Synthesis of hexagonal graphene on polycrystalline Cu foil from solid camphor by atmospheric pressure chemical vapor deposition

Understanding of graphene nucleation and growth on a metal substrate in chemical vapor deposition (CVD) process is critical to obtain high-quality single crystal graphene. Here, we report synthesis of individual hexagonal graphene and their large cluster on Cu foil using solid camphor as a carbon precursor in the atmospheric pressure CVD (AP-CVD) process. Optical and scanning electron microscopy studies show formation of hexagonal graphene crystals across the grain, grain boundaries and twin boundaries of polycrystalline Cu foil. Electron backscattered diffraction analysis is carried out before and after the growth to identify Cu grain orientation correlating with the graphene formation. The influence of growth conditions and Cu grain structure is explored on individual hexagonal graphene formation in the camphor-based AP-CVD process.     

Spark plasma sintering and thermoelectric evaluation of nanocrystalline magnesium silicide (Mg2Si)

Recently magnesium silicide (Mg₂Si) has received great interest from thermoelectric (TE) society because of its non-toxicity, environmental friendliness, comparatively high abundance, and low production material cost as compared to other TE systems. It also exhibited promising transport properties, including high electrical conductivity and low thermal conductivity, which improved the overall TE performance (ZT). In this work, Mg₂Si powder was obtained through high energy ball milling under inert atmosphere, starting from commercial magnesium silicide pieces (99.99 %, Alfa Aesar). To maintain fine microstructure of the powder, spark plasma sintering (SPS) process has been used for consolidation. The Mg₂Si powder was filled in a graphite die to perform SPS and the influence of process parameters as temperature, heating rate, holding time and applied pressure on the microstructure, and densification of compacts were studied in detail. The aim of this study is to optimize SPS consolidation parameters for Mg₂Si powder to achieve high density of compacts while maintaining the nanostructure. X-Ray diffraction (XRD) was utilized to investigate the crystalline phase of compacted samples and scanning and transmission electron microscopy (SEM & TEM) coupled with Energy-Dispersive X-ray Analysis (EDX) was used to evaluate the detailed microstructural and chemical composition, respectively. All sintered samples showed compaction density up to 98 %. Temperature dependent TE characteristics of SPS compacted Mg₂Si as thermal conductivity, electrical resistivity, and Seebeck coefficient were measured over the temperature range of RT 600 °C for samples processed at 750 °C, reaching a final ZT of 0.14 at 600 °C.     

THE EFFECT OF METALLOPORPHYRINS ON ASPHALT OXIDATION. I. EFFECT OF SYNTHETIC METAL CHELATES

ABSTRACT

Two different asphalts were coated on a Fluoropak support and were oxidized at 130 ± 2^°C for 24 hours using a number of metal chelales as additives. After oxidation the recovered asphalts were analyzed by infrared spectrometry to determine enhancements of keto, acid, and anhydride functions. Vanadyl etioporphyrin I was found to be an effective promoter in the oxidation of both asphalts. Vanadyl porphyrins having bulky ring substituents are not as effective as vanadyl etioporphyrin I in promoting asphalt oxidations.     

Lipid-modifying activity of curcuminoids: A systematic review and meta-analysis of randomized controlled trials

Objective: The aim of this systematic review and meta-analysis was to determine and clarify the impact of curcuminoids on serum lipid levels. Methods: Randomized controlled trials (RCTs) investigating the effects of curcuminoids on plasma lipids were searched in PubMed-Medline, Scopus, Web of Science databases (from inception to April 3^rd, 2017). A random-effects model and generic inverse variance method were used for quantitative data synthesis. Sensitivity analysis was conducted using the leave-one-out method. A weighted random-effects meta-regression was performed to evaluate the impact of potential confounders on lipid concentrations. Results: A meta-analysis of 20 RCTs with 1427 participants suggested a significant decrease in plasma concentrations of triglycerides (WMD: ?21.36 mg/dL, 95% CI: ?32.18, ?10.53, p < 0.001), and an elevation in plasma HDL-C levels (WMD: 1.42 mg/dL, 95% CI: 0.03, 2.81, p = 0.046), while plasma levels of LDL-C (WMD: ?5.82 mg/dL, 95% CI: ?15.80, 4.16, p = 0.253) and total cholesterol (WMD: ?9.57 mg/dL, 95% CI: ?20.89, 1.75, p = 0.098) were not altered. The effects of curcuminoids on lipids were not found to be dependent on the duration of supplementation. Conclusion: This meta-analysis has shown that curcuminoid therapy significantly reduces plasma triglycerides and increases HDL-C levels.     

基于高光谱成像技术的药用胶囊铬含量快速检测方法研究

研究了基于高光谱成像技术快速检测药用胶囊铬含量的方法。首先应用传统的原子吸收分光法对药用明胶空心硬胶囊分析结果作为对照组,再对1048个胶囊（含正常和含有重金属铬）样本的高光谱数据进行降维和定性分析,最后选择偏最小二乘判别分析方法对光谱数据进行处理。当用4个偏最小二乘算子（LV）作为偏最小二乘法模型中的输入特征,分类准确率可达100%,2种样本的交叉验证和样本预测相关系数分别为0.923和0.972;敏感度与特异度均为100%。     

Development of a Non-collinear Nonlinear Ultrasonic-Based Technique for the Assessment of Crack Tip Deformation

Non-collinear nonlinear ultrasonic (NCNLU) wave mixing technique has been established to study the localized plastic deformation at the crack tip during fatigue. A pair of ultrasonic shear wave was mixed non-collinearly to obtain a longitudinal wave of frequency equal to the sum of the two shear wave frequencies under a resonant condition. Experiments were carried out on notched 9Cr-1Mo 3-point bend specimen during high-cycle fatigue. The variation of the NCNLU parameter with the stress accumulation at the crack tip during the fatigue crack initiation and propagation and mapping of the deformation zone around the crack tip are described in this paper.     

Fluorescent superlattices of gold nanoparticles: A new class of functional materials

Fluorescent three-dimensional (3-D) superlattices of dansyl glutathione protected gold nanoparticles, with potential applications in molecular detection, have been synthesized at an air/water interface by controlling the pH of the nanoparticle suspension. The number of fluorophores per nanoparticle was calculated to be ∼127. Morphologies of the superlattice crystals were examined using scanning electron microscopy (SEM). Most of the crystals observed were triangular in shape. High-resolution transmission electron microscopy (HRTEM) and small angle X-ray scattering (SAXS) were used to study the packing of nanoparticles in these crystals. Both these studies showed that the nanoparticles were arranged in a face-centered cubic (fcc) pattern with a particle-particle distance (center-center) of ∼10.5 nm. Evolution of the crystal morphologies with time was also examined. The fluorescence properties of these triangles were studied using confocal fluorescence imaging and confocal Raman mapping, which were in good agreement with the morphologies observed by SEM. The superlattice exhibits near-infrared (NIR) absorption in the range 1100–2500 nm. Easy synthesis of such functional nanoparticle-based solids makes it possible to use them in novel applications. We utilized the fluorescence of dansyl glutathione gold superlattice crystals for the selective detection of bovine serum albumin (BSA), the major protein constituent of blood plasma, based on the selective binding of the naphthalene ring of the dansyl moiety with site I of BSA. Electronic Supplementary Material  Supplementary material is available for this article at and is accessible for authorized users. This article is published with open access at Springerlink.com     

Determination of Optimum Velocity for Various Nanofluids Flowing in a Double-Pipe Heat Exchanger

Piping is one of the most important issues in the cost of process factories. It is known that 80% of bought equipment cost or 20% of overhead capital can belong to piping cost in a fluid-process factory. Pipe diameter and therefore flow velocity strongly affect the existing value of the factory regarding the consumed electric energy and fitting cost of pipes, pumps, and valves. We give a detailed cost analysis model for the pure fluids of water, motor oil, glycerin, ammonia, methanol, ethanol, ethylene glycol, and propane and their nanofluid mixtures with Ti and TiO₂ particles in liquid phase flowing in the tube side of a double-pipe heat exchanger. Pressure drop and pumping power values increase with flow velocity but total cost values show an arc with it. The clear outcome is that there is a minimum cost value as a result of the analyses for each investigated fluids. Moreover, validation of the model is performed by plotting the calculated items in figures such as total heat transfer coefficient versus Reynolds number, pressure drop versus Reynolds number, and friction factor versus mass flow rate. Characteristics of the trend lines in these figures are seen as they should be.     

A Superior Method for Constructing Electrical Percolation Network of Nanocomposite Fibers: In Situ Thermally Reduced Silver Nanoparticles

Nanocomposite fibers, composed of conductive nanoparticles and polymer matrix, are crucial for wearable electronics. However, the nanoparticle mixing approach results in aggregation and dispersion problems. A revolutionary synthesis method by premixing silver precursor ions (silver ammonium acetate) with polyvinyl alcohol is reported here. The solvation of ions‐prevented aggregation, and uniformly distributed silver nanoparticles (in situ AgNPs, 77 nm) are formed after thermal reduction (155 °C) without using additional reducing or dispersion agents. The conductive fiber is synthesized by the wet spinning technology. After careful optimization, flower‐shaped silver nanoparticles (AgNFs, 350–450 nm) are also employed as cofillers. The addition of in situ AgNPs (9.5 vol%) to AgNFs (30 vol%) increases electrical conductivity by 1434% (2090 to 32 064 S cm^?1) through the efficient construction of percolation networks. The in situ AgNPs provide significantly higher conductivity compared with other secondary nanoparticle fillers. The gaseous byproducts dramatically increase flexibility with a moderate compromise in tensile strength (55 MPa). The particle‐free ion‐level uniform mixing of silver precursors, followed by in situ reduction, would be a fundamental paradigm shift in nanocomposite synthesis.