Synchronization of diffusively-coupled limit cycle oscillators

We develop analytical and numerical conditions to determine whether limit cycle oscillations synchronize in diffusively coupled systems. We examine two classes of systems: reaction–diffusion PDEs with Neumann boundary conditions, and compartmental ODEs, where compartments are interconnected through diffusion terms with adjacent compartments. In both cases the uncoupled dynamics are governed by a nonlinear system that admits an asymptotically stable limit cycle. We provide two-time scale averaging methods for certifying stability of spatially homogeneous time-periodic trajectories in the presence of sufficiently small or large diffusion and develop methods using the structured singular value for the case of intermediate diffusion. We highlight cases where diffusion stabilizes or destabilizes such trajectories.     

Polyamorphism in Aluminum Nitride: A First Principles Molecular Dynamics Study

The high‐pressure behavior of amorphous aluminum nitride is investigated for the first time by means of ab initio molecular dynamics simulations. It is found to undergo two successive first‐order phase transformations with the application of pressure. The first one is a polyamorphic phase transition in which the low‐density amorphous phase transforms into a high‐density amorphous phase having an average coordination number of about 4.6. The high‐density amorphous structure transforms back to a low‐coordinated amorphous network upon pressure release but its density is higher than that of the original low‐density amorphous phase. The second phase change is the crystallization of the high‐density amorphous state into a rocksalt structure. A careful analysis suggests that the hexagonal‐like nanoclusters presented in amorphous aluminum nitride prevent the formation of a very dense amorphous phase (about sixfold coordinated) during the first phase transition and they act as a nucleation center for the crystallization process.     

Comparison of lactic acid bacteria diversity during the fermentation of Tarhana produced at home and on a commercial scale

Food Science and Biotechnology - In this study, lactic acid bacteria diversity during the fermentation of homemade and commercially prepared Tarhana, a traditional fermented cereal food from...     

The synthesis,characterisation and molecular structure of a new hetarylazoindole dye studied by X‐ray diffraction,spectral analysis and density functional theory calculation

1,2‐Dimethyl‐3‐(5‐methylisoxazol‐3‐yldiazenyl)‐1H‐indole was obtained by coupling 3‐amino‐5‐methylisoxazole with diazotised 1,2‐dimethylindole. It was characterised by proton and carbon nuclear magentic resonance, ultraviolet–visible, infrared and Raman spectra, and the X‐ray single crystal diffraction method. On the theoretical side, the molecular geometry, chemical shifts and the fundamental vibrational frequencies were evaluated using density functional theory. Time‐dependent density functional theory was used to evaluate the electronic excitation spectra. In addition, the scaled quantum mechanical approach was used to study the total energy distributions of the vibrational modes of the molecule. The results showed that the general agreement between experimental and calculated geometric parameters, chemical shifts and λ_max values are good. Excellent agreement was found between the calculated and experimental vibrational frequencies.     

Experimental investigation on flow improvement in compressor cascades

There is no general rule in the literature to help choose a correct flow control device for any given case of turbomachinery applications. This suggests individual optimization of flow control devices for each specific case. The objective of this study is to prove experimentally the benefits of passive control methods in improving the compressor performance. This allows to reduce the fuel consumption, leading to energy saving and reduction of atmospheric pollution. Two features have been controlled in this study: flow separation over the blade surfaces and the secondary flow over the cascade endwalls. Vortex generator ribs are tested on the blade suction side for flow reattachment on the blade surfaces, and low‐profile vortex generators are tested on the side walls of the compressor cascade against secondary flow losses. Different vortex generator designs are compared for total pressure recovery, flow turning, boundary layer characteristics, and pressure distributions over the endwalls. Copyright © 2016 John Wiley & Sons, Ltd.     

Hemodialysis‐related headache

Headache is one of the most frequently encountered neurological symptoms during hemodialysis. According to International Classification of Headache criteria dialysis‐related headache was defined as the headache occurring during hemodialysis with no specific characteristic. It resolves spontaneously within 72 hours after the hemodialysis session ends. There are few studies in the literature investigating the clinical features of dialysis headache. The pathophysiology of hemodialysis‐related headache is not known, but various triggering factors have been identified, including changes in blood pressure, serum sodium and magnesium levels during hemodialysis sessions, caffeine deprivation and stress. The aim of this article is to evaluate and analyze features of headache in patients undergoing hemodialysis.     

On an iterative deadlock prevention approach for automated manufacturing systems

In Hu (Transactions of the Institute of Measurement and Control 33:59–76, 2011), Petri nets are utilized to describe, analyse and control automated manufacturing systems (AMS). In order to suppress deadlock occurrences in AMS, a method to derive the bad markings iteratively using a mixed integer programming-based algorithm is proposed. To validate the effectiveness and efficiency of the proposed approach, two examples were demonstrated in Hu (Transactions of the Institute of Measurement and Control 33:59–76, 2011). This paper shows that the uncontrolled Petri net model in one of the examples is incorrect. It is also shown that the structural complexity of the computed monitors for both examples can be reduced with the same or more permissive system behaviours.     

Study on the behavior of the trace metal and macro minerals in Mytilus galloprovincialis as a bioindicator species: the case of Marmara Sea, Turkey

Sea food is a major source of animal protein. Marine foods are very rich sources of mineral components. The total content of minerals in the raw flesh of marine fish and invertebrates is in the range of 0.6–1.5% wet weight. The contents of Na, K, Ca, Mg and P are up to 1 mg/100 g, whereas those of Fe, Zn, I are less than 1 mg/100 g. Mussels (Mytilus galloprovincialis) were investigated for macro and trace element composition throughout the year. Ranges of moisture, ash, protein and fat contents were 79.76–87.46 g/100 g, 1.06–2.06 g/100 g, 7.28–12.65 g/100 g and 0.33–3.49 g/100 g, respectively. While the highest protein and fat values were found in the summer (July–August), the highest moisture and ash contents were found in the winter (December–January). The contents of highest Na, K, Ca were found in the summer. Cadmium, lead and copper were found to be below the legislative limits throughout year. High levels of mercury were found in January and October. It should be discussed whether mussel may provide an alternative source of mineral for healthy nutrition.     

Polymers for medical and tissue engineering applications

Recent decades have seen great advancements in medical research into materials, both natural and synthetic, that facilitate the repair and regeneration of compromised tissues through the delivery and support of cells and/or biomolecules. Biocompatible polymeric materials have become the most heavily investigated materials used for such purposes. Naturally‐occurring and synthetic polymers, including their various composites and blends, have been successful in a range of medical applications, proving to be particularly suitable for tissue engineering (TE) approaches. The increasing advances in polymeric biomaterial research combined with the developments in manufacturing techniques have expanded capabilities in tissue engineering and other medical applications of these materials. This review will present an overview of the major classes of polymeric biomaterials, highlight their key properties, advantages, limitations and discuss their applications. © 2014 Society of Chemical Industry