Effects and modelling of ultrasonic waste‐activated sludge disintegration

Sonication is a well‐known sludge pretreatment technique with the advantages of simple operation and high efficiency. However, it is an energy‐intensive process. Hence, it is very important to predetermine its sludge disintegration efficiency at varying pretreatment conditions in order to minimize the ultrasonic energy consumption. In this study, it was found that the ultrasonic sludge disintegration occurred in two stages: rapid and subsequent slow disintegration stages. For this reason, it was aimed to develop a simple and accurate mathematical model to describe the two‐stage sludge disintegration as a function of pretreatment conditions. Sludge concentration and ultrasonic density along with sonication period were involved in this model as independent variables. It was determined that the mathematical model can predict accurately the degree of sludge disintegration. Thus, the proposed model was seen to be very useful for evaluating the disintegration efficiency and/or for process design using the operating parameters under different conditions.     

Revised stratigraphy of the Tertiary deposits of Istanbul and their engineering properties

For over 50 years, the Upper Oligocene–Upper Miocene sedimentary sequence in Istanbul has been considered to be formed of two distinct sequences separated by an unconformity. However, recent field observations and an analysis of numerous borehole data indicate the Gürp?nar, Çukurçe?me and Güngören Formations are in fact a single sequence of alternating clay–sand/sandstone beds/lenses, here named the Avc?lar Formation. The Bak?rköy Formation, which is typically composed of carbonate rocks, conformably overlies the Avc?lar Formation. The paper provides the geotechnical parameters of the units within the Avc?lar Formation which it is hoped will facilitate selecting suitable geotechnical and engineering geological parameters to represent the deposits and minimize errors in the interpretation/evaluation of in-situ conditions.     

Long-term microleakage trends in access cavities conditioned with phosphoric acid and deproteinizing agent for root-canal-treated teeth: an investigation of fluid filtration and microscopy analysis

This study evaluated the long-term microleakage of access cavities conditioned with phosphoric acid and deproteinizing agents for root-canal-treated teeth using fluid filtration and microscopical analysis. Occlusal surfaces of extracted human mandibular premolars (N = 90) were removed leaving a 4 mm coronal length from the cemento-enamel junction. After root canal treatment, the specimens were randomly divided into four experimental groups (n = 21) and the remaining teeth were used for positive control group (n = 6): SB: 35% H₃PO₄ + Adper Single Bond 2; SSB: 35% H₃PO₄ + 5.25% NaOCl + 10% Sodium ascorbate (C₆H₇NaO₆) + Adper Single Bond 2; XP: 35% H₃PO₄₊XP Bond; SXP: 35% H₃PO₄₊5.25% NaOCl + 10% Sodium ascorbate + XP Bond. All cavities were restored with a resin composite (Filtek Z250). After removing the root filling from the apical side, teeth were subjected to fluid filtration test for 1 week, 6 and 12 months followed by ×2500 thermocycling after 1st week and 6th months each. Data were analyzed using one-way ANOVA and Dunnet T3 tests (α = 0.05). SEM analyses were carried out after each microleakage evaluation in two random teeth from all groups. Microleakage values in groups SB and XP presented no significant difference in any of the evaluated period (p > 0.05). Microleakage results of SXP (0.01665) group showed significant difference compared to XP (0.03377) and SB (0.03049) groups after 12 months. SSB group (0.00901) showed significantly less microleakage among all other groups (0.01665–0.03377) (p < 0.05). Prior to endodontic treatment, in access cavities, acid etching with 35% H₃PO₄ followed by the application of NaOCl and sodium ascorbate completely destroyed the collagen layer, reducing the microleakage and resin–dentin interface degradation up to 12 months.     

