Selective separation and concentration of Pd(II) from Fe(III), Co(II), Ni(II), and Cu(II) ions using thiourea‐formaldehyde resin

Thiourea‐formaldehyde (TUF), a well‐known chelating resin, has been synthesized and it was used in the adsorption, selective separation, and concentration of Pd(II) ions from Fe(III), Co(II) Ni(II), and Cu(II) base metal ions. The composition of the synthesized resin was determined by elemental analysis. The effect of initial acidity/pH and the adsorption capacity for Pd(II) ions were studied by batch technique. The adsorption and separation of Pd(II) were then examined by column technique. FTIR spectra and SEM/EDS analysis were also recorded before and after the adsorption of Pd(II). The optimum pH was found to be 4 for the adsorption. The adsorption data fitted well to the Langmuir isotherm. The maximum adsorption capacity of the TUF resin for Pd(II) ions was found to be 31.85 mg g⁻¹ (0.300 mmol g⁻¹). Chelating mechanism was effective in the adsorption. Pd(II) ions could be separated efficiently from Fe(III), Cu(II), Ni(II), and Co(II) ions using TUF resin. © 2011 Wiley Periodicals, Inc. J Appl Polym Sci, 2011     

Compressive mechanical properties of sawdust/high density polyethylene composites under various strain rate loadings

This article is concerned with the static and dynamic mechanical properties of high‐density polyethylene (HDPE) reinforced with sawdust (SD) at a strain rate of up to 10³ s^?1. In this study, the static and dynamic properties of HDPE/SD composites with different filler loadings of 5, 10, 15, 20, and 30 wt% SD were deliberated at different levels of strain rates (0.001, 0.01, 0.1, 650, 900, and 1100 s^?1) using a conventional universal testing machine and the split Hopkinson pressure bar apparatus. The results showed that the stress–strain curves, yield behavior, stiffness, and strength properties of the HDPE/SD composites were strongly affected by both the strain rate and the filler loadings. Furthermore, the rate sensitivityof the HDPE/SD composites showed a great dependency on the applied strain rate, increasing as the strain rate increased. However, the thermal activation values showed a contrary trend. Meanwhile, for the postdamage analysis, the results showed that the applied strain rates influenced the deformation behavior of the tested HDPE/SD composites. Moreover, for the fractographic analysis at dynamic loading, the composites showed that all the specimens underwent a severe catastrophic deformation. J. VINYL ADDIT. TECHNOL., 24:162–173, 2018. © 2016 Society of Plastics Engineers     

The influence of annealing on the crystallization and tribological behavior of MWNT/PEEK nanocomposites

In this study, annealing influence on crystallization and scratch behavior of neat and multi‐wall carbon nanotube (MWNT) reinforced poly(ether ether ketone) (PEEK) nanocomposites have been investigated. Crystallization behavior of normal and annealed samples was investigated by using differential scanning calorimeter (DSC). Scratch behavior of normal and annealed samples was investigated by using micro scratch tester. In DSC analysis, it was detected that, melting enthalpy of annealed neat PEEK was increased sharply when compared to neat PEEK. Melting enthalpies of annealed PEEK nanocomposites prepared with addition of up to 1 wt% MWNT were increased with a decreased trend. However, nanocomposites with higher contents of MWNTs (>1 wt%) were dramatically affected by annealing process and melting enthalpy decreased sharply. Friction coefficient values of “annealed MWNT reinforced PEEK composites” were found to be lower than “normal PEEK composites.” Annealing process affects scratch hardness of both annealed and MWNT reinforced PEEK. Annealed nanocomposites with various MWNT concentrations showed higher scratch hardness values than normal PEEK nanocomposites. POLYM. COMPOS., 2011. © 2011 Society of Plastics Engineers     

Optical whitening of cationised cotton: effect on whiteness and whiteness tint

In this study, the effect of cationisation on optical whitening was examined. For this purpose, the whiteness index and whiteness tint of optically whitened pre‐cationised knitted cotton fabrics were analysed. The cationisation and optical whitening processes were carried out under different concentration levels, using the exhaustion method. The whiteness index and whiteness tint were calculated after colour measurements were taken. The experimental results were also analysed statistically using ANOVA. The whiteness index obtained from cationised fabric was lower than that of non‐cationised fabrics. While the whiteness tint of cationised cotton fabric had a blue to greenish nuance, the non‐cationised fabric had a reddish nuance.     

Nondegradative additive manufacturing of medical grade copolyesters of high molecular weight and with varied elastic response

Although additive manufacturing through melt extrusion has become increasingly popular as a route to design scaffolds with complex geometries the technique if often limited by the reduction in molecular weight and the viscoelastic response when degradable aliphatic polyesters of high molecular weight are used. Here we use a melt extruder and fused filament fabrication printer to produce a reliable nondegradative route for scaffold fabrication of medical grade copolymers of L-lactide, poly(ε-caprolactone-co-L-lactide), and poly(L-lactide-co-trimethylene carbonate). We show that degradation is avoided using filament extrusion and fused filament fabrication if the process parameters are deliberately chosen based upon the rheological behavior, mechanical properties, and polymer composition. Structural, mechanical, and thermal properties were assessed throughout the process to obtain comprehension of the relationship between the rheological properties and the behavior of the medical grade copolymers in the extruder and printer. Scaffolds with a controlled architecture were achieved using high-molecular-weight polyesters exhibiting a large range in the elastic response causing negligible degradation of the polymers. © 2019 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2020 , 137, 48550.     

