Synthesis and structural characterization of an alternating double aquo-bridged and single cyano-bridged polymeric barium–iron complex: {[Ba2(phen)4(H2O)6Fe(CN)6]·Cl·2(phen)·3H2O}n

A new alternating double aquo-bridged and single cyano-bridged polymeric complex {[Ba₂(phen)₄(H₂O)₆Fe(CN)₆]·Cl·2(phen)·3H₂O}_n (1) (phen = 1,10-phenanthroline) has been synthesized and structurally characterized. In the crystal structure the two centrosymmetric [Ba₂(phen)₄(H₂O)₆] units are bridged through two trans CN groups of [Fe(CN)₆]³⁻ ion, which results in the formation of a zig-zag polymeric chain. In each [Ba₂(phen)₄(H₂O)₆] unit, the two Ba centers are joined by double aquo bridges. Both the Ba atoms are 9-coordinated with distorted mono-capped square antiprismatic geometry. An elaborate hydrogen bonding system holds the parallel polymeric chains together.     

Influence of Different Additives on the Interaction of Quinolone Antibiotic Drug with Surfactant: Conductivity and Cloud Point Measurement Study

Conductometric and cloud point (CP) measurement studies have been performed to investigate the interaction of tetradecyltrimethylammonium bromide (TTAB) and Triton® X-100 (TX-100) with ciprofloxacin hydrochloride (CFH) in different solvents over the temperature range of 295.15–315.15 K. CFH is used for the treatment of various bacterial infections. The observed critical micelle concentration (CMC) values of TTAB were found to be reduced in the presence of electrolytes (Na₂SO₄/Na₃PO₄), and this reduction proceeds with the elevation of salt concentration. The order of the CMC of TTAB follows the trend: > >. The observed CMC values of TTAB were found to increase with increasing temperature and decrease with increasing concentration of CFH in aqueous medium. The values of Gibbs free energy of micellization () for the TTAB/TTAB + CFH mixture were found to be negative, implying spontaneous micellization. The estimated CP of TX-100 decreases with increasing concentration of TX-100 in aqueous medium. The CP values first decrease with increasing concentration of CFH and then increase at higher concentration of CFH almost in all cases investigated. The values of free energy of clouding were found to be positive in all cases studied implying that phase separation of TX-100 was nonspontaneous. The other thermodynamic parameters associated with the micellization of TTAB and the phase separation of TX-100 were estimated and explained.     

A Novel Highly Sensitive Humidity Sensor Based on ZnO/SBA‐15 Hybrid Nanocomposite

This work deals with the study of hydrothermally synthesized zinc oxide (ZnO) loaded mesoporous SBA‐15 hybrid nanocomposite for relative humidity sensing (RH) at room temperature. The sensor exhibits an excellent ~5 orders impedance change along with excellent linearity, quick response time (17 s), rapid recovery time (18 s), negligible hysteresis (1.2%), good repeatability, and stability (1.8%) in 11%–98% RH range. In addition, complex impedance spectra of the sensor at different RHs were analyzed to understand the humidity sensing mechanism. Our study can open a new way for realizing ZnO/SBA‐15 hybrid nanocomposite for fabrication of high‐performance RH sensors.     

Thermal behavior of mullite between 4 K and 1320 K

The evolution of metric parameters of 2:1 and 3:2 mullites have been measured between 4 K and 1320 K using neutron and X‐ray powder diffraction. Negative thermal expansion was observed at low temperature for the a‐cell parameter and consequently for the cell‐volume, which is more pronounced for 2:1 mullite than those for 3:2 mullite. Each parameter is simulated using Grüneisen first‐order approximation for the zero pressure equation of state at 0 K, where the vibrational energy was calculated using microscopic approach. While the b‐ and c‐cell parameters require only one Debye term, a second Debye spectrum with negative Grüneisen parameter was required to fit the a‐cell parameter as well as the cell volume. At 4 K, 300 K and 1320 K the model, respectively, calculates the volume thermal expansion coefficients of 0.09x10^?6 K^?1, 9x10^?6 K^?1, and 17.3x10^?6 K^?1 for 2:1 mullite, and 0.09x10^?6 K^?1, 8.7x10^?6 K^?1, and 17.3x10^?6 K^?1 for 3:2 mullite. Temperature‐dependent Raman spectra and phonon density of states hint for the possible microscopic sources of the cell contraction at low temperature. A simple polynomial approach is presented to calculate the elastic stiffness coefficients of the 3:2 mullite, which are not available from experiments.     

Effect of oxirane groups on curing behavior and thermal stability of vinyl ester resins

The effects of oxirane groups in vinyl ester (VE) resin and reactive diluent on curing characteristics and thermal behavior of cured resins are described. Stoichiometric (0.5:1, sample A) as well as nonstoichiometric (0.5:0.85, sample B) ratios of the diglycidyl ether of bisphenol-A (DGEBA) and methacrylic acid (MA) were used for the synthesis of VE resins. Resin sample B had more residual epoxy groups because of the stoichiometric imbalance of the reactants. VE resins thus obtained were diluted with methyl methacrylate (MMA; 1:1, w/w), and controlled quantities of epoxy groups were introduced by partial replacement of MMA with glycidyl methacrylate (GMA), keeping the overall ratio of resin and reactive diluent constant. Increase of GMA content in resin A or B resulted in a decrease in gel time, indicating that the curing reaction is facilitated by the presence of epoxy groups. An increase in initiator content also reduced the gel time. In the differential scanning calorimetry (DSC) scans, a sharp curing exotherm was observed in the temperature range 107 ± 3–150 ± 1 °C. The onset temperature (T_onset) and peak exotherm temperature (T_exo) decreased with increase in GMA content. Heat of curing (ΔH) also increased with increase in GMA content. A broad exotherm was observed after the initial sharp exotherm that was attributed to the etherification reaction. Cured VE resins were stable up to 250–260 °C, and started losing weight above this temperature. Rapid decomposition was observed in the temperature range 400–500 °C. © 2001 John Wiley & Sons, Inc. J Appl Polym Sci 82: 416–423, 2001     

