Graphene oxide-containing isocyanate-based polyimide foams: Enhanced thermal stability and flame retardancy

Isocyanate-based graphene oxide-containing polyimide foams were synthesized by a semi-prepolymer method. In this method, while the first solution containing pre-polymer was derived from pyromellitic dianhydride and excess polymethylene polyphenylene isocyanate (PM200), the second solution contains dianhydride derivatives, water, catalysts, surfactants, and graphene oxide. PIFs were prepared with 0%, 0.25%, 0.50%, 0.75%, and 1% graphene oxide by weight, respectively. PIFs exhibited a minimum side reaction and urea generation was not seen for all PIFs instead of imide bonding. The addition of graphene oxide (GO) leads to a more close-packed structure. Therefore, crosslinking density and thermal stability of graphene oxide-containing polyimide foams increased. Upon the addition of 1% GO, almost seven times higher compression strength was obtained compared to neat PIFs. Also, LOI values supported the theory that thermally stable and flame retardant PIFs can be synthesized via the isocyanate-based process with GO.     

Topology-Aware Multiple Routing Configurations for Fault Tolerant Networking

Real-time services require reliable and fault tolerant communication networks to support their stringent Quality of Service requirements. Multi Topology Routing based IP Fast Re-route (MT-IPFRR) technologies provide seamless forwarding of IP packets during network failures by constructing virtual topologies (VTs) to re-route the disrupted traffic. Multiple Routing Configurations (MRC) is a widely studied MT-IPFRR technique. In this paper, we propose two heuristics, namely mMRC-1 and mMRC-2, to reduce the number of VTs required by the MRC to provide full coverage for single link/node failures, and hence, to decrease its operational complexity. Both heuristics are designed to construct more robust VTs against network partitioning by taking their topological characteristics into consideration. We perform extensive experiments on 3200 topologies with diverse structural properties using our automated topology generation and analysis tool. Numerical results show that the amount of reductions in VT requirements get higher up to 31.84 %, as the networks tend to have more hub nodes whose degree is much higher than the rest of the network.     

Exploiting SSDs in operational multiversion databases

Multiversion databases store both current and historical data. Rows are typically annotated with timestamps representing the period when the row is/was valid. We develop novel techniques to reduce index maintenance in multiversion databases, so that indexes can be used effectively for analytical queries over current data without being a heavy burden on transaction throughput. To achieve this end, we re-design persistent index data structures in the storage hierarchy to employ an extra level of indirection. The indirection level is stored on solid-state disks that can support very fast random I/Os, so that traversing the extra level of indirection incurs a relatively small overhead. The extra level of indirection dramatically reduces the number of magnetic disk I/Os that are needed for index updates and localizes maintenance to indexes on updated attributes. Additionally, we batch insertions within the indirection layer in order to reduce physical disk I/Os for indexing new records. In this work, we further exploit SSDs by introducing novel DeltaBlock techniques for storing the recent changes to data on SSDs. Using our DeltaBlock, we propose an efficient method to periodically flush the recently changed data from SSDs to HDDs such that, on the one hand, we keep track of every change (or delta) for every record, and, on the other hand, we avoid redundantly storing the unchanged portion of updated records. By reducing the index maintenance overhead on transactions, we enable operational data stores to create more indexes to support queries. We have developed a prototype of our indirection proposal by extending the widely used generalized search tree open-source project, which is also employed in PostgreSQL. Our working implementation demonstrates that we can significantly reduce index maintenance and/or query processing cost by a factor of 3. For the insertion of new records, our novel batching technique can save up to 90 % of the insertion time. For updates, our prototype demonstrates that we can significantly reduce the database size by up to 80 % even with a modest space allocated for DeltaBlocks on SSDs.     

Implementation of Envelope Analysis on a Wireless Condition Monitoring System for Bearing Fault Diagnosis

 Envelope analysis is an effective method for characterizing impulsive vibrations in wired condition monitoring (CM) systems. This paper depicts the implementation of envelope analysis on a wireless sensor node for obtaining a more convenient and reliable CM system. To maintain CM performances under the constraints of resources available in the cost effective Zigbee based wireless sensor network (WSN), a low cost cortex-M4F microcontroller is employed as the core processor to implement the envelope analysis algorithm on the sensor node. The on-chip 12 bit analog-to-digital converter (ADC) working at 10 kHz sampling rate is adopted to acquire vibration signals measured by a wide frequency band piezoelectric accelerometer. The data processing flow inside the processor is optimized to satisfy the large memory usage in implementing fast Fourier transform (FFT) and Hilbert transform (HT). Thus, the envelope spectrum can be computed from a data frame of 2048 points to achieve a frequency resolution acceptable for identifying the characteristic frequencies of different bearing faults. Experimental evaluation results show that the embedded envelope analysis algorithm can successfully diagnose the simulated bearing faults and the data transmission throughput can be reduced by at least 95% per frame compared with that of the raw data, allowing a large number of sensor nodes to be deployed in the network for real time monitoring.     

