Inhibitory properties of camel whey protein hydrolysates toward liver cancer cells,dipeptidyl peptidase-IV,and inflammation

This report describes an investigation of camel whey protein hydrolysates (CWPH) produced by gastric and pancreatic enzymes for their in vitro antidiabetic, anticancer, and anti-inflammatory properties. Degree of hydrolysis (DH) ranged from 8.54 to 47.53%, with hydrolysates generated using chymotrypsin for 6 h displaying the highest DH. Reverse phase-HPLC analysis showed that α-lactalbumin underwent complete degradation, with no intact α-lactalbumin detected in CWPH. The CWPH displayed enhanced antidiabetic activity compared with intact whey proteins; with pepsin- and chymotrypsin-generated CWPH displaying greater inhibition of dipeptidyl peptidase IV (DPP-IV), α-glucosidase, and α-amylase compared with trypsin-generated CWPH. The highest antiproliferative effect was observed for CWPH generated by chymotrypsin for 3 h, with only 4.5 to 6.5% viable liver cancer cells (HepG2) remaining when tested at concentrations from 400 to 1,000 µg/mL. The highest anti-inflammatory activity was manifested by CWPH generated by pepsin at 6-h hydrolysis. We report enhanced antiproliferative, antidiabetic, and anti-inflammatory activities upon hydrolysis of camel whey proteins, indicating their potential utilization as bioactive and functional ingredients.     

Processing and characterisation of nano crystalline AlCoCrCuFeTix high-entropy alloy

In this work multi-component equiatomic and non-equiatomic AlCoCrCuFeTi_x hexanary high-entropy alloys (HEA) was synthesised through mechanical alloying. The prepared powder was sintered via spark plasma sintering. Influence of alloying element variation in the multi-component system was studied in terms of phase formation and crystal structure by using Thermo-Calc and X-ray diffraction characterization technique (XRD). Particle morphology and chemical analysis studies were carried out through scanning electron microscopy along with Electron Dispersive X-ray Spectroscopy. The crystal structure and nano crystallinity of the hexanary system were recognised using transmission electron microscope (TEM and Selected Area Electron Diffraction [SAED]) while the formation of a solid solution was also studied and discussed. From the XRD and TEM characterisation of 20?h in, milled powders and sintered samples, it was confirmed that the developed HEA system forms a single solid solution BCC phase. The sintered alloy exhibits 97% relative density and an average hardness of 590?VHN.

Special theme block on high entropy alloys, guest edited by Paula Alvaredo Olmos, Universidad Carlos III de Madrid, Spain, and Sheng Guo, Chalmers University, Gothenburg, Sweden.     

VizCluster and its Application on Classifying Gene Expression Data

Visualization enables us to find structures, features, patterns, and relationships in a dataset by presenting the data in various graphical forms with possible interactions. A visualization can provide a qualitative overview of large and complex datasets, can summarize data, and can assist in identifying regions of interest and appropriate parameters focused on quantitative analysis. Recently, DNA microarray technology provides a broad snapshot of the state of the cell, by measuring the expression levels of thousands of genes simultaneously. Such information can thus be used to analyze different samples by gene expression profiles. It has already had a significant impact on the field of bioinformatics, requiring innovative techniques to efficiently and effectively extract, analyze, and visualize these fast growing data.In this paper, we present a dynamic interactive visualization environment, VizCluster, and its application on classifyinggene expression data. VizCluster takes advantage of graphical visualization methods to reveal underlining data patterns. It combines the merits of both high dimensional projection scatter-plot and parallel coordinate plot. In its core lies a nonlinear projection which maps the n-dimensional vectors onto two-dimensional points. To preserve the information at different scales and yet reduce the typical problem of parallel coordinate plots being messy caused by overlapping lines, a zip zooming viewing method is proposed. Integrated with other features, VizCluster is developed to give a simple, fast, intuitive, and yet powerful view of the data set. Its primary applications are on the classification of samples and evaluation of gene clusters for microarray datasets. Three gene expression datasets are used to illustrate the approach. We demonstrate that VizCluster approach is promising to be used for analyzing and visualizing microarray data sets and further development is worthwhile.     

Collision detection between the wrists of two robot arms in a common workspace

Detecting collisions for planning collision-free motion of the wrists of two robot arms in a common workspace is discussed in this paper. A collision-free motion can be obtained by detecting collisions along the preplanned trajectories using a sphere model for the wrist of each robot and then modifying the paths and/or trajectories of one or both robots to avoid the collision. In this paper, a collision detection algorithm is described and its role in collision avoidance is discussed. Collision detection is based on the premise that (1) the wrists of robots move monotonically on their preplanned straight line trajectories and (2) collisions never occur between the two wrists at the beginning points or end points.Research supported by the NASA-Langley Research Center under Grants #NAG-1-632 and #NAG-1-772 and the AT&T Foundation.     

Efficient distributed simulation through dynamic load balancing

With recent advances in parallel computation, distributed simulation has become a viable way of dealing with time-consuming simulations. For distributed simulations to run efficiently, care must be taken in assigning the tasks (work) in the simulated system to the available physical processors in the computer system. An inefficient assignment can result in excessive communication times between processors and unfavorable load conditions. This leads to long run times, possibly giving performance worse than that with a uniprocessor sequential event-list implementation. This paper establishes the feasibility, and in some cases the necessity, of using dynamic task allocation (rather than a-priori static allocation) in distributed simulation. A dynamic reallocation strategy is developed, and experiments on an iPSC/2 Hypercube indicate that significant improvements in run time can be achieved at low cost.     

Properties of pulse electrodeposited copper indium selenide films

Copper Indium Selenide films were deposited by the pulse plating technique at different bath temperatures in the range of 30–80 °C and at 50 % duty cycle (15 s ON and 15 s OFF). X-ray diffraction studies indicated the formation of single phase chalcopyrite copper indium selenide films. The band gap of the films decreased from 1.17 to 1.05 eV with decrease of duty cycle. Atomic force microscope studies indicated that the surface roughness and grain size increased with duty cycle. Room temperature resistivity of the films is in the range of 0.01–2.0 ohm cm. Films deposited at 50 % duty cycle have exhibited a V_oc of 0.59 V, J_sc of 15 mA cm^?2, FF of 0.75 and efficiency of 6.64 %.     

Precision Nanocluster-Based Toroidal and Supertoroidal Frameworks Using Photocycloaddition-Assisted Dynamic Covalent Chemistry

Atomically precise nanoclusters (NCs) have recently emerged as ideal building blocks for constructing self-assembled multifunctional superstructures. The existing structures are based on various non-covalent interactions of the ligands on the NC surface, resulting in inter-NC interactions. Despite recent demonstrations on light-induced reversible self-assembly, long-range reversible self-assembly based on dynamic covalent chemistry on the NC surface has yet to be investigated. Here, it is shown that Au₂₅ NCs containing thiolated umbelliferone (7-hydroxycoumarin) ligands allow [2+2] photocycloaddition reaction-induced self-assembly into colloidal-level toroids. The toroids upon further irradiation undergo inter-toroidal reaction resulting in macroscopic supertoroidal honey-comb frameworks. Systematic investigation using electron microscopy, atomic force microscopy (AFM), and electron tomography (ET) suggest that the NCs initially form spherical aggregates. The spherical structures further undergo fusion resulting in toroid formation. Finally, the toroids fuse into macroscopic honeycomb frameworks. As a proof-of-concept, a cross-photocycloaddition reaction between coumarin-tethered NCs and an anticancer drug (5-fluorouracil) is demonstrated as a model photo-controlled drug release system. The model system allows systematic loading and unloading of the drug during the assembly and disassembly under two different wavelengths. The results suggest that the dynamic covalent chemistry on the NC surface offers a facile route for hierarchical multifunctional frameworks and photocontrolled drug release.     

Dynamics of Brownian motion and flux conditions on naturally unsteady thermophoretic flow with variable fluid properties

This work examines the boundary flow difficulties of the past and the heat transfer properties of Blasius and Sakiadis flows under prescribed concentration flux and prescribed heat flux. The nanofluid is also taken into account in this model, along with impacts from Brownian motion and thermophoresis. The modified system governing partial differential equations is numerically solved by using the R-K method along with the shooting technique. Various values of physical quantities like thermophoresis parameter, Brownian motion parameter, Eckert number, thermal radiation parameter, heat source parameter, and magnetic field parameter along with the $C_f,N{u}_x,\text{and}S{h}_x$ were calculated using the temperature, concentration, and velocity profiles. Finally, we demonstrated how the Brownian motion, radiation, and thermophoresis parameters can significantly increase the temperature distributions. The concentration distributions were decelerated with an increase in Brownian motion parameters for both Blasius and Sakiadis cases.     

Photopatternable High-k Polysilsesquioxane Dielectrics for Organic Integrated Devices: Effects of UV Curing on Chemical and Electrical Properties

Polysilsesquioxanes (PSQs) have generated great interest as solution-processable inorganic polymers for obtaining high-dielectric-constant (k) dielectrics. Engineering the side chains in PSQs can enhance the polarization characteristics and provide different functionalities, such as photopatternability and ferroelectric performance. In this study, two types of UV curable high-k PSQs are prepared by introducing epoxy-containing side chains to the PSQs: 1) glycidyl epoxy-containing linear groups and 2) bulky cycloaliphatic epoxy-containing groups. The physical, chemical, and electrical properties of these two materials after UV curing are investigated. Both PSQ films show high dielectric strength and are successfully patterned after exposure to UV light. The structure of the side chains influences the UV curing behavior and capacitance characteristics of the PSQ dielectrics. These differences determine the driving behavior of the fabricated organic thin-film transistors, which exhibits either stable or ferroelectric operation. Finally, logic gates and memory cells exhibiting low-voltage and non-destructive operations are successfully integrated using UV cured PSQs. This approach for engineering PSQs with the purpose of achieving desirable photopatternability and high dielectric or ferroelectric performance can be used to realize simple and inexpensive solution-processing techniques for next generation integrated electronics.