Bioactive and Physicochemical Properties of Persimmon as Affected by Drying Methods

In this study, the effects of three different drying methods (freeze drying, oven drying, and vacuum oven drying) on bioactive (total phenolics, total flavonoids, condensed tannin and total hydrolyzable tannin contents, antiradical activity, and antidiabetic activity) and some physicochemical (dry matter, ash, water activity (a _w ), color, protein, hydroxymethylfurfural, glucose and fructose content) properties of persimmon fruit were investigated. Simplex lattice mixture design methodology was applied to determine the best solvent mixture for the extraction of phenolics from the samples. It was found that the mixture of acetone:water at the ratio of 50:50 % (v/v) was the best solvent mixture for the extraction. The persimmon powder sample obtained from freeze drying showed significantly (p <0.05) higher bioactivity values than oven- and vacuum-oven-dried samples. Antiradical activity changed significantly depending on the drying method employed and it was superior in freeze-dried samples than that of the other drying methods.     

Ring Opening of Epoxidized Soybean Oil with Compounds Containing Two Different Functional Groups

Epoxidized vegetable oils are desirable chemicals due to their eco‐friendly characteristics and their being a major source of many green products. Ring opening is one of the ways to convert these epoxidized oils to some new intermediates. The use of mono‐functional amines, alcohols, acid anhydrides and thioethers for epoxy ring opening has been reported in the literature. In this study, thioglycolic acid (TGA) bearing thiol and carboxylic acid as two different functional groups and methyl ester of thioglycolic acid (TGAME) were used. Currently, there is no reported literature describing epoxy ring opening using chemicals bearing two different functional groups simultaneously. In this way, two new polyols were synthesized, one with TGA (polyol 1) and one with TGAME (polyol 2). FTIR and ¹H‐ and ¹³C‐NMR spectroscopy confirmed that the ring was opened by the carboxylic acid group of TGA, and the thiol group was not involved in the ring opening whereas the ring was opened by the thiol group in the case of TGAME.     

Comparison of the pomegranate seed oil organogels of carnauba wax and monoglyceride

The aims of this study were to prepare organogels from pomegranate seed oil (PO) with carnauba wax (CW) and monoglyceride (MG), compare the organogels with a commercial margarine (CM) and evaluate 3 months storage stability. At 3% organogelator addition, no gels were formed, while at 7 and 10% additions, the oil binding capacities increased and were always higher in CW organogels, with crystal formation times of 8.0 to 14.0 min. Solid fat content (SFC) of the CW organogels varied between 2.96 and 8.71% at 20°C, while MG gels had 2.89–9.43%, and CM had 29.73% SFC. The peak melting temperatures of the CW organogels ranged from 74.73 to 75.74°C and MG organogels ranged from 11.09 to 50.63°C, whereas CM product exhibited 45.92°C peak melting temperature. The hardness of CW organogels was higher than that of MG organogels. The organogels showed potential as spreadable products. © 2014 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 41343.     

Equilibrium,kinetics, and thermodynamics of Pd(II) adsorption onto poly(m‐aminobenzoic acid) chelating polymer

This study describes the equilibrium, kinetics, and thermodynamics of the palladium(II) (Pd(II)) adsorption onto poly(m‐aminobenzoic acid) (p‐mABA) chelating polymer. The p‐mABA was synthesized by the oxidation reaction of m‐aminobenzoic acid monomer with ammonium peroxydisulfate (APS). The synthesized p‐mABA chelating polymer was characterized by FTIR spectroscopy, gel permeation chromatography (GPC), thermal analysis, potentiometric titration, and scanning electron microscopy (SEM) analysis methods. The effects of the acidity, temperature, and initial Pd(II) concentration on the adsorption were examined by using batch adsorption technique. The optimum acidity for the Pd(II) adsorption was determined as pH 2. In the equilibrium studies, it was found that the Pd(II) adsorption capacity of the polymer was to be 24.21 mg/g and the adsorption data fitted better to the Langmuir isotherm than the Freundlich isotherm. The kinetics of the adsorption fitted to pseudo‐second‐order kinetic model. In the thermodynamic evaluation of the adsorption, the ΔG° values were calculated as ?16.98 and ?22.26 kJ/mol at 25–55°C temperatures. The enthalpy (ΔH°), entropy (ΔS°), and the activation energy (E_a) were found as 35.40 kJ/mol, 176.05 J/mol K, and 61.71 kJ/mol, respectively. The adsorption of Pd(II) ions onto p‐mABA was a spontaneous, endothermic, and chemical adsorption process which is governed by both ionic interaction and chelating mechanisms. © 2015 Wiley Periodicals, Inc. J. Appl. Polym. Sci. 2015 , 132, 42533.