A Channel Model for Underground Sensor Networks in the Mixture of Crude Oil,Water and Soil

Future enhanced oil recovery technology can greatly benefit from the wireless sensor networks to effectively operate in underground oil reservoirs. In such a case, millimeter scale sensor nodes with antennas at the same scale have to be deployed in the confined underground oil reservoir fractures. This necessitates the sensor nodes to be operating in the THz frequency range. In this paper, the propagation based on electromagnetic （EM） waves in the Terahertz band （0.1-120.0 THz） through a crude oil/water mixture and soil medium is analyzed in order to explore its applicability in underground oil reservoir assessments. The developed model evaluates the total path loss and the absorption loss that an EM wave experiences when propagating through the crude oil/water mixture and soil medium. Our results show that sensors can communicate successfully for distances up to 1 cm. Furthermore, we have determined the existence of two transmission bands, in which the path loss is below 100 dB. Among those, the frequency window, which provides the best performance, is determined as 70 THz to 85 THz. Different path and absorption loss schemes are considered, which suggests that the 70 THz to 85 THz band is suitable for sensor communications in a medium of crude oil/water mixture and soil.     

Multi-rate model predictive control of particle size distribution in a semibatch emulsion copolymerization reactor

A multi-rate model predictive controller algorithm is presented for the in-batch closed-loop control of the full particle size distribution (PSD) in a semibatch emulsion copolymerization system. The lack of frequent measurements of the PSD and the measurement delay of these measurements are addressed through the use of frequent density measurements from which the current conditions of the system are estimated. The high dimensionality of the discretized full PSD is reduced by the use of model order reduction based on principal component analysis. This method effectively reduces the size of the problem while preserving the main characteristics of the population balance system. Disturbances that perturb the surfactant and monomer amounts inside the semibatch vinyl acetate–butyl acrylate reactor are considered to demonstrate the performance of the proposed control algorithm.     

Artificial Algae Optimization with Deep Belief Network Enabled Ransomware Detection in IoT Environment

The Internet of Things (IoT) has gained more popularity in research because of its large-scale challenges and implementation. But security was the main concern when witnessing the fast development in its applications and size. It was a dreary task to independently set security systems in every IoT gadget and upgrade them according to the newer threats. Additionally, machine learning (ML) techniques optimally use a colossal volume of data generated by IoT devices. Deep Learning (DL) related systems were modelled for attack detection in IoT. But the current security systems address restricted attacks and can be utilized outdated datasets for evaluations. This study develops an Artificial Algae Optimization Algorithm with Optimal Deep Belief Network (AAA-ODBN) Enabled Ransomware Detection in an IoT environment. The presented AAA-ODBN technique mainly intends to recognize and categorize ransomware in the IoT environment. The presented AAA-ODBN technique follows a three-stage process: feature selection, classification, and parameter tuning. In the first stage, the AAA-ODBN technique uses AAA based feature selection (AAA-FS) technique to elect feature subsets. Secondly, the AAA-ODBN technique employs the DBN model for ransomware detection. At last, the dragonfly algorithm (DFA) is utilized for the hyperparameter tuning of the DBN technique. A sequence of simulations is implemented to demonstrate the improved performance of the AAA-ODBN algorithm. The experimental values indicate the significant outcome of the AAA-ODBN model over other models.     

Political Optimizer with Deep Learning-Enabled Tongue Color Image Analysis Model

Biomedical image processing is widely utilized for disease detection and classification of biomedical images. Tongue color image analysis is an effective and non-invasive tool for carrying out secondary detection at anytime and anywhere. For removing the qualitative aspect, tongue images are quantitatively inspected, proposing a novel disease classification model in an automated way is preferable. This article introduces a novel political optimizer with deep learning enabled tongue color image analysis (PODL-TCIA) technique. The presented PODL-TCIA model purposes to detect the occurrence of the disease by examining the color of the tongue. To attain this, the PODL-TCIA model initially performs image pre-processing to enhance medical image quality. Followed by, Inception with ResNet-v2 model is employed for feature extraction. Besides, political optimizer (PO) with twin support vector machine (TSVM) model is exploited for image classification process, shows the novelty of the work. The design of PO algorithm assists in the optimal parameter selection of the TSVM model. For ensuring the enhanced outcomes of the PODL-TCIA model, a wide-ranging experimental analysis was applied and the outcomes reported the betterment of the PODL-TCIA model over the recent approaches.