Capacitor Applications of Nanocomposite Films for Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Multi-Walled Carbon Nanotubes and Poly(3,4-ethylenedioxythiophene-co-pyrrole)/Copper Oxide

Polypyrrole/multi-walled carbon nanotube, poly(3,4-ethylenedioxythiophene)/multi-walled carbon nanotube and their nanocomposites P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/copper (II) oxide, (CuO) in the initial feed ratio of [EDOT]₀/[Py]₀ = 1/5 were electrosynthesized on glassy carbon electrode by cyclic voltammetric method. Their characterizations were performed by cyclic voltammetric, Fourier transform infrared-attenuated total reflectance, scanning electron microscopy, energy dispersion X-ray analysis, and electrochemical impedance spectroscopy. To the best of authors’ knowledge, the first report on polypyrrole/multi-walled carbon nanotube, PEDOT/multi-walled carbon nanotube, P(EDOT-co-Py)/multi-walled carbon nanotube and P(EDOT-co-Py)/CuO nanocomposite films were comparatively examined in 0.1 M NaClO₄/CH₃CN and in 0.1 M sodium dodecyl sulfate solutions. The highest specific capacitance for PEDOT/multi-walled carbon nanotube and polypyrrole/multi-walled carbon nanotube composite films were obtained as C_sp = 306 mF × cm^?2 for 3% multi-walled carbon nanotube and C_sp = 804 mF × cm^?2 for 1% multi-walled carbon nanotube, respectively. The highest specific capacitances were obtained as C_sp = 27.40 mF × cm^?2 and C_sp = 26.90 mF × cm^?2 for P(EDOT-co-Py)/multi-walled carbon nanotube includes the wt percent of 1% multi-walled carbon nanotube and P(EDOT-co-Py)/CuO includes the wt percent of 3% CuO, respectively. The C_sp of P(EDOT-co-Py)/CNT composite films were calculated as 9.43 and 11.49 mF × cm^?2 for 3 and 5% multi-walled carbon nanotube, respectively. In addition, The EIS results were simulated with the equivalent circuit model of R_s(C_dl1(R₁(QR₂)))(C_dl2R₃).     

Synthesis,characterization and,swelling behavior of semi‐IPN nanocomposite hydrogels of alginate with poly(N‐isopropylacrylamide) crosslinked by nanoclay

pH and temperature responsive nanocomposite hydrogels were synthesized with sodium alginate (NaAlg), N‐isopropylacrylamide (NIPA), and nanoclay. The structure, morphology, thermal behavior, and swelling and deswelling behaviors of the hydrogels were studied. The NaAlgm/PNIPA/Clayn hydrogels revealed a highly porous structure in which the pore sizes decreased and the amount of pores increased with increasing the nanoclay content in the hydrogels. PNIPA retained its own characteristics regardless of the amount of NaAlg and nanoclay. The effect of pH and nanoclay content on the swelling and effect of temperature on the deswelling behavior were investigated. The equilibrium swelling ratios of the nanocomposite hydrogels increased with increasing the pH from 2 to 6. The maximum swelling was attained at pH 6. Deswelling increased with increasing the nanoclay content in the hydrogels. The hydrogels were found to be pH and temperature responsive. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 43222.     

Novel colloidal nanofiber electrolytes from PVA‐organoclay/poly(MA‐alt‐MVE), and their NaOH and Ag‐carrying polymer complexes

Novel multifunctional polymer nanofiber electrolytes with covalence crosslinked structures from various solution blends of reactive intercalated poly(vinyl alcohol)/octadecylamine montmorillonite (as a matrix polymer), poly(maleic anhydride‐alt‐methyl vinyl ether) (as a partner polymer) and their NaOH‐absorbing and Ag‐carrying polymer complexes were fabricated via electrospinning. Chemical, physical, morphological, and electrical properties of nanofiber structures were investigated by FTIR, XRD, SEM, and electrical analysis methods. Ag precursors in fiber composites significantly improved phase separation processing, fiber morphologies, diameter distributions, and electrical properties of the fibers. In situ generation of Ag nanoparticles and their distribution on nanofiber surfaces during fiber formation occurred via complex formation between silver cations and electronegative functional groups from both matrix and partner polymers as stabilizing/reducing agents. Electrical resistance and conductivity strongly depended on matrix/partner polymer ratios and absorption time of NaOH solution on nanofibers. Addition of NaOH changed the electrical properties of fiber structures from almost dielectric state to excellent conductivity form. The fabricated unique nanofiber electrolytes are promising candidates for applications in power and fuel cell nanotechnology, electrochemical, and bioengineering processes as reactive semiconductive platforms. POLYM. ENG. SCI., 56:204–213, 2016. © 2015 Society of Plastics Engineers     

Stabilized electrospinning of heat stimuli/in situ crosslinkable nanofibers and their self‐same nanocomposites

We present a strategy for stabilizing the morphological integrity of electrospun polymeric nanofibers by heat stimuli in situ crosslinking. Amorphous polymer nanofibers, such as polystyrene (PS) and its co‐polymers tend to lose their fiber morphology during processing at temperatures above their glass transition temperature (T_g) typically bound to happen in nanocomposite/structural composite applications. As an answer to this problem, incorporation of the crosslinking agents, phthalic anhydride (PA) and tributylamine (TBA), into the electrospinning polymer solution functionalized by glycidylmethacrylate (GMA) copolymerization, namely P(St‐co‐GMA), is demonstrated. Despite the presence of the crosslinker molecules, the electrospinning polymer solution is stable and its viscosity remains unaffected below 60 °C. Crosslinking reaction stands‐by and can be thermally stimulated during post‐processing of the electrospun P(St‐co‐GMA)/PA‐TBA fiber mat at intermediate temperatures (below the T_g). This strategy enables the preservation of the nanofiber morphology during subsequent high temperature processing. The crosslinking event leads to an increase in T_g of the base polymer by 30 °C depending on degree of crosslinking. Crosslinked nanofibers are able to maintain their nanofibrous morphology above the T_g and upon exposure to organic solvents. In situ crosslinking in epoxy matrix is also reported as an example of high temperature demanding application/processing. Finally, a self‐same fibrous nanocomposite is demonstrated by dual electrospinning of P(St‐co‐GMA) and stabilized P(St‐co‐GMA)/PA‐TBA, forming an intermingled nanofibrous mat, followed by a heating cycle. The product is a composite of crosslinked P(St‐co‐GMA)/PA‐TBA fibers fused by P(St‐co‐GMA) matrix. © 2016 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2016 , 133, 44090.     

New Octopus-like Phthalocyanines as Fullerene Receptors: Synthesis and Photophysical Investigation

Octopus-like zinc and magnesium phthalocyaninates bearing eight flexible benzylated diethylene glycol chains were synthesized and their interaction with fullerenes C₆₀ and C₇₀ was investigated by UV-Vis spectrophotometric titration, as well as by steady-state and time-resolved fluorescence spectroscopy in chloroform and toluene media. These measurements revealed a high affinity of receptors for C₆₀ and C₇₀, with selectivity to C₇₀: binding constants for C₇₀ are almost two times higher than for C₆₀. These results are interpreted by means of quantum-chemical calculations using the PM6-DH2 Hamiltonian. The binding constants also depend on both the nature of the metal ion in the receptor and the solvent. It is expected that the obtained molecules and supramolecular complexes can be used for further elaboration of optoelectronic donor-acceptor materials.     

Pt nanoparticles synthesized with new surfactants: improvement in C1–C3 alcohol oxidation catalytic activity

Platinum electrocatalysts were prepared using PtCl₄ as a starting material and 1-decylamine, N,N-dimethyldecylamine, 1-dodecylamine, N,N-dimethyldodecylamine, 1-hexadecylamine, and 1-octadecylamine as surfactants. These surfactants were used for the first time in this synthesis to determine whether the primary and/or tertiary structure and/or chain length of the surfactants, affects the size and/or activity of the catalysts in C₁–C₃ alcohol electro-oxidation reactions. Electrochemical measurements (cyclic voltammetry and chronoamperometry) indicated that the highest electrocatalytic performance was observed for the Pt nanocatalysts that were stabilized by N,N-dimethyldecylamine, and this has a tertiary amine structure with a short chain length (R = C₁₀H₂₁). The high performance may be due to the high electrochemical surface area, Pt(0)/Pt(IV) ratio, %Pt utility, and roughness factor (R _f). X-ray photoelectron spectroscopy, X-ray diffraction, atomic force microscopy, and transmission electron microscopy were used to determine the parameters that affect the catalytic activities.