Monoterpene concentrations in fresh,senescent, and decaying foliage of singleleaf pinyon (Pinus monophylla Torr. & Frem.: Pinaceae) from the western Great Basin

Senescent foliage from pines is potentially a large contributor to the total monoterpene content of the litter layer, and the availability of these compounds as phytotoxins may result from release of these compounds into the vapor phase. In order to determine the fate of several monoterpene hydrocarbons in the natural environment, we examined their concentrations in fresh, senescent, and decaying needles from 32 single-leaf pinyon pine (Pinus monophylla Torr. & Frem.: Pinaceae) trees growing at two different locations. Total monoterpene content was highest in the fresh needles (mean=5.6 ± 2.2 mg/g extracted air dry weight), but also remained relatively high in senescent needles (mean=3.6 ±1.8 mg/g extracted air dry weight), either still attached to the tree or forming the freshest layer of understory litter. Decaying needles within a dark decomposing layer of litter material 5–20 cm from the surface were found to contain much lower amounts of total monoterpenes (average: =0.12 ±0.06 mg/g extracted air dry weight). Further investigation of the fate of these compounds in the pinyon understory is required to determine if these hydrocarbons are indeed exerting phytotoxic characteristics.     

Correlation of reactivity with chemical structure: Thermal hydrogenation of gas oils

The relationship between chemical structure and reactivity for thermal hydroprocessing was studied for five gas oils derived from Alberta bitumens. Chemical structure was characterized by combining data from ¹ H and ¹³ C nuclear magnetic resonance spectroscopy, class fractionation, and elemental analysis to calculate structural parameters. Thermal hydrotreating was performed in a continuous-flow stirred reactor at 420 and 440°C, 13.9 MPa hydrogen pressure, and 1.5 h¹ LHSV. Conversion of the 343–525°C boiling fraction of the gas oils was correlated with the concentration of naphthenic methylene groups in the feed. Formation of methane and ethane was dependent on the degree of condensation of the aromatic rings in the feed oils. Thermal desulfurization was highly correlated with the amount of saturates in the feed, and the aromaticity of the resin fraction. Hydrogen consumption increased with the aromaticity of the gas oil…     

Dynamics of ion beam modification of polymer films

Thin polymer films were irradiated in a high vacuum environment with energetic (～2 MeV) ions. The emitted molecular species were studied with a quadrupole mass spectrometer during bombardment. The emitted species are predominantly small molecules. The efficiency of emission depends strongly upon the electronic energy loss of the incident ions in the film and, hence, upon the velocity and atomic number of the incident ion. The emission efficiency of all species decreases with increasing damage in the film. By pulsing the ion beam, the time dependence of irradiation induced emission of molecular species from the films has been studied. Emission delays of hundreds of milliseconds are observed in some cases. These delays are found to depend upon the emitted species as well as the host film and seem to be associated with diffusion of the species in the films.     

Single mask fabrication process for movable MEMS devices

The current work reports on the realization of movable micromachining devices using self-aligned single-mask fabrication process. Only dry etching process utilizing inductively coupled plasma reactive ion etching was used to release 3D micro structures from single crystal silicon substrate. No wet etching process is required to release the structures as is the case with silicon on insulator (SOI) wafers. Also the developed process does not require an SOI substrate and accordingly dispensing with the application of a wet etching step, thus yielding uniform structures without stiction. The optimized process was applied to realize thermally actuated microgrippers. The article presents the development of the fabrication process and demonstrates the operation of the fabricated device. The optimized process provides an avenue for low cost fabrication of movable micromachining devices without the use of complicated wet etching steps typically associated with SOI substrates.     

Reactions on Single-Crystal Metal Surfaces Studied with Scanning Tunneling Microscopy

A review is given of scanning tunneling microscopy (STM) studies of reactions between different chemical species on metal surfaces. Results presented for a variety of systems show that STM can give unique insight at the atomic level into the mechanistic details of surface reactions and decomposition of molecules. This is illustated with a number of examples of reactions occuring on single-crystal metal surfaces, such as Ni(110), Cu(110), Ag (110), Rh (110), and Pt(111). The ability of the local STM probe to study the influence of defect sites on reactivity is highlighted, and similarities and differences in reactivity of different systems are discussed. Finally, the application of STM to enhance reactivity via tip interactions is addressed.     

