and provides directly a logic pass/fail test result. Finally, the extra circuitry introduced by this BIST technique for analog modules does not exceed 5% of the total silicon area of the circuit under test and detects most of the faults.     

Error rate for optimal follower tone-jamming

The performance of a countermeasure technique in the presence of the optimal follower multitone jammer is evaluated for frequency-hopped spread spectrum (FHSS) communications. It is shown that, with a certain probability, the optimal jammer will have dual tones in a frequency channel     

Capacity analysis of a TDMA-based slow-frequency-hopped cellularsystem

Time-division multiple access (TDMA)-based systems have been adopted as the first generation digital cellular standards in North America, Europe, and Japan. The increasing demand for capacity motivates the study of alternate systems and enhancements to the adopted TDMA standards. In particular, CDMA techniques using direct sequence and slow frequency hopping have been suggested. We analyze the capacity of a slow-frequency-hopped TDMA-based cellular system via calculation of the outage probability. Expressions for the outage probability as a function of voice activity, power control, and antenna diversity are provided for mobile-to-base transmission. These expressions are used to evaluate the system capacity (users/MHz/cell) based on simulating mobile locations within 37 hexagonal cells. The sensitivity to power control error, voice activity factor, and soft capacity of the system is investigated     

The exergy fields in transport processes: Their calculation and use

This paper is a brief review of the method for analyzing the space and time dependent exergy and irreversibility fields in processes. It presents the basic equations, the method for their use, major literature sources, and three examples from the authors' work: flow desiccation, combustion of oil droplets, and combustion of pulverized coal. Conclusions from this Second Law analysis are used to attempt process improvement suggestions.     

Free convection performance of circular cavities having two active curved vertical sides and two inactive curved horizontal sides

A detailed review of the archival reveals that the heat transfer and fluid flow characteristics of circular cavities have not been investigated so far and of course their physical features are not understood. A prominent application of these cavities arises in the miniaturized packaging of electronic components that are subject to strict constraints. This paper addresses primarily steady-state laminar natural convection of air in a circular cavity of diameter H inscribed in a square cavity of side H where the corresponding sides are in contact at four points. A third cavity, an arc–square cavity whose shape lies between the square and circular cavity shapes is included in the analysis. The finite volume method is used to perform the numerical simulations. The methodology takes into account the second-order-accurate QUICK scheme for the discretization of the convective term, whereas the pressure–velocity coupling is handled with the SIMPLE scheme. Since the air is not assumed a Boussinesq gas, it was decided to take all thermophysical properties as temperature-dependent. In the end, it has been demonstrated that the circular cavity possesses a superior balance between heat transfer enhancement and size in cross-section area in comparison with the standard square cavity. The side of the square cavity is similar to the diameter of the circular cavity.