Route optimization in mobile ATM networks

This paper presents an algorithm for optimizing the route of a connection that becomes suboptimal due to operations such as handoffs and location-based reroutes, and applies this algorithm to the handoff management problem in mobile ATM (Asynchronous Transfer Mode) networks based on the PNNI (Private Network-to-Network Interface) standard. The route optimization algorithm uses hierarchical route information of the connection and summarized topology and loading information of the network to determine a “crossover node” such that adjusting the connection from that crossover node results in an optimally routed connection. Handoff management schemes that perform local rerouting of connections have been proposed in order to support fast handoffs. These methods result in suboptimally routed connections. In this paper, we demonstrate how this route optimization algorithm can be used to optimize the route of a connection after such a handoff is executed, as the second phase of a two-phase handoff scheme. This route optimization procedure can also be executed as part of the handoff procedure resulting in a one-phase handoff scheme. Applying this route optimization algorithm, we propose two one-phase schemes, the one-phase optimal scheme and the one-phase minimal scheme. A comparative performance analysis of one- and two-phase handoff schemes is presented. Measures of comparison are handoff latency and the amount of network resources used by a connection. Handoff latency in the one-phase optimal scheme is greater than that in the two-phase schemes, and handoff latency in the one-phase minimal scheme is smaller than that in the two-phase schemes. The one-phase methods show a significant increase in efficiency of the connection compared to the two-phase methods. This revised version was published online in June 2006 with corrections to the Cover Date.     

Secure routing in mobile wireless ad hoc networks

We discuss several well known contemporary protocols aimed at securing routing in mobile wireless ad hoc networks. We analyze each of these protocols against requirements of ad hoc routing and in some cases identify fallibilities and make recommendations to overcome these problems so as to improve the overall efficacy of these protocols in securing ad hoc routing, without adding any significant computational or communication overhead.     

Carbon Nanotube Growth on Calcium Carbonate Supported Molybdenum-Transition Bimetal Catalysts

A comparison of different catalyst systems (Fe–Mo, Co–Mo or Ni–Mo nanoparticles supported on calcium carbonate) has been performed in order to optimize the carbon nanotube (CNT) growth. The influences of the reaction temperature, metal loading and carbon source on the synthesis of CNTs were investigated. Dense CNT networks have been synthesized by thermal chemical vapor deposition (CVD) of acetylene at 720 °C using the Co–Mo/CaCO₃ catalyst. The dependence of the CNT growth on the most important parameters was discussed exemplarily on the Co catalyst system. Based on the experimental observations, a phenomenological growth model for CVD synthesis of CNTs was proposed. The synergy effect of Mo and active metals was also discussed.     

Thyroid hormones in diabetic ketoacidosis before and after therapy

Fifteen IDDM patients were evaluated for thyroid hormone abnormalities before and after control of diabetes mellitus/ketoacidosis. Blood sugar mean +/- SEM mg/dl on admission was 430 +/- 20.3 and after therapy fasting and post prandial blood sugar values were 120 +/- 14.5 and 150 +/- 20.2 respectively. GHb mean +/- SEM % on admission was 15.2 +/- 0.36. Serum T3 mean +/- SEM ng/dl of 0.36 +/- 0.04 was in hypothyroid range and rT3 mean +/- SEM ng/ml 0.40 +/- 0.6 was significantly raised (P < 0.001) before therapy. After metabolic control both T3 and rT3 became normal. T4 concentration mean +/- SEM meg/dl of 5.5 +/- 0.7 was well within normal range before therapy and rose to mean +/- SEM mcg/dl 8.8 +/- 0.5 after therapy (P < 0.01). TSH response to TRH was blunted in uncontrolled state. It is concluded that peripheral changes in T3, T4 and rT3 (low T3, high rT3 and low or normal T4) occurred in uncontrolled diabetic state during ketoacidosis. TSH response to TRH was blunted due to suppression of hypothalamic pituitary thyroid axis which takes more than a week for complete recovery.     

Cost analysis of a two-unit standby system under the influence of earthquakes

This paper deals with two models. In model 1, which is cold standby, when an earthquake comes the operation of the unit is stopped. In model 2, which is warm standby, a medium intensity earthquake will cause a short circuit failure mode. The repair is available immediately upon calling. In model 1, the failure rate is taken to be constant whereas the repair time distribution is arbitrary. In model 2, the failure and repair time distributions are considered to be arbitrarily distributed. Applying the regenerative theory in Markov renewal processes, various reliability characteristics of interest have been explicitly obtained.     

Solar energy conversion through phase transformations

Sodium thiosulphate pentahydrate and sodium sulphate decahydrate show appreciable potential differences and currents when the solid phase is in contact with its molten phase. the studies offer a new method for converting solar energy into electrical power.     

Activation status and function of the VLA-4 (alpha4beta1) integrin expressed on human melanoma cell lines

A highly sensitive microspectrophotometer was developed to measure spectral changes of oxyhemoglobin (oxy Hb) in single red blood cells (RBC) incubated with stimulated macrophages as a model of nitric oxide (NO) dependent cytotoxicity. Our microspectrophotometer, using a modified acousto-optic tunable filter (AOTF) and a 2-dimensional CCD array, allows fast spectrophotometric data acquisition. Human RBC treated with various concentrations of NO showed spectral changes due to the conversion of oxy Hb to methemoglobin (met Hb), in which the change in absorption differences at alpha (557 590 nm) and beta (542-525 nm) bands showed a linear relationship with the concentration of NO up to 100 microM. In contrast to highly diffusible NO, nitrite ions (NO2-) seem to enter RBC very slowly, resulting in negligible formation of met Hb in the presence of 5 mM glucose even during a prolonged incubation period. RBC were incubated with murine macrophages with and without lipopolysaccharide (LPS) in the presence of glucose for 24 and 40 h and subjected to the microspectrophotometric assay. The RBC incubated with LPS-stimulated macrophages showed significant changes in the spectrum due to NO-dependent conversion of oxy Hb to met Hb, which corresponded to the spectral changes of RBC treated with a several times higher concentration of NO than that in the culture medium. The trapping efficiency was calculated from the amounts of the NO released from macrophages and of the met Hb formed in the RBC, which gave a high efficiency (43%). The results suggest that RBC trap NO directly by cell cell interaction with macrophages. This spectrophotometric system is available for use with just a few drops of samples to study NO-specific cytotoxicity as a model of RBC without the use of any chemical reagent, in parallel with microscopic observations on changes of the cellular morphology under physiological conditions, such as membrane damage leading to hemolysis, adherence, and phagocytosis.     

Concentration oscillations of carbon monoxide,oxygen and 1-butene over a platinum supported catalyst

The effect of a wide range of experimental parameters on the sinusoidal and multiple spike oscillations observed during the oxidation of mixture of carbon monoxide and 1-butene over platinum supported on γ-alumina has been investigated in a CSTR. An elementary step model, where the rate constants are assumed independent of surface coverages, is found to be able to account largely for the observed oscillatory phenomena. The carbon monoxide and oxygen adsorption and desorption rate constant values in the model have been evaluated by fitting experimental transients, while 1-butene parameter values were obtained from stability conditions. Rate constant values and operating conditions have a profound effect on the observed and predicted oscillations. A parameter of great importance is the ratio of the number of adsorption sites to reactor volume.