A generalist herbivore in a specialist mode Metabolic,sequestrative, and defensive consequences

Adults of a generalist herbivore, the lubber grasshopper,Romalea guttata, can be converted to functional specialists by feeding them exclusively on catnip,Nepeta cataria. No obvious adverse effects on adult development resulted from this enforced monophagy. Notwithstanding the fact thatR. guttata has had no coevolutionary relationship with this Eurasian mint, it readily sequesters compounds that are identical to or derived from the terpenoid lactones that are characteristic ofN. cataria. R. guttata appears to both biomagnify minor allelochemicals and to sequester metabolites of theNepeta terpenes in its paired defensive glands. The levels of autogenously produced phenolics are not affected by feeding onN. cataria and the defensive secretions of catnip-fed grasshoppers are more repellent to ants than those of wild-fed acridids. Metabolites of theN. cataria monoterpenes are sequestered in the defensive glands when catnip is added to the natural diet ofR. guttata. The ability of a generalist,R. guttata, to facilely bioaccumulate a potpourri of foreign allelochemicals when feeding in a specialist mode is analyzed in terms of its biochemical, physiological, and functional significance. Sequestration is examined as a response to the enteric effronteries represented by the phytochemicals that can be characteristic of the overload in a monophagous diet.     

Occurrence of wax esters in the tissues of the organge roughy (Hoplostethus atlanticus)

The skin, skeleton and a fat-filled swim bladder of the orange roughy (Hoplostethus atlanticus) each contained greater than 20% lipid by wet weight which was almost entirely wax esters. These had carbon numbers of 34–40 consistent with the major fatty acid being 18∶1 and the major fatty alcohols being 16∶0, 18∶1, 20∶1 and 22∶1. In contrast, the liver and the roe contained appreciable quantities of glycerolipids with 18∶1 and 22∶6 as the major fatty acids.     

Ozone Treatment of Surface Water to Provide High Quality Cooling Water and Process Water

The characteristic feature of this cooling tower water treatment is the intermittent addition of ozone for several days.     

Ag-ZnO catalysts for UV-photodegradation of methylene blue

High surface area Ag-ZnO catalysts have been made by flame spray pyrolysis (FSP) and characterized by X-ray diffraction (XRD), nitrogen adsorption, UV–vis spectroscopy and electron microscopy (SEM and transmission electron microscopy (TEM)) combined with energy dispersive X-ray spectroscopy (EDXS) for elemental mapping. Silver metal clusters deposited directly on ZnO nanocrystals were obtained from this process. The Ag loading (1–5 at.%) controlled the Ag cluster size from 5 to 25 nm but did not influence the ZnO crystal size. Photodegradation of 10 ppm methylene blue (MB) solution was used to evaluate the performance of these FSP-made Ag-ZnO and was compared to wet-made Ag-ZnO and reference titania photocatalysts. The rate of photodegradation was optimal for Ag loading around 3 at.%. The best photocatalytic performance was exhibited by flame-made Ag-ZnO produced at the longest high-temperature residence times having high crystallinity as determined by XRD and UV–vis.     

Diterpene resin acids: Major active principles in tall oil against Variegated cutworm,Peridroma saucia (Lepidoptera: Noctuidae)

Tall oil, a by-product of the kraft process for pulping softwood, has been shown to have insecticidal properties. In the present study, the active principles in tall oil against the variegated cutworm,Peridroma saucia Hübner, were investigated. GC-MS analysis showed that abietic, dehydroabietic, and isopimaric acids were major resin acid components of crude tall oil and depitched tall oil. When crude tall oil samples of differing resin acid composition were incorporated into artificial diet at a concentration of 2.0% fresh weight, they suppressed larval growth by 45–60% compared to controls. This suppression was significantly (P0.05) correlated with the equivalent contents of abietic, dehydroabietic, isopimaric, and total resin acids. These results were also evident from a diet choice test, showing that the second-instar larvae obviously selected diets with low levels of resin acids when different diets were randomly arranged in a Petri dish. Bioassays with pure resin acids (abietic, dehydroabietic, and isopimaric acids) demonstrated that all individual chemicals have similar bioactivity against this insect. Comparison of the bioactivities of depitched tall oil and an equivalent mixture of pure resin acids in thePeridroma chronic growth bioassay indicated that pure resin acids and depitched tall oil share a common mode of action to this insect. This study confirms that resin acids are major active principles in tall oil against the variegated cutworm, but other chemicals likely also contribute to the bioactivity of tall oil.