Method for testing sliding frictional response of lubricious thin films used in plastic medical syringes

Lubricious thin films are used in plastic medical syringes in order to reduce the frictional forces between the syringe barrel and the rubber plunger. Polydimethylsiloxane (PDMS) liquid films are the current accepted technology for reducing the friction forces in plastic medical syringes. However, major issues with these PDMS films exist, including interactions of the film with the stored injectable drugs and variations in the frictional response as the syringes are aged over time. A new silicon based, lubricious octamethylcyclotetrasiloxane (L-OMCTS) thin film solid lubricant has been developed as a replacement for PDMS that provides acceptable and stable frictional responses without interacting with injectable drugs. A novel test method has been developed that can be used to successfully characterise the sliding frictional response of the L-OMCTS thin films at the syringe barrel and plunger interface. This test method will be used to provide future insight into how the frictional response of the L-OMCTS thin films is affected by various system parameters. This paper will mainly discuss the design of this new test method and provide some preliminary frictional response data.     

Initial rapid wetting in metallic systems

The initial rapid wetting of a solid surface by a liquid phase is an important step in many industrial processes. Liquid-phase sintering of powder metallurgical steels is one such industrial process, where metallic powders of micrometer size are used. Investigating the dynamic wetting of a high-temperature metallic drop of micrometer size experimentally is very challenging. Here, a phase-field-based numerical model is first implemented and verified by accurately capturing the initial dynamic wetting of millimeter-sized metal drops and then the model is extended to predict the dynamic wetting of a micrometer-sized metal drop. We found, in accordance with recent observations, that contact line friction is required for accurate simulation of dynamic wetting. Our results predict the wetting time for a micrometer-sized metal drop and also indicate that the dynamic wetting patterns at the micro- and millimeter length scales are qualitatively similar. We also found that the wetting process is much faster for a micrometer-sized metal drop compared to a millimeter-sized metal drop.     

Distinctive Microbial Signatures and Gut-Brain Crosstalk in Pediatric Patients with Coeliac Disease and Type 1 Diabetes Mellitus

Coeliac disease (CD) and Type 1 diabetes mellitus (T1DM) are immune-mediated diseases. Emerging evidence suggests that dysbiosis in the gut microbiome plays a role in the pathogenesis of both diseases and may also be associated with the development of neuropathy. The primary goal in this cross-sectional pilot study was to identify whether there are distinct gut microbiota alterations in children with CD (n = 19), T1DM (n = 18) and both CD and T1DM (n = 9) compared to healthy controls (n = 12). Our second goal was to explore the relationship between neuropathy (corneal nerve fiber damage) and the gut microbiome composition. Microbiota composition was determined by 16S rRNA gene sequencing. Corneal confocal microscopy was used to determine nerve fiber damage. There was a significant difference in the overall microbial diversity between the four groups with healthy controls having a greater microbial diversity as compared to the patients. The abundance of pathogenic proteobacteria Shigella and E. coli were significantly higher in CD patients. Differential abundance analysis showed that several bacterial amplicon sequence variants (ASVs) distinguished CD from T1DM. The tissue transglutaminase antibody correlated significantly with a decrease in gut microbial diversity. Furthermore, the Bacteroidetes phylum, specifically the genus Parabacteroides was significantly correlated with corneal nerve fiber loss in the subjects with neuropathic damage belonging to the diseased groups. We conclude that disease-specific gut microbial features traceable down to the ASV level distinguish children with CD from T1DM and specific gut microbial signatures may be associated with small fiber neuropathy. Further research on the mechanisms linking altered microbial diversity with neuropathy are warranted.     

Effect of AlN addition on the electrical resistivity of pressureless sintered SiC ceramics with B4C and C

The effect of 0–12 wt% AlN addition on the electrical resistivity of SiC ceramics pressureless sintered with 0.7 wt% B₄C and 2.5 wt% C additives was investigated. The elemental analysis of SiC grains revealed a codoping of Al and N in the SiC lattice with a higher N concentration with 1 wt% AlN addition and a higher Al concentration with 12 wt% AlN addition. The electrical resistivity decreased by four orders of magnitude (1.7 × 10⁵ → 8.3 × 10¹ Ω cm) with 1 wt% AlN addition due to the increased carrier density (1.7 × 10¹⁰ → 2.3 × 10¹⁵ cm⁻³) caused by excess N-derived donors. However, subsequent AlN addition (4 → 12 wt%) led to an increase (2.9 × 10³ → 1.2 × 10⁴ Ω‧cm) in electrical resistivity due to (1) increased Al dopants which act as deep acceptors for trapping N-derived carriers causing a decrease in carrier density (2.3 × 10¹⁵ → 5.9 × 10¹³ cm⁻³), (2) the formation of electrically insulating SiC-AlN solid solution, and (3) the presence of electrically insulating AlN grains at the grain